From: Peter Zijlstra <peterz@infradead.org>
To: will.deacon@arm.com, aneesh.kumar@linux.vnet.ibm.com,
akpm@linux-foundation.org, npiggin@gmail.com
Cc: linux-arch@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, peterz@infradead.org,
linux@armlinux.org.uk, heiko.carstens@de.ibm.com
Subject: [RFC][PATCH 05/11] asm-generic/tlb: Provide generic tlb_flush
Date: Thu, 13 Sep 2018 11:21:15 +0200 [thread overview]
Message-ID: <20180913092812.132208484@infradead.org> (raw)
In-Reply-To: 20180913092110.817204997@infradead.org
Provide a generic tlb_flush() implementation that relies on
flush_tlb_range(). This is a little awkward because flush_tlb_range()
assumes a VMA for range invalidation, but we no longer have one.
Audit of all flush_tlb_range() implementations shows only vma->vm_mm
and vma->vm_flags are used, and of the latter only VM_EXEC (I-TLB
invalidates) and VM_HUGETLB (large TLB invalidate) are used.
Therefore, track VM_EXEC and VM_HUGETLB in two more bits, and create a
'fake' VMA.
This allows architectures that have a reasonably efficient
flush_tlb_range() to not require any additional effort.
Cc: Will Deacon <will.deacon@arm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
arch/arm64/include/asm/tlb.h | 1
arch/powerpc/include/asm/tlb.h | 1
arch/riscv/include/asm/tlb.h | 1
arch/x86/include/asm/tlb.h | 1
include/asm-generic/tlb.h | 80 +++++++++++++++++++++++++++++++++++------
5 files changed, 74 insertions(+), 10 deletions(-)
--- a/arch/arm64/include/asm/tlb.h
+++ b/arch/arm64/include/asm/tlb.h
@@ -27,6 +27,7 @@ static inline void __tlb_remove_table(vo
free_page_and_swap_cache((struct page *)_table);
}
+#define tlb_flush tlb_flush
static void tlb_flush(struct mmu_gather *tlb);
#include <asm-generic/tlb.h>
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -28,6 +28,7 @@
#define tlb_end_vma(tlb, vma) do { } while (0)
#define __tlb_remove_tlb_entry __tlb_remove_tlb_entry
+#define tlb_flush tlb_flush
extern void tlb_flush(struct mmu_gather *tlb);
/* Get the generic bits... */
--- a/arch/riscv/include/asm/tlb.h
+++ b/arch/riscv/include/asm/tlb.h
@@ -18,6 +18,7 @@ struct mmu_gather;
static void tlb_flush(struct mmu_gather *tlb);
+#define tlb_flush tlb_flush
#include <asm-generic/tlb.h>
static inline void tlb_flush(struct mmu_gather *tlb)
--- a/arch/x86/include/asm/tlb.h
+++ b/arch/x86/include/asm/tlb.h
@@ -6,6 +6,7 @@
#define tlb_end_vma(tlb, vma) do { } while (0)
#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+#define tlb_flush tlb_flush
static inline void tlb_flush(struct mmu_gather *tlb);
#include <asm-generic/tlb.h>
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -241,6 +241,12 @@ struct mmu_gather {
unsigned int cleared_puds : 1;
unsigned int cleared_p4ds : 1;
+ /*
+ * tracks VM_EXEC | VM_HUGETLB in tlb_start_vma
+ */
+ unsigned int vma_exec : 1;
+ unsigned int vma_huge : 1;
+
unsigned int batch_count;
struct mmu_gather_batch *active;
@@ -282,7 +288,35 @@ static inline void __tlb_reset_range(str
tlb->cleared_pmds = 0;
tlb->cleared_puds = 0;
tlb->cleared_p4ds = 0;
+ /*
+ * Do not reset mmu_gather::vma_* fields here, we do not
+ * call into tlb_start_vma() again to set them if there is an
+ * intermediate flush.
+ */
+}
+
+#ifndef tlb_flush
+
+#if defined(tlb_start_vma) || defined(tlb_end_vma)
+#error Default tlb_flush() relies on default tlb_start_vma() and tlb_end_vma()
+#endif
+
+#define tlb_flush tlb_flush
+static inline void tlb_flush(struct mmu_gather *tlb)
+{
+ if (tlb->fullmm || tlb->need_flush_all) {
+ flush_tlb_mm(tlb->mm);
+ } else {
+ struct vm_area_struct vma = {
+ .vm_mm = tlb->mm,
+ .vm_flags = tlb->vma_exec ? VM_EXEC : 0 |
+ tlb->vma_huge ? VM_HUGETLB : 0,
+ };
+
+ flush_tlb_range(&vma, tlb->start, tlb->end);
+ }
}
+#endif
static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
{
@@ -353,19 +387,45 @@ static inline unsigned long tlb_get_unma
* the vmas are adjusted to only cover the region to be torn down.
*/
#ifndef tlb_start_vma
-#define tlb_start_vma(tlb, vma) \
-do { \
- if (!tlb->fullmm) \
- flush_cache_range(vma, vma->vm_start, vma->vm_end); \
-} while (0)
+#define tlb_start_vma tlb_start_vma
+static inline void tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+ if (tlb->fullmm)
+ return;
+
+ /*
+ * flush_tlb_range() implementations that look at VM_HUGETLB (tile,
+ * mips-4k) flush only large pages.
+ *
+ * flush_tlb_range() implementations that flush I-TLB also flush D-TLB
+ * (tile, xtensa, arm), so it's ok to just add VM_EXEC to an existing
+ * range.
+ *
+ * We rely on tlb_end_vma() to issue a flush, such that when we reset
+ * these values the batch is empty.
+ */
+ tlb->vma_huge = !!(vma->vm_flags & VM_HUGETLB);
+ tlb->vma_exec = !!(vma->vm_flags & VM_EXEC);
+
+ flush_cache_range(vma, vma->vm_start, vma->vm_end);
+}
#endif
#ifndef tlb_end_vma
-#define tlb_end_vma(tlb, vma) \
-do { \
- if (!tlb->fullmm) \
- tlb_flush_mmu_tlbonly(tlb); \
-} while (0)
+#define tlb_end_vma tlb_end_vma
+static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+ if (tlb->fullmm)
+ return;
+
+ /*
+ * Do a TLB flush and reset the range at VMA boundaries; this avoids
+ * the ranges growing with the unused space between consecutive VMAs,
+ * but also the mmu_gather::vma_* flags from tlb_start_vma() rely on
+ * this.
+ */
+ tlb_flush_mmu_tlbonly(tlb);
+}
#endif
#ifndef __tlb_remove_tlb_entry
next prev parent reply other threads:[~2018-09-13 9:21 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 9:21 [RFC][PATCH 00/11] my generic mmu_gather patches Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
2018-09-13 9:21 ` [RFC][PATCH 01/11] asm-generic/tlb: Provide a comment Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
2018-09-13 10:30 ` Martin Schwidefsky
2018-09-13 10:30 ` Martin Schwidefsky
2018-09-13 10:57 ` Peter Zijlstra
2018-09-13 10:57 ` Peter Zijlstra
2018-09-13 12:18 ` Martin Schwidefsky
2018-09-13 12:18 ` Martin Schwidefsky
2018-09-13 12:39 ` Peter Zijlstra
2018-09-13 12:39 ` Peter Zijlstra
2018-09-14 10:28 ` Martin Schwidefsky
2018-09-14 10:28 ` Martin Schwidefsky
2018-09-14 13:02 ` Peter Zijlstra
2018-09-14 13:02 ` Peter Zijlstra
2018-09-14 14:07 ` Martin Schwidefsky
2018-09-14 14:07 ` Martin Schwidefsky
2018-09-14 16:48 ` Will Deacon
2018-09-14 16:48 ` Will Deacon
2018-09-19 11:33 ` Peter Zijlstra
2018-09-19 11:33 ` Peter Zijlstra
2018-09-19 11:51 ` Peter Zijlstra
2018-09-19 11:51 ` Peter Zijlstra
2018-09-19 12:23 ` Will Deacon
2018-09-19 12:23 ` Will Deacon
2018-09-19 13:12 ` Peter Zijlstra
2018-09-19 13:12 ` Peter Zijlstra
2018-09-13 9:21 ` [RFC][PATCH 02/11] asm-generic/tlb: Provide HAVE_MMU_GATHER_PAGE_SIZE Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
2018-09-14 16:56 ` Will Deacon
2018-09-14 16:56 ` Will Deacon
2018-09-13 9:21 ` [RFC][PATCH 03/11] x86/mm: Page size aware flush_tlb_mm_range() Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
2018-09-13 17:22 ` Dave Hansen
2018-09-13 17:22 ` Dave Hansen
2018-09-13 18:42 ` Peter Zijlstra
2018-09-13 18:42 ` Peter Zijlstra
2018-09-13 18:46 ` Peter Zijlstra
2018-09-13 18:46 ` Peter Zijlstra
2018-09-13 18:48 ` Peter Zijlstra
2018-09-13 18:48 ` Peter Zijlstra
2018-09-13 18:49 ` Dave Hansen
2018-09-13 18:49 ` Dave Hansen
2018-09-13 18:47 ` Dave Hansen
2018-09-13 18:47 ` Dave Hansen
2018-09-13 9:21 ` [RFC][PATCH 04/11] asm-generic/tlb: Provide generic VIPT cache flush Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
2018-09-14 16:56 ` Will Deacon
2018-09-14 16:56 ` Will Deacon
2018-09-13 9:21 ` Peter Zijlstra [this message]
2018-09-13 9:21 ` [RFC][PATCH 05/11] asm-generic/tlb: Provide generic tlb_flush Peter Zijlstra
2018-09-13 13:09 ` Jann Horn
2018-09-13 13:09 ` Jann Horn
2018-09-13 14:06 ` Peter Zijlstra
2018-09-13 14:06 ` Peter Zijlstra
2018-09-13 9:21 ` [RFC][PATCH 06/11] asm-generic/tlb: Conditionally provide tlb_migrate_finish() Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
2018-09-14 16:57 ` Will Deacon
2018-09-14 16:57 ` Will Deacon
2018-09-13 9:21 ` [RFC][PATCH 07/11] arm/tlb: Convert to generic mmu_gather Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
2018-09-18 14:10 ` Will Deacon
2018-09-18 14:10 ` Will Deacon
2018-09-19 11:28 ` Peter Zijlstra
2018-09-19 11:28 ` Peter Zijlstra
2018-09-19 12:24 ` Will Deacon
2018-09-19 12:24 ` Will Deacon
2018-09-19 11:30 ` Peter Zijlstra
2018-09-19 11:30 ` Peter Zijlstra
2018-09-13 9:21 ` [RFC][PATCH 08/11] ia64/tlb: Conver " Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
2018-09-13 9:21 ` [RFC][PATCH 09/11] sh/tlb: Convert SH " Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
2018-09-13 9:21 ` [RFC][PATCH 10/11] um/tlb: Convert " Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
2018-09-13 9:21 ` [RFC][PATCH 11/11] arch/tlb: Clean up simple architectures Peter Zijlstra
2018-09-13 9:21 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180913092812.132208484@infradead.org \
--to=peterz@infradead.org \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux@armlinux.org.uk \
--cc=npiggin@gmail.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).