Re: [PATCH V9 20/20] riscv: compat: Add COMPAT Kbuild skeletal support

[Guenter Roeck <linux@roeck-us.net>]

On Tue, May 24, 2022 at 12:40:06AM +0200, Heiko Stübner wrote:
> Hi Guenter,
> 
> Am Montag, 23. Mai 2022, 18:18:47 CEST schrieb Guenter Roeck:
> > On 5/23/22 08:18, Guo Ren wrote:
> > > I tested Palmer's branch, it's okay:
> > > 8810d7feee5a (HEAD -> for-next, palmer/for-next) riscv: Don't output a
> > > bogus mmu-type on a no MMU kernel
> > > 
> > > I also tested linux-next, it's okay:
> > > 
> > > rv64_rootfs:
> > > # uname -a
> > > Linux buildroot 5.18.0-next-20220523 #7 SMP Mon May 23 11:15:17 EDT
> > > 2022 riscv64 GNU/Linux
> > > #
> > 
> > That is is ok with one setup doesn't mean it is ok with
> > all setups. It is not ok with my root file system (from
> > https://github.com/groeck/linux-build-test/tree/master/rootfs/riscv64),
> > with qemu v6.2.
> 
> That is very true that it shouldn't fail on any existing (qemu-)platform,
> but as I remember also testing Guo's series on both riscv32 and riscv64
> qemu platforms in the past, I guess it would be really helpful to get more
> information about the failing platform you're experiencing so that we can
> find the source of the issue.
> 
> As it looks like you both tested the same kernel source, I guess the only
> differences could be in the qemu-version, kernel config and rootfs.
> Is your rootfs something you can share or that can be rebuilt easily?
> 
I provided a link to my root file system above. The link points to two
root file systems, for initrd (cpio archive) and for ext2.
I also mentioned above that I used qemu v6.2. And below I said

> My root file system uses musl.

I attached the buildroot configuration below. The buildroot version,
if I remember correctly, was 2021.02.

Kernel configuration is basically defconfig. However, I do see one
detail that is possibly special in my configuration.

    # The latest kernel assumes SBI version 0.3, but that doesn't match qemu
    # at least up to version 6.2 and results in hangup/crashes during reboot
    # with sifive_u emulations.
    enable_config "${defconfig}" CONFIG_RISCV_SBI_V01

Hope that helps,

Guenter

---
BR2_riscv=y
BR2_TOOLCHAIN_BUILDROOT_MUSL=y
BR2_KERNEL_HEADERS_4_19=y
BR2_BINUTILS_VERSION_2_32_X=y
BR2_TARGET_RUN_TESTSCRIPT=y
BR2_SHUTDOWN_COMMAND_POWEROFF=y
BR2_SYSTEM_DHCP="eth0"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_STRACE=y
BR2_PACKAGE_I2C_TOOLS=y
BR2_PACKAGE_PCIUTILS=y
BR2_PACKAGE_DTC=y
BR2_PACKAGE_DTC_PROGRAMS=y
BR2_PACKAGE_IPROUTE2=y
BR2_TARGET_ROOTFS_BTRFS=y
BR2_TARGET_ROOTFS_CPIO=y
BR2_TARGET_ROOTFS_CPIO_GZIP=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_SIZE="16M"
BR2_TARGET_ROOTFS_EXT2_GZIP=y
BR2_TARGET_ROOTFS_ISO_GZIP=y
BR2_TARGET_ROOTFS_SQUASHFS=y
# BR2_TARGET_ROOTFS_TAR is not set