* [PATCH 2/2] scripts: factor out the common installation code into scripts/install.sh
2022-04-30 12:16 [PATCH 1/2] ia64: make the install target not depend on any build artifact Masahiro Yamada
@ 2022-04-30 12:16 ` Masahiro Yamada
0 siblings, 0 replies; 2+ messages in thread
From: Masahiro Yamada @ 2022-04-30 12:16 UTC (permalink / raw)
To: linux-kbuild; +Cc: linux-arch, linux-kernel, Masahiro Yamada
Many architectures has a similar install.sh script.
The first half is really generic; verifies that the kernel image and
System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.
The second half is kind of arch-specific. It just copies the kernel image
and System.map to the destination, but the code is slightly different.
This patch factors out the generic part into scripts/install.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
Makefile | 10 ++++++++-
arch/arm/Makefile | 4 ++--
arch/arm/boot/install.sh | 21 ------------------
arch/arm64/Makefile | 6 ++----
arch/arm64/boot/install.sh | 21 ------------------
arch/ia64/Makefile | 3 ++-
arch/ia64/install.sh | 10 ---------
arch/m68k/Makefile | 3 ++-
arch/m68k/install.sh | 22 -------------------
arch/nios2/Makefile | 3 +--
arch/nios2/boot/install.sh | 22 -------------------
arch/parisc/Makefile | 11 +++++-----
arch/parisc/install.sh | 28 ------------------------
arch/powerpc/Makefile | 4 ++--
arch/powerpc/boot/install.sh | 23 --------------------
arch/riscv/Makefile | 7 +++---
arch/riscv/boot/install.sh | 21 ------------------
arch/s390/Makefile | 3 +--
arch/s390/boot/install.sh | 5 -----
arch/sparc/Makefile | 3 +--
arch/sparc/boot/install.sh | 22 -------------------
arch/x86/Makefile | 3 +--
arch/x86/boot/install.sh | 22 -------------------
scripts/install.sh | 41 ++++++++++++++++++++++++++++++++++++
24 files changed, 72 insertions(+), 246 deletions(-)
mode change 100644 => 100755 arch/arm/boot/install.sh
mode change 100644 => 100755 arch/arm64/boot/install.sh
mode change 100644 => 100755 arch/ia64/install.sh
mode change 100644 => 100755 arch/m68k/install.sh
mode change 100644 => 100755 arch/nios2/boot/install.sh
mode change 100644 => 100755 arch/parisc/install.sh
mode change 100644 => 100755 arch/powerpc/boot/install.sh
mode change 100644 => 100755 arch/riscv/boot/install.sh
mode change 100644 => 100755 arch/s390/boot/install.sh
mode change 100644 => 100755 arch/sparc/boot/install.sh
mode change 100644 => 100755 arch/x86/boot/install.sh
create mode 100755 scripts/install.sh
diff --git a/Makefile b/Makefile
index 9a60f732bb3c..7a82bbc505f8 100644
--- a/Makefile
+++ b/Makefile
@@ -1293,12 +1293,20 @@ scripts_unifdef: scripts_basic
# ---------------------------------------------------------------------------
# Install
+# Install $(KBUILD_IMAGE) by default.
+# If necessary, override install-image per target.
+install-image = $(KBUILD_IMAGE)
+
# Many distributions have the custom install script, /sbin/installkernel.
# If DKMS is installed, 'make install' will eventually recurse back
# to this Makefile to build and install external modules.
# Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
-install: sub_make_done :=
+quiet_cmd_install = INSTALL $(INSTALL_PATH)
+ cmd_install = \
+ unset sub_make_done; \
+ $(srctree)/scripts/install.sh $(KERNELRELEASE) $(install-image) \
+ System.map "$(INSTALL_PATH)"
# ---------------------------------------------------------------------------
# Tools
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a2391b8de5a5..5be38ee44288 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -318,9 +318,9 @@ $(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
@$(kecho) ' Kernel: $(boot)/$@ is ready'
+$(INSTALL_TARGETS): install-image = $(boot)/$(patsubst %install,%Image,$@)
$(INSTALL_TARGETS):
- $(CONFIG_SHELL) $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" \
- $(boot)/$(patsubst %install,%Image,$@) System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
PHONY += vdso_install
vdso_install:
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
old mode 100644
new mode 100755
index 2a45092a40e3..9ec11fac7d8d
--- a/arch/arm/boot/install.sh
+++ b/arch/arm/boot/install.sh
@@ -1,7 +1,5 @@
#!/bin/sh
#
-# arch/arm/boot/install.sh
-#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -18,25 +16,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
if [ "$(basename $2)" = "zImage" ]; then
# Compressed install
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 2f1de88651e6..3a1157d48780 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -162,11 +162,9 @@ Image: vmlinux
Image.%: Image
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-install: install-image := Image
-zinstall: install-image := Image.gz
+install: install-image := $(boot)/Image
install zinstall:
- $(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
- $(boot)/$(install-image) System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
PHONY += vdso_install
vdso_install:
diff --git a/arch/arm64/boot/install.sh b/arch/arm64/boot/install.sh
old mode 100644
new mode 100755
index d91e1f022573..7399d706967a
--- a/arch/arm64/boot/install.sh
+++ b/arch/arm64/boot/install.sh
@@ -1,7 +1,5 @@
#!/bin/sh
#
-# arch/arm64/boot/install.sh
-#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -18,25 +16,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
if [ "$(basename $2)" = "Image.gz" ]; then
# Compressed install
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 6c4bfa54b703..956e46ce3820 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -72,8 +72,9 @@ archheaders:
CLEAN_FILES += vmlinux.gz
+install: install-image := vmlinux.gz
install:
- sh $(srctree)/arch/ia64/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
define archhelp
echo '* compressed - Build compressed kernel image'
diff --git a/arch/ia64/install.sh b/arch/ia64/install.sh
old mode 100644
new mode 100755
index 0e932f5dcd1a..2d4b66a9f362
--- a/arch/ia64/install.sh
+++ b/arch/ia64/install.sh
@@ -1,7 +1,5 @@
#!/bin/sh
#
-# arch/ia64/install.sh
-#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -17,14 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
if [ -f $4/vmlinuz ]; then
mv $4/vmlinuz $4/vmlinuz.old
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 740fc97b9c0f..4878e82ea1ba 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -138,5 +138,6 @@ CLEAN_FILES += vmlinux.gz vmlinux.bz2
archheaders:
$(Q)$(MAKE) $(build)=arch/m68k/kernel/syscalls all
+install: install-image := vmlinux.gz
install:
- sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
diff --git a/arch/m68k/install.sh b/arch/m68k/install.sh
old mode 100644
new mode 100755
index 57d640d4382c..af65e16e5147
--- a/arch/m68k/install.sh
+++ b/arch/m68k/install.sh
@@ -15,28 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
if [ -f $4/vmlinuz ]; then
mv $4/vmlinuz $4/vmlinuz.old
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
index 02d678559066..d6a7499b814c 100644
--- a/arch/nios2/Makefile
+++ b/arch/nios2/Makefile
@@ -56,8 +56,7 @@ $(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
install:
- sh $(srctree)/$(nios2-boot)/install.sh $(KERNELRELEASE) \
- $(KBUILD_IMAGE) System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
define archhelp
echo '* vmImage - Kernel-only image for U-Boot ($(KBUILD_IMAGE))'
diff --git a/arch/nios2/boot/install.sh b/arch/nios2/boot/install.sh
old mode 100644
new mode 100755
index 3cb3f468bc51..34a2feec42c8
--- a/arch/nios2/boot/install.sh
+++ b/arch/nios2/boot/install.sh
@@ -15,28 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
if [ -f $4/vmlinuz ]; then
mv $4/vmlinuz $4/vmlinuz.old
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 7583fc39ab2d..f4efcd709df4 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -184,12 +184,11 @@ vdso_install:
$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso $@
$(if $(CONFIG_COMPAT_VDSO), \
$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 $@)
-install:
- $(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
- $(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
-zinstall:
- $(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
- $(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
+
+install: install-image := vmlinux
+zinstall: install-image := vmlinuz
+install zinstall:
+ $(call cmd,install)
CLEAN_FILES += lifimage
MRPROPER_FILES += palo.conf
diff --git a/arch/parisc/install.sh b/arch/parisc/install.sh
old mode 100644
new mode 100755
index 70d3cffb0251..933d031c249a
--- a/arch/parisc/install.sh
+++ b/arch/parisc/install.sh
@@ -1,7 +1,5 @@
#!/bin/sh
#
-# arch/parisc/install.sh, derived from arch/i386/boot/install.sh
-#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -17,32 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -n "${INSTALLKERNEL}" ]; then
- if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
- if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
- if [ -x /usr/sbin/${INSTALLKERNEL} ]; then exec /usr/sbin/${INSTALLKERNEL} "$@"; fi
-fi
-
-# Default install
if [ "$(basename $2)" = "vmlinuz" ]; then
# Compressed install
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index eb541e730d3c..83f367738954 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -407,9 +407,9 @@ define archhelp
endef
PHONY += install
+install: install-image := vmlinux
install:
- sh -x $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" vmlinux \
- System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
ifeq ($(KBUILD_EXTMOD),)
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
old mode 100644
new mode 100755
index 14473150ddb4..461902c8a46d
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -15,32 +15,9 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-# Bail with error code if anything goes wrong
set -e
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install
-
# this should work for both the pSeries zImage and the iSeries vmlinux.sm
image_name=`basename $2`
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 7d81102cffd4..e292a632f02e 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -139,11 +139,10 @@ $(BOOT_TARGETS): vmlinux
Image.%: Image
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-install: install-image = Image
-zinstall: install-image = Image.gz
+install: install-image = $(boot)/Image
+zinstall: install-image = $(boot)/Image.gz
install zinstall:
- $(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
- $(boot)/$(install-image) System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
PHONY += rv32_randconfig
rv32_randconfig:
diff --git a/arch/riscv/boot/install.sh b/arch/riscv/boot/install.sh
old mode 100644
new mode 100755
index 18c39159c0ff..4c63f3f0643d
--- a/arch/riscv/boot/install.sh
+++ b/arch/riscv/boot/install.sh
@@ -1,7 +1,5 @@
#!/bin/sh
#
-# arch/riscv/boot/install.sh
-#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -18,25 +16,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
if [ "$(basename $2)" = "Image.gz" ]; then
# Compressed install
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 7a65bca1e5af..cc2425539ef0 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -128,8 +128,7 @@ all: bzImage
KBUILD_IMAGE := $(boot)/bzImage
install:
- sh -x $(srctree)/$(boot)/install.sh $(KERNELRELEASE) $(KBUILD_IMAGE) \
- System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
bzImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
diff --git a/arch/s390/boot/install.sh b/arch/s390/boot/install.sh
old mode 100644
new mode 100755
index 515b27a996b3..f3c001a095b2
--- a/arch/s390/boot/install.sh
+++ b/arch/s390/boot/install.sh
@@ -16,11 +16,6 @@
# $4 - default install path (blank if root directory)
#
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
echo "Warning: '${INSTALLKERNEL}' command not available - additional " \
"bootloader config required" >&2
if [ -f $4/vmlinuz-$1 ]; then mv $4/vmlinuz-$1 $4/vmlinuz-$1.old; fi
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index c7008bbebc4c..fe58a410b4ce 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -72,8 +72,7 @@ image zImage uImage tftpboot.img vmlinux.aout: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
install:
- sh $(srctree)/$(boot)/install.sh $(KERNELRELEASE) $(KBUILD_IMAGE) \
- System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
archheaders:
$(Q)$(MAKE) $(build)=arch/sparc/kernel/syscalls all
diff --git a/arch/sparc/boot/install.sh b/arch/sparc/boot/install.sh
old mode 100644
new mode 100755
index b32851eae693..4f130f3f30d6
--- a/arch/sparc/boot/install.sh
+++ b/arch/sparc/boot/install.sh
@@ -15,28 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
if [ -f $4/vmlinuz ]; then
mv $4/vmlinuz $4/vmlinuz.old
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 63d50f65b828..5e1f21aae12b 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -271,8 +271,7 @@ $(BOOT_TARGETS): vmlinux
PHONY += install
install:
- $(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
- $(KBUILD_IMAGE) System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
PHONY += vdso_install
vdso_install:
diff --git a/arch/x86/boot/install.sh b/arch/x86/boot/install.sh
old mode 100644
new mode 100755
index d13ec1c38640..0849f4b42745
--- a/arch/x86/boot/install.sh
+++ b/arch/x86/boot/install.sh
@@ -15,28 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
if [ -f $4/vmlinuz ]; then
mv $4/vmlinuz $4/vmlinuz.old
diff --git a/scripts/install.sh b/scripts/install.sh
new file mode 100755
index 000000000000..634a86423600
--- /dev/null
+++ b/scripts/install.sh
@@ -0,0 +1,41 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Common code factored out by Masahiro Yamada
+#
+# Arguments:
+# $1 - kernel version
+# $2 - kernel image file
+# $3 - kernel map file
+# $4 - default install path (blank if root directory)
+
+set -e
+
+# Make sure the files actually exist
+for file in "$2" "$3"
+do
+ if [ ! -f "$file" ]; then
+ echo >&2
+ echo >&2 " *** Missing file: $file"
+ echo >&2 ' *** You need to run "make" before "make install".'
+ echo >&2
+ exit 1
+ fi
+done
+
+# User/arch may have a custom install script
+for file in "${HOME}/bin/${INSTALLKERNEL}" \
+ "/sbin/${INSTALLKERNEL}" \
+ "${srctree}/arch/${SRCARCH}/install.sh" \
+ "${srctree}/arch/${SRCARCH}/boot/install.sh"
+do
+ if [ -x "${file}" ]; then
+ exec "${file}" "$@"
+ fi
+done
+
+echo "No install script found" >&2
+exit 1
--
2.32.0
^ permalink raw reply related [flat|nested] 2+ messages in thread