From: Niklas Schnelle <schnelle@linux.ibm.com>
To: Arnd Bergmann <arnd@arndb.de>, Ian Abbott <abbotti@mev.co.uk>,
H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Alan Stern" <stern@rowland.harvard.edu>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Geert Uytterhoeven" <geert@linux-m68k.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
linux-pci@vger.kernel.org, "Arnd Bergmann" <arnd@kernel.org>
Subject: [PATCH v3 04/38] comedi: add HAS_IOPORT dependencies
Date: Tue, 14 Mar 2023 13:11:42 +0100 [thread overview]
Message-ID: <20230314121216.413434-5-schnelle@linux.ibm.com> (raw)
In-Reply-To: <20230314121216.413434-1-schnelle@linux.ibm.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
drivers/comedi/Kconfig | 103 +++++++++++++++++++++++++++--------------
1 file changed, 68 insertions(+), 35 deletions(-)
diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig
index 9af280735cba..7a8d402f05be 100644
--- a/drivers/comedi/Kconfig
+++ b/drivers/comedi/Kconfig
@@ -67,6 +67,7 @@ config COMEDI_TEST
config COMEDI_PARPORT
tristate "Parallel port support"
+ depends on HAS_IOPORT
help
Enable support for the standard parallel port.
A cheap and easy way to get a few more digital I/O lines. Steal
@@ -79,6 +80,7 @@ config COMEDI_PARPORT
config COMEDI_SSV_DNP
tristate "SSV Embedded Systems DIL/Net-PC support"
depends on X86_32 || COMPILE_TEST
+ depends on HAS_IOPORT
help
Enable support for SSV Embedded Systems DIL/Net-PC
@@ -89,6 +91,7 @@ endif # COMEDI_MISC_DRIVERS
menuconfig COMEDI_ISA_DRIVERS
bool "Comedi ISA and PC/104 drivers"
+ depends on ISA
help
Enable comedi ISA and PC/104 drivers to be built
@@ -100,7 +103,8 @@ if COMEDI_ISA_DRIVERS
config COMEDI_PCL711
tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
@@ -161,8 +165,9 @@ config COMEDI_PCL730
config COMEDI_PCL812
tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
@@ -173,8 +178,9 @@ config COMEDI_PCL812
config COMEDI_PCL816
tristate "Advantech PCL-814 and PCL-816 ISA card support"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for Advantech PCL-814 and PCL-816 ISA cards
@@ -183,8 +189,9 @@ config COMEDI_PCL816
config COMEDI_PCL818
tristate "Advantech PCL-718 and PCL-818 ISA card support"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for Advantech PCL-818 ISA cards
PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
@@ -203,7 +210,7 @@ config COMEDI_PCM3724
config COMEDI_AMPLC_DIO200_ISA
tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
- select COMEDI_AMPLC_DIO200
+ depends on COMEDI_AMPLC_DIO200
help
Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
PC272E ISA DIO boards
@@ -255,7 +262,8 @@ config COMEDI_DAC02
config COMEDI_DAS16M1
tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
@@ -265,7 +273,7 @@ config COMEDI_DAS16M1
config COMEDI_DAS08_ISA
tristate "DAS-08 compatible ISA and PC/104 card support"
- select COMEDI_DAS08
+ depends on COMEDI_DAS08
help
Enable support for Keithley Metrabyte/ComputerBoards DAS08
and compatible ISA and PC/104 cards:
@@ -278,8 +286,9 @@ config COMEDI_DAS08_ISA
config COMEDI_DAS16
tristate "DAS-16 compatible ISA and PC/104 card support"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for Keithley Metrabyte/ComputerBoards DAS16
@@ -296,7 +305,8 @@ config COMEDI_DAS16
config COMEDI_DAS800
tristate "DAS800 and compatible ISA card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
Keithley Metrabyte DAS-800, DAS-801, DAS-802
@@ -308,8 +318,9 @@ config COMEDI_DAS800
config COMEDI_DAS1800
tristate "DAS1800 and compatible ISA card support"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for DAS1800 and compatible ISA cards
Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
@@ -323,7 +334,8 @@ config COMEDI_DAS1800
config COMEDI_DAS6402
tristate "DAS6402 and compatible ISA card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for DAS6402 and compatible ISA cards
Computerboards, Keithley Metrabyte DAS6402 and compatibles
@@ -402,7 +414,8 @@ config COMEDI_FL512
config COMEDI_AIO_AIO12_8
tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
@@ -456,8 +469,9 @@ config COMEDI_ADQ12B
config COMEDI_NI_AT_A2150
tristate "NI AT-A2150 ISA card support"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for National Instruments AT-A2150 cards
@@ -466,7 +480,8 @@ config COMEDI_NI_AT_A2150
config COMEDI_NI_AT_AO
tristate "NI AT-AO-6/10 EISA card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for National Instruments AT-AO-6/10 cards
@@ -497,7 +512,7 @@ config COMEDI_NI_ATMIO16D
config COMEDI_NI_LABPC_ISA
tristate "NI Lab-PC and compatibles ISA support"
- select COMEDI_NI_LABPC
+ depends on COMEDI_NI_LABPC
help
Enable support for National Instruments Lab-PC and compatibles
Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
@@ -561,7 +576,7 @@ endif # COMEDI_ISA_DRIVERS
menuconfig COMEDI_PCI_DRIVERS
tristate "Comedi PCI drivers"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
Enable support for comedi PCI drivers.
@@ -710,7 +725,8 @@ config COMEDI_ADL_PCI8164
config COMEDI_ADL_PCI9111
tristate "ADLink PCI-9111HR support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for ADlink PCI9111 cards
@@ -720,7 +736,7 @@ config COMEDI_ADL_PCI9111
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
depends on HAS_DMA
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
@@ -729,7 +745,8 @@ config COMEDI_ADL_PCI9118
config COMEDI_ADV_PCI1710
tristate "Advantech PCI-171x and PCI-1731 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
PCI-1713 and PCI-1731
@@ -773,7 +790,8 @@ config COMEDI_ADV_PCI1760
config COMEDI_ADV_PCI_DIO
tristate "Advantech PCI DIO card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for Advantech PCI DIO cards
@@ -786,7 +804,7 @@ config COMEDI_ADV_PCI_DIO
config COMEDI_AMPLC_DIO200_PCI
tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
- select COMEDI_AMPLC_DIO200
+ depends on COMEDI_AMPLC_DIO200
help
Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
and PCIe296 DIO boards.
@@ -814,7 +832,8 @@ config COMEDI_AMPLC_PC263_PCI
config COMEDI_AMPLC_PCI224
tristate "Amplicon PCI224 and PCI234 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Amplicon PCI224 and PCI234 AO boards
@@ -823,7 +842,8 @@ config COMEDI_AMPLC_PCI224
config COMEDI_AMPLC_PCI230
tristate "Amplicon PCI230 and PCI260 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
@@ -842,7 +862,7 @@ config COMEDI_CONTEC_PCI_DIO
config COMEDI_DAS08_PCI
tristate "DAS-08 PCI support"
- select COMEDI_DAS08
+ depends on COMEDI_DAS08
help
Enable support for PCI DAS-08 cards.
@@ -929,7 +949,8 @@ config COMEDI_CB_PCIDAS64
config COMEDI_CB_PCIDAS
tristate "MeasurementComputing PCI-DAS support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
@@ -953,7 +974,8 @@ config COMEDI_CB_PCIDDA
config COMEDI_CB_PCIMDAS
tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI Migration
@@ -973,7 +995,8 @@ config COMEDI_CB_PCIMDDA
config COMEDI_ME4000
tristate "Meilhaus ME-4000 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Meilhaus PCI data acquisition cards
ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
@@ -1031,7 +1054,7 @@ config COMEDI_NI_670X
config COMEDI_NI_LABPC_PCI
tristate "NI Lab-PC PCI-1200 support"
- select COMEDI_NI_LABPC
+ depends on COMEDI_NI_LABPC
help
Enable support for National Instruments Lab-PC PCI-1200.
@@ -1053,6 +1076,7 @@ config COMEDI_NI_PCIDIO
config COMEDI_NI_PCIMIO
tristate "NI PCI-MIO-E series and M series support"
depends on HAS_DMA
+ depends on HAS_IOPORT
select COMEDI_NI_TIOCMD
select COMEDI_8255
help
@@ -1074,7 +1098,8 @@ config COMEDI_NI_PCIMIO
config COMEDI_RTD520
tristate "Real Time Devices PCI4520/DM7520 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Real Time Devices PCI4520/DM7520
@@ -1114,7 +1139,8 @@ if COMEDI_PCMCIA_DRIVERS
config COMEDI_CB_DAS16_CS
tristate "CB DAS16 series PCMCIA support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for the ComputerBoards/MeasurementComputing PCMCIA
cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
@@ -1124,7 +1150,7 @@ config COMEDI_CB_DAS16_CS
config COMEDI_DAS08_CS
tristate "CB DAS08 PCMCIA support"
- select COMEDI_DAS08
+ depends on COMEDI_DAS08
help
Enable support for the ComputerBoards/MeasurementComputing DAS-08
PCMCIA card
@@ -1134,6 +1160,7 @@ config COMEDI_DAS08_CS
config COMEDI_NI_DAQ_700_CS
tristate "NI DAQCard-700 PCMCIA support"
+ depends on HAS_IOPORT
help
Enable support for the National Instruments PCMCIA DAQCard-700 DIO
@@ -1142,6 +1169,7 @@ config COMEDI_NI_DAQ_700_CS
config COMEDI_NI_DAQ_DIO24_CS
tristate "NI DAQ-Card DIO-24 PCMCIA support"
+ depends on HAS_IOPORT
select COMEDI_8255
help
Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
@@ -1151,7 +1179,7 @@ config COMEDI_NI_DAQ_DIO24_CS
config COMEDI_NI_LABPC_CS
tristate "NI DAQCard-1200 PCMCIA support"
- select COMEDI_NI_LABPC
+ depends on COMEDI_NI_LABPC
help
Enable support for the National Instruments PCMCIA DAQCard-1200
@@ -1160,6 +1188,7 @@ config COMEDI_NI_LABPC_CS
config COMEDI_NI_MIO_CS
tristate "NI DAQCard E series PCMCIA support"
+ depends on HAS_IOPORT
select COMEDI_NI_TIO
select COMEDI_8255
help
@@ -1172,6 +1201,7 @@ config COMEDI_NI_MIO_CS
config COMEDI_QUATECH_DAQP_CS
tristate "Quatech DAQP PCMCIA data capture card support"
+ depends on HAS_IOPORT
help
Enable support for the Quatech DAQP PCMCIA data capture cards
DAQP-208 and DAQP-308
@@ -1248,12 +1278,14 @@ endif # COMEDI_USB_DRIVERS
config COMEDI_8254
tristate
+ depends on HAS_IOPORT
config COMEDI_8255
tristate
config COMEDI_8255_SA
tristate "Standalone 8255 support"
+ depends on HAS_IOPORT
select COMEDI_8255
help
Enable support for 8255 digital I/O as a standalone driver.
@@ -1285,7 +1317,7 @@ config COMEDI_KCOMEDILIB
called kcomedilib.
config COMEDI_AMPLC_DIO200
- select COMEDI_8254
+ depends on COMEDI_8254
tristate
config COMEDI_AMPLC_PC236
@@ -1294,7 +1326,7 @@ config COMEDI_AMPLC_PC236
config COMEDI_DAS08
tristate
- select COMEDI_8254
+ depends on COMEDI_8254
select COMEDI_8255
config COMEDI_ISADMA
@@ -1302,7 +1334,8 @@ config COMEDI_ISADMA
config COMEDI_NI_LABPC
tristate
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
config COMEDI_NI_LABPC_ISADMA
--
2.37.2
next prev parent reply other threads:[~2023-03-14 12:13 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-14 12:11 [PATCH v3 00/38] Kconfig: Introduce HAS_IOPORT config option Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 01/38] Kconfig: introduce HAS_IOPORT option and select it as necessary Niklas Schnelle
2023-03-14 12:37 ` Johannes Berg
2023-03-23 13:23 ` Niklas Schnelle
2023-03-14 12:48 ` Geert Uytterhoeven
2023-03-14 13:29 ` Arnd Bergmann
2023-03-14 16:11 ` Niklas Schnelle
2023-03-14 16:37 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 02/38] ata: add HAS_IOPORT dependencies Niklas Schnelle
2023-03-15 1:23 ` Damien Le Moal
2023-03-15 6:46 ` Arnd Bergmann
2023-03-15 7:15 ` Damien Le Moal
2023-03-15 7:15 ` Damien Le Moal
2023-03-15 8:39 ` Geert Uytterhoeven
2023-03-15 9:12 ` Damien Le Moal
2023-03-15 11:36 ` Geert Uytterhoeven
2023-03-15 23:57 ` Damien Le Moal
2023-03-16 15:21 ` Arnd Bergmann
2023-04-28 13:32 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 03/38] char: impi, tpm: depend on HAS_IOPORT Niklas Schnelle
2023-03-14 12:20 ` Jarkko Sakkinen
2023-03-14 14:01 ` Arnd Bergmann
2023-03-14 13:52 ` Corey Minyard
2023-03-14 14:17 ` Geert Uytterhoeven
2023-03-14 15:08 ` Arnd Bergmann
2023-03-21 14:33 ` Jason Gunthorpe
2023-03-14 12:11 ` Niklas Schnelle [this message]
2023-03-14 12:11 ` [PATCH v3 05/38] counter: add HAS_IOPORT dependencies Niklas Schnelle
2023-03-14 12:41 ` William Breathitt Gray
2023-04-28 13:27 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 06/38] /dev/port: don't compile file operations without CONFIG_DEVPORT Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 07/38] drm: handle HAS_IOPORT dependencies Niklas Schnelle
2023-03-15 11:54 ` Jani Nikula
2023-03-23 15:05 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 08/38] firmware: dmi-sysfs: handle HAS_IOPORT=n Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 09/38] gpio: add HAS_IOPORT dependencies Niklas Schnelle
2023-03-15 8:42 ` Linus Walleij
2023-04-28 14:41 ` Niklas Schnelle
2023-05-01 12:29 ` Linus Walleij
2023-03-14 12:11 ` [PATCH v3 10/38] hwmon: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 11/38] i2c: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 12/38] iio: ad7606: Kconfig: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 13/38] Input: " Niklas Schnelle
2023-03-15 8:22 ` Geert Uytterhoeven
2023-04-28 14:50 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 14/38] Input: gameport: add ISA and " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 15/38] leds: add " Niklas Schnelle
2023-03-16 16:14 ` Lee Jones
2023-03-23 12:42 ` Niklas Schnelle
2023-03-23 13:32 ` Arnd Bergmann
2023-03-23 14:02 ` Niklas Schnelle
2023-03-23 14:05 ` Arnd Bergmann
2023-03-23 16:11 ` Geert Uytterhoeven
2023-03-23 16:25 ` Arnd Bergmann
2023-03-23 14:53 ` Lee Jones
2023-03-23 15:33 ` Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 16/38] media: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 17/38] misc: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 18/38] mISDN: " Niklas Schnelle
2023-03-15 5:41 ` Jakub Kicinski
2023-03-14 12:11 ` [PATCH v3 19/38] mpt fusion: " Niklas Schnelle
2023-03-14 12:11 ` [PATCH v3 20/38] net: handle " Niklas Schnelle
2023-03-15 5:41 ` Jakub Kicinski
2023-03-15 9:47 ` Maciej W. Rozycki
2023-03-14 12:11 ` [PATCH v3 21/38] parport: PC style parport depends on HAS_IOPORT Niklas Schnelle
2023-03-14 14:12 ` Arnd Bergmann
2023-05-02 13:40 ` Niklas Schnelle
2023-05-02 15:30 ` Bjorn Helgaas
2023-03-14 12:12 ` [PATCH v3 22/38] PCI: Make quirk using inw() depend " Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 23/38] PCI/sysfs: Make I/O resource " Niklas Schnelle
2023-03-14 16:05 ` Bjorn Helgaas
2023-03-14 12:12 ` [PATCH v3 24/38] pcmcia: add HAS_IOPORT dependencies Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 25/38] platform: " Niklas Schnelle
2023-03-15 2:21 ` Tzung-Bi Shih
2023-03-14 12:12 ` [PATCH v3 26/38] pnp: " Niklas Schnelle
2023-03-20 17:37 ` Rafael J. Wysocki
2023-03-21 13:56 ` Rafael J. Wysocki
2023-03-23 12:55 ` Niklas Schnelle
2023-03-24 18:45 ` Wysocki, Rafael J
2023-03-14 12:12 ` [PATCH v3 27/38] power: " Niklas Schnelle
2023-03-29 23:01 ` Sebastian Reichel
2023-03-14 12:12 ` [PATCH v3 28/38] rtc: " Niklas Schnelle
2023-03-14 12:52 ` Alexandre Belloni
2023-05-08 15:36 ` Niklas Schnelle
2023-05-08 20:01 ` Arnd Bergmann
2023-05-09 6:38 ` Geert Uytterhoeven
2023-05-09 8:22 ` Arnd Bergmann
2023-05-09 8:51 ` Geert Uytterhoeven
2023-05-09 9:46 ` Arnd Bergmann
2023-03-14 12:12 ` [PATCH v3 29/38] scsi: " Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 30/38] sound: " Niklas Schnelle
2023-03-14 12:33 ` Takashi Iwai
2023-05-08 16:41 ` Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 31/38] speakup: add HAS_IOPORT dependency for SPEAKUP_SERIALIO Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 32/38] staging: add HAS_IOPORT dependencies Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 33/38] tty: serial: handle " Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 34/38] usb: " Niklas Schnelle
2023-03-14 14:56 ` Arnd Bergmann
2023-03-14 12:12 ` [PATCH v3 35/38] video: " Niklas Schnelle
2023-03-15 8:16 ` Geert Uytterhoeven
2023-03-15 10:19 ` Ville Syrjälä
2023-03-23 14:17 ` Niklas Schnelle
2023-03-23 16:08 ` Ville Syrjälä
2023-05-08 17:09 ` Niklas Schnelle
2023-03-14 12:12 ` [PATCH v3 36/38] watchdog: add " Niklas Schnelle
2023-03-14 14:21 ` Guenter Roeck
2023-03-14 12:12 ` [PATCH v3 37/38] wireless: " Niklas Schnelle
2023-03-15 5:26 ` Kalle Valo
2023-03-14 12:12 ` [PATCH v3 38/38] asm-generic/io.h: drop inb() etc for HAS_IOPORT=n Niklas Schnelle
2023-03-14 14:05 ` [PATCH v3 00/38] Kconfig: Introduce HAS_IOPORT config option Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230314121216.413434-5-schnelle@linux.ibm.com \
--to=schnelle@linux.ibm.com \
--cc=abbotti@mev.co.uk \
--cc=aou@eecs.berkeley.edu \
--cc=arnd@arndb.de \
--cc=arnd@kernel.org \
--cc=bhelgaas@google.com \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=hsweeten@visionengravers.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=rafael@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).