From: Tianyu Lan <ltykernel@gmail.com>
To: kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
decui@microsoft.com, tglx@linutronix.de, mingo@redhat.com,
bp@alien8.de, dave.hansen@linux.intel.com, x86@kernel.org,
hpa@zytor.com, daniel.lezcano@linaro.org, arnd@arndb.de,
michael.h.kelley@microsoft.com
Cc: Tianyu Lan <tiala@microsoft.com>,
linux-arch@vger.kernel.org, linux-hyperv@vger.kernel.org,
linux-kernel@vger.kernel.org, vkuznets@redhat.com
Subject: [PATCH 5/9] x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest
Date: Thu, 1 Jun 2023 11:16:18 -0400 [thread overview]
Message-ID: <20230601151624.1757616-6-ltykernel@gmail.com> (raw)
In-Reply-To: <20230601151624.1757616-1-ltykernel@gmail.com>
From: Tianyu Lan <tiala@microsoft.com>
In sev-snp enlightened guest, Hyper-V hypercall needs
to use vmmcall to trigger vmexit and notify hypervisor
to handle hypercall request.
There is no x86 SEV SNP feature flag support so far and
hardware provides MSR_AMD64_SEV register to check SEV-SNP
capability with MSR_AMD64_SEV_ENABLED bit. ALTERNATIVE can't
work without SEV-SNP x86 feature flag. May add later when
the associated flag is introduced.
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
---
arch/x86/include/asm/mshyperv.h | 44 ++++++++++++++++++++++++---------
1 file changed, 33 insertions(+), 11 deletions(-)
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 31c476f4e656..d859d7c5f5e8 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -61,16 +61,25 @@ static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
u64 hv_status;
#ifdef CONFIG_X86_64
- if (!hv_hypercall_pg)
- return U64_MAX;
+ if (hv_isolation_type_en_snp()) {
+ __asm__ __volatile__("mov %4, %%r8\n"
+ "vmmcall"
+ : "=a" (hv_status), ASM_CALL_CONSTRAINT,
+ "+c" (control), "+d" (input_address)
+ : "r" (output_address)
+ : "cc", "memory", "r8", "r9", "r10", "r11");
+ } else {
+ if (!hv_hypercall_pg)
+ return U64_MAX;
- __asm__ __volatile__("mov %4, %%r8\n"
- CALL_NOSPEC
- : "=a" (hv_status), ASM_CALL_CONSTRAINT,
- "+c" (control), "+d" (input_address)
- : "r" (output_address),
- THUNK_TARGET(hv_hypercall_pg)
- : "cc", "memory", "r8", "r9", "r10", "r11");
+ __asm__ __volatile__("mov %4, %%r8\n"
+ CALL_NOSPEC
+ : "=a" (hv_status), ASM_CALL_CONSTRAINT,
+ "+c" (control), "+d" (input_address)
+ : "r" (output_address),
+ THUNK_TARGET(hv_hypercall_pg)
+ : "cc", "memory", "r8", "r9", "r10", "r11");
+ }
#else
u32 input_address_hi = upper_32_bits(input_address);
u32 input_address_lo = lower_32_bits(input_address);
@@ -104,7 +113,13 @@ static inline u64 _hv_do_fast_hypercall8(u64 control, u64 input1)
u64 hv_status;
#ifdef CONFIG_X86_64
- {
+ if (hv_isolation_type_en_snp()) {
+ __asm__ __volatile__(
+ "vmmcall"
+ : "=a" (hv_status), ASM_CALL_CONSTRAINT,
+ "+c" (control), "+d" (input1)
+ :: "cc", "r8", "r9", "r10", "r11");
+ } else {
__asm__ __volatile__(CALL_NOSPEC
: "=a" (hv_status), ASM_CALL_CONSTRAINT,
"+c" (control), "+d" (input1)
@@ -149,7 +164,14 @@ static inline u64 _hv_do_fast_hypercall16(u64 control, u64 input1, u64 input2)
u64 hv_status;
#ifdef CONFIG_X86_64
- {
+ if (hv_isolation_type_en_snp()) {
+ __asm__ __volatile__("mov %4, %%r8\n"
+ "vmmcall"
+ : "=a" (hv_status), ASM_CALL_CONSTRAINT,
+ "+c" (control), "+d" (input1)
+ : "r" (input2)
+ : "cc", "r8", "r9", "r10", "r11");
+ } else {
__asm__ __volatile__("mov %4, %%r8\n"
CALL_NOSPEC
: "=a" (hv_status), ASM_CALL_CONSTRAINT,
--
2.25.1
next prev parent reply other threads:[~2023-06-01 15:16 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-01 15:16 [PATCH 0/9] x86/hyperv: Add AMD sev-snp enlightened guest support on hyperv Tianyu Lan
2023-06-01 15:16 ` [PATCH 1/9] x86/hyperv: Add sev-snp enlightened guest static key Tianyu Lan
2023-06-05 12:09 ` Vitaly Kuznetsov
2023-06-06 13:43 ` Tianyu Lan
2023-07-18 5:52 ` Tianyu Lan
2023-06-08 12:56 ` Michael Kelley (LINUX)
2023-06-08 13:17 ` Tianyu Lan
2023-06-01 15:16 ` [PATCH 2/9] x86/hyperv: Set Virtual Trust Level in VMBus init message Tianyu Lan
2023-06-08 13:06 ` Michael Kelley (LINUX)
2023-06-08 13:21 ` Tianyu Lan
2023-06-01 15:16 ` [PATCH 3/9] x86/hyperv: Mark Hyper-V vp assist page unencrypted in SEV-SNP enlightened guest Tianyu Lan
2023-06-05 12:13 ` Vitaly Kuznetsov
2023-06-06 15:22 ` Tianyu Lan
2023-06-06 15:49 ` Vitaly Kuznetsov
2023-06-08 13:25 ` Michael Kelley (LINUX)
2023-06-08 13:44 ` Vitaly Kuznetsov
2023-06-01 15:16 ` [PATCH 4/9] drivers: hv: Mark shared pages " Tianyu Lan
2023-06-05 12:54 ` Vitaly Kuznetsov
2023-06-07 8:16 ` Tianyu Lan
2023-06-08 8:54 ` Vitaly Kuznetsov
2023-06-08 14:21 ` Michael Kelley (LINUX)
2023-06-01 15:16 ` Tianyu Lan [this message]
2023-06-05 13:00 ` [PATCH 5/9] x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp " Vitaly Kuznetsov
2023-06-08 13:21 ` Peter Zijlstra
2023-06-08 15:15 ` [EXTERNAL] " Tianyu Lan
2023-06-27 10:57 ` Tianyu Lan
2023-06-27 11:50 ` Peter Zijlstra
2023-06-27 12:05 ` Borislav Petkov
2023-06-27 13:38 ` Peter Zijlstra
2023-06-28 10:53 ` Peter Zijlstra
2023-06-01 15:16 ` [PATCH 6/9] clocksource: hyper-v: Mark hyperv tsc page unencrypted " Tianyu Lan
2023-06-01 15:16 ` [PATCH 7/9] x86/hyperv: Initialize cpu and memory for SEV-SNP " Tianyu Lan
2023-06-08 13:51 ` Michael Kelley (LINUX)
2023-06-09 9:56 ` Jeremi Piotrowski
2023-06-08 14:09 ` Michael Kelley (LINUX)
2023-06-08 15:18 ` Tianyu Lan
2023-06-01 15:16 ` [PATCH 8/9] x86/hyperv: Add smp support for SEV-SNP guest Tianyu Lan
2023-06-01 15:16 ` [PATCH 9/9] x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES Tianyu Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230601151624.1757616-6-ltykernel@gmail.com \
--to=ltykernel@gmail.com \
--cc=arnd@arndb.de \
--cc=bp@alien8.de \
--cc=daniel.lezcano@linaro.org \
--cc=dave.hansen@linux.intel.com \
--cc=decui@microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=hpa@zytor.com \
--cc=kys@microsoft.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.h.kelley@microsoft.com \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=tiala@microsoft.com \
--cc=vkuznets@redhat.com \
--cc=wei.liu@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).