From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.79.tang@gmail.com>,
feng.tang@intel.com, "Rafael J. Wysocki" <rafael@kernel.org>,
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Steven Rostedt <rostedt@goodmis.org>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
linux-arch@vger.kernel.org, Rik van Riel <riel@redhat.com>,
"Srivatsa S. Bhat" <srivatsa@mit.edu>,
Peter Zijlstra <peterz@infradead.org>,
Arjan van de Ven <arjan@linux.intel.com>,
Rusty Russell <rusty@rustcorp.com.au>,
Oleg Nesterov <oleg@redhat.com>, Tejun Heo <tj@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Paul McKenney <paulmck@linux.vnet.ibm.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
Paul Turner <pjt@google.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
"Zhang, Rui" <rui.zhang@intel>
Subject: Re: S3 resume regression [1cf4f629d9d2 ("cpu/hotplug: Move online calls to hotplugged cpu")]
Date: Fri, 28 Oct 2016 18:56:03 +0300 [thread overview]
Message-ID: <20161028155603.GI4617@intel.com> (raw)
In-Reply-To: <alpine.DEB.2.20.1610272238390.4913@nanos>
On Thu, Oct 27, 2016 at 10:41:18PM +0200, Thomas Gleixner wrote:
> On Thu, 27 Oct 2016, Ville Syrjälä wrote:
> > On Thu, Oct 27, 2016 at 09:25:05PM +0200, Thomas Gleixner wrote:
> > > So it would be interesting whether that hunk in resume_broadcast() is
> > > sufficient.
> >
> > So far it looks like the answer is yes.
> >
> > Looks to be about 5 seconds slower than acpi-idle in resuming, but
> > I suppose that's not all that surprising ;)
>
> Well, set it to 1msec then. If that works reliably then we really can do
> that unconditionally. There is no harm in firing a useless timer during
> resume once.
I narrowed down the required timeout, and looks like 25ms is the
minimum that works. With 24ms I already started to have failures. So
maybe just bump it up by an order of magnitude to 250ms for some
safety margin?
In any case I think I'll leave the machine running S3 cycles over the
weekend with the 25ms timeout just to see if it will eventually fail.
--
Ville Syrjälä
Intel OTC
WARNING: multiple messages have this Message-ID (diff)
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.79.tang@gmail.com>,
feng.tang@intel.com, "Rafael J. Wysocki" <rafael@kernel.org>,
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Steven Rostedt <rostedt@goodmis.org>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
linux-arch@vger.kernel.org, Rik van Riel <riel@redhat.com>,
"Srivatsa S. Bhat" <srivatsa@mit.edu>,
Peter Zijlstra <peterz@infradead.org>,
Arjan van de Ven <arjan@linux.intel.com>,
Rusty Russell <rusty@rustcorp.com.au>,
Oleg Nesterov <oleg@redhat.com>, Tejun Heo <tj@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Paul McKenney <paulmck@linux.vnet.ibm.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
Paul Turner <pjt@google.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
"Zhang, Rui" <rui.zhang@intel.com>,
Len Brown <len.brown@intel.com>,
Linux PM <linux-pm@vger.kernel.org>,
Linux ACPI <linux-acpi@vger.kernel.org>
Subject: Re: S3 resume regression [1cf4f629d9d2 ("cpu/hotplug: Move online calls to hotplugged cpu")]
Date: Fri, 28 Oct 2016 18:56:03 +0300 [thread overview]
Message-ID: <20161028155603.GI4617@intel.com> (raw)
Message-ID: <20161028155603.cLQGIZ5kyXusejOR7p_BSYkLNMXwnrapzwL8jCFDbAM@z> (raw)
In-Reply-To: <alpine.DEB.2.20.1610272238390.4913@nanos>
On Thu, Oct 27, 2016 at 10:41:18PM +0200, Thomas Gleixner wrote:
> On Thu, 27 Oct 2016, Ville Syrjälä wrote:
> > On Thu, Oct 27, 2016 at 09:25:05PM +0200, Thomas Gleixner wrote:
> > > So it would be interesting whether that hunk in resume_broadcast() is
> > > sufficient.
> >
> > So far it looks like the answer is yes.
> >
> > Looks to be about 5 seconds slower than acpi-idle in resuming, but
> > I suppose that's not all that surprising ;)
>
> Well, set it to 1msec then. If that works reliably then we really can do
> that unconditionally. There is no harm in firing a useless timer during
> resume once.
I narrowed down the required timeout, and looks like 25ms is the
minimum that works. With 24ms I already started to have failures. So
maybe just bump it up by an order of magnitude to 250ms for some
safety margin?
In any case I think I'll leave the machine running S3 cycles over the
weekend with the 25ms timeout just to see if it will eventually fail.
--
Ville Syrjälä
Intel OTC
next prev parent reply other threads:[~2016-10-28 15:56 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 10:19 S3 resume regression [1cf4f629d9d2 ("cpu/hotplug: Move online calls to hotplugged cpu")] Ville Syrjälä
2016-05-11 10:19 ` Ville Syrjälä
2016-05-11 12:11 ` Sebastian Andrzej Siewior
2016-05-11 12:21 ` Ville Syrjälä
2016-05-11 12:24 ` Sebastian Andrzej Siewior
2016-05-11 12:41 ` Ville Syrjälä
2016-05-11 12:44 ` Steven Rostedt
2016-05-11 13:34 ` Ville Syrjälä
2016-05-16 19:39 ` Ville Syrjälä
2016-05-17 23:14 ` Rafael J. Wysocki
2016-05-17 23:14 ` Rafael J. Wysocki
2016-05-18 7:24 ` Ville Syrjälä
2016-05-18 7:24 ` Ville Syrjälä
2016-05-26 18:32 ` Ville Syrjälä
2016-05-30 20:43 ` Rafael J. Wysocki
2016-05-31 7:26 ` Ville Syrjälä
2016-05-31 7:26 ` Ville Syrjälä
2016-07-13 14:54 ` Ville Syrjälä
2016-07-13 14:54 ` Ville Syrjälä
2016-07-14 8:29 ` Feng Tang
2016-07-14 8:29 ` Feng Tang
2016-08-09 17:20 ` Ville Syrjälä
2016-08-09 17:20 ` Ville Syrjälä
2016-10-27 17:28 ` Ville Syrjälä
2016-10-27 17:28 ` Ville Syrjälä
2016-10-27 18:48 ` Thomas Gleixner
2016-10-27 18:48 ` Thomas Gleixner
2016-10-27 19:20 ` Ville Syrjälä
2016-10-27 19:20 ` Ville Syrjälä
2016-10-27 19:25 ` Thomas Gleixner
2016-10-27 19:25 ` Thomas Gleixner
2016-10-27 20:37 ` Ville Syrjälä
2016-10-27 20:37 ` Ville Syrjälä
2016-10-27 20:41 ` Thomas Gleixner
2016-10-27 20:41 ` Thomas Gleixner
2016-10-28 15:56 ` Ville Syrjälä [this message]
2016-10-28 15:56 ` Ville Syrjälä
2016-10-28 18:58 ` Thomas Gleixner
2016-10-28 18:58 ` Thomas Gleixner
2016-11-01 20:47 ` Ville Syrjälä
2016-11-01 20:47 ` Ville Syrjälä
2016-11-07 11:49 ` Ville Syrjälä
2016-11-07 11:49 ` Ville Syrjälä
2016-11-07 13:07 ` Thomas Gleixner
2016-11-07 13:07 ` Thomas Gleixner
2016-11-07 16:45 ` Ville Syrjälä
2016-11-07 16:45 ` Ville Syrjälä
2016-11-09 3:54 ` Feng Tang
2016-11-09 3:54 ` Feng Tang
2016-11-09 6:08 ` Linus Torvalds
2016-11-09 6:08 ` Linus Torvalds
2016-11-17 17:14 ` Ville Syrjälä
2016-11-17 17:14 ` Ville Syrjälä
2016-05-11 13:36 ` Rafael J. Wysocki
2016-05-11 15:25 ` Jim Bos
2016-05-11 16:19 ` Rafael J. Wysocki
2016-05-11 16:19 ` Rafael J. Wysocki
2016-05-11 16:21 ` Sebastian Andrzej Siewior
2016-05-11 16:24 ` Rafael J. Wysocki
2016-05-11 12:44 ` Arjan van de Ven
2016-05-11 15:26 ` Arjan van de Ven
2016-05-11 15:26 ` Arjan van de Ven
2016-05-11 17:09 ` Ville Syrjälä
2016-05-11 17:09 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161028155603.GI4617@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=arjan@linux.intel.com \
--cc=bigeasy@linutronix.de \
--cc=feng.79.tang@gmail.com \
--cc=feng.tang@intel.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oleg@redhat.com \
--cc=paulmck@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=pjt@google.com \
--cc=rafael.j.wysocki@intel.com \
--cc=rafael@kernel.org \
--cc=riel@redhat.com \
--cc=rostedt@goodmis.org \
--cc=rui.zhang@intel \
--cc=rusty@rustcorp.com.au \
--cc=srivatsa@mit.edu \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).