From: Jens Axboe <axboe@kernel.dk>
To: linux-fsdevel@vger.kernel.org, linux-aio@kvack.org,
linux-block@vger.kernel.org, linux-arch@vger.kernel.org
Cc: hch@lst.de, jmoyer@redhat.com, avi@scylladb.com,
Jens Axboe <axboe@kernel.dk>
Subject: [PATCH 15/15] io_uring: add io_uring_event cache hit information
Date: Wed, 9 Jan 2019 19:44:04 -0700 [thread overview]
Message-ID: <20190110024404.25372-16-axboe@kernel.dk> (raw)
In-Reply-To: <20190110024404.25372-1-axboe@kernel.dk>
Add hint on whether a read was served out of the page cache, or if it
hit media. This is useful for buffered async IO, O_DIRECT reads would
never have this set (for obvious reasons).
If the read hit page cache, cqe->flags will have IOCQE_FLAG_CACHEHIT
set.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
---
fs/io_uring.c | 7 ++++++-
include/uapi/linux/io_uring.h | 5 +++++
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 6c62329b00ec..f2a603c447ba 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -511,11 +511,16 @@ static void io_fill_cq_error(struct io_ring_ctx *ctx, struct sqe_submit *s,
static void io_complete_scqring_rw(struct kiocb *kiocb, long res, long res2)
{
struct io_kiocb *iocb = container_of(kiocb, struct io_kiocb, rw);
+ unsigned ev_flags = 0;
kiocb_end_write(kiocb);
fput(kiocb->ki_filp);
- io_cqring_fill_event(iocb->ki_ctx, iocb->ki_index, res, 0);
+
+ if (res > 0 && test_bit(KIOCB_F_FORCE_NONBLOCK, &iocb->ki_flags))
+ ev_flags = IOCQE_FLAG_CACHEHIT;
+
+ io_cqring_fill_event(iocb->ki_ctx, iocb->ki_index, res, ev_flags);
io_free_kiocb(iocb);
}
diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h
index 9321eb97479d..20e4c22e040d 100644
--- a/include/uapi/linux/io_uring.h
+++ b/include/uapi/linux/io_uring.h
@@ -55,6 +55,11 @@ struct io_uring_cqe {
__u32 flags;
};
+/*
+ * io_uring_event->flags
+ */
+#define IOCQE_FLAG_CACHEHIT (1 << 0) /* IO did not hit media */
+
/*
* Magic offsets for the application to mmap the data it needs
*/
--
2.17.1
--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org. For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>
WARNING: multiple messages have this Message-ID (diff)
From: Jens Axboe <axboe@kernel.dk>
To: linux-fsdevel@vger.kernel.org, linux-aio@kvack.org,
linux-block@vger.kernel.org, linux-arch@vger.kernel.org
Cc: hch@lst.de, jmoyer@redhat.com, avi@scylladb.com,
Jens Axboe <axboe@kernel.dk>
Subject: [PATCH 15/15] io_uring: add io_uring_event cache hit information
Date: Wed, 9 Jan 2019 19:44:04 -0700 [thread overview]
Message-ID: <20190110024404.25372-16-axboe@kernel.dk> (raw)
Message-ID: <20190110024404.Qq2nOpn8TfLH3jZa_JnjcyCCJsWQ9oDofZdcE--WIQE@z> (raw)
In-Reply-To: <20190110024404.25372-1-axboe@kernel.dk>
Add hint on whether a read was served out of the page cache, or if it
hit media. This is useful for buffered async IO, O_DIRECT reads would
never have this set (for obvious reasons).
If the read hit page cache, cqe->flags will have IOCQE_FLAG_CACHEHIT
set.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
---
fs/io_uring.c | 7 ++++++-
include/uapi/linux/io_uring.h | 5 +++++
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 6c62329b00ec..f2a603c447ba 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -511,11 +511,16 @@ static void io_fill_cq_error(struct io_ring_ctx *ctx, struct sqe_submit *s,
static void io_complete_scqring_rw(struct kiocb *kiocb, long res, long res2)
{
struct io_kiocb *iocb = container_of(kiocb, struct io_kiocb, rw);
+ unsigned ev_flags = 0;
kiocb_end_write(kiocb);
fput(kiocb->ki_filp);
- io_cqring_fill_event(iocb->ki_ctx, iocb->ki_index, res, 0);
+
+ if (res > 0 && test_bit(KIOCB_F_FORCE_NONBLOCK, &iocb->ki_flags))
+ ev_flags = IOCQE_FLAG_CACHEHIT;
+
+ io_cqring_fill_event(iocb->ki_ctx, iocb->ki_index, res, ev_flags);
io_free_kiocb(iocb);
}
diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h
index 9321eb97479d..20e4c22e040d 100644
--- a/include/uapi/linux/io_uring.h
+++ b/include/uapi/linux/io_uring.h
@@ -55,6 +55,11 @@ struct io_uring_cqe {
__u32 flags;
};
+/*
+ * io_uring_event->flags
+ */
+#define IOCQE_FLAG_CACHEHIT (1 << 0) /* IO did not hit media */
+
/*
* Magic offsets for the application to mmap the data it needs
*/
--
2.17.1
next prev parent reply other threads:[~2019-01-10 2:44 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-10 2:43 [PATCHSET v2] io_uring IO interface Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-10 2:43 ` [PATCH 01/15] fs: add an iopoll method to struct file_operations Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-10 2:43 ` [PATCH 02/15] block: wire up block device iopoll method Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-10 2:43 ` [PATCH 03/15] block: add bio_set_polled() helper Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-10 2:43 ` [PATCH 04/15] iomap: wire up the iopoll method Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-10 2:43 ` [PATCH 05/15] Add io_uring IO interface Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-11 18:19 ` Martin K. Petersen
2019-01-11 18:19 ` Martin K. Petersen
2019-01-11 18:34 ` Jens Axboe
2019-01-11 18:34 ` Jens Axboe
2019-01-13 16:22 ` Jens Axboe
2019-01-13 16:22 ` Jens Axboe
2019-01-15 17:31 ` Martin K. Petersen
2019-01-15 17:31 ` Martin K. Petersen
2019-01-10 2:43 ` [PATCH 06/15] io_uring: support for IO polling Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-10 2:43 ` [PATCH 07/15] io_uring: add submission side request cache Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-10 2:43 ` [PATCH 08/15] fs: add fget_many() and fput_many() Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-10 2:43 ` [PATCH 09/15] io_uring: use fget/fput_many() for file references Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-10 2:43 ` [PATCH 10/15] io_uring: batch io_kiocb allocation Jens Axboe
2019-01-10 2:43 ` Jens Axboe
2019-01-10 2:44 ` [PATCH 11/15] block: implement bio helper to add iter bvec pages to bio Jens Axboe
2019-01-10 2:44 ` Jens Axboe
2019-01-10 2:44 ` [PATCH 12/15] io_uring: add support for pre-mapped user IO buffers Jens Axboe
2019-01-10 2:44 ` Jens Axboe
2019-01-10 2:44 ` [PATCH 13/15] io_uring: support kernel side submission Jens Axboe
2019-01-10 2:44 ` Jens Axboe
2019-01-10 2:44 ` [PATCH 14/15] io_uring: add submission polling Jens Axboe
2019-01-10 2:44 ` Jens Axboe
2019-01-10 2:44 ` Jens Axboe [this message]
2019-01-10 2:44 ` [PATCH 15/15] io_uring: add io_uring_event cache hit information Jens Axboe
2019-01-10 23:12 ` Jeff Moyer
2019-01-10 23:12 ` Jeff Moyer
2019-01-10 23:47 ` Jens Axboe
2019-01-10 23:47 ` Jens Axboe
2019-01-11 9:46 ` [PATCHSET v2] io_uring IO interface Roman Penyaev
2019-01-11 9:46 ` Roman Penyaev
2019-01-11 16:11 ` Ilya Dryomov
2019-01-11 16:11 ` Ilya Dryomov
2019-01-11 16:21 ` Christoph Hellwig
2019-01-11 16:21 ` Christoph Hellwig
2019-01-11 16:39 ` Roman Penyaev
2019-01-11 16:39 ` Roman Penyaev
2019-01-11 18:05 ` Jens Axboe
2019-01-11 18:05 ` Jens Axboe
-- strict thread matches above, loose matches on Subject: below --
2019-01-16 17:49 [PATCHSET v5] " Jens Axboe
2019-01-16 17:50 ` [PATCH 15/15] io_uring: add io_uring_event cache hit information Jens Axboe
2019-01-16 17:50 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190110024404.25372-16-axboe@kernel.dk \
--to=axboe@kernel.dk \
--cc=avi@scylladb.com \
--cc=hch@lst.de \
--cc=jmoyer@redhat.com \
--cc=linux-aio@kvack.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).