From: "Li Zhe" <lizhe.67@bytedance.com>
To: <akpm@linux-foundation.org>, <apopple@nvidia.com>,
<arnd@arndb.de>, <balbirs@nvidia.com>, <bp@alien8.de>,
<dave.hansen@linux.intel.com>, <david@kernel.org>,
<kees@kernel.org>, <mingo@redhat.com>, <muchun.song@linux.dev>,
<rppt@kernel.org>, <tglx@kernel.org>
Cc: <linux-arch@vger.kernel.org>, <linux-hardening@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-mm@kvack.org>,
<x86@kernel.org>, <lizhe.67@bytedance.com>
Subject: [PATCH v9 2/8] mm: factor zone-device page init helpers out of __init_zone_device_page
Date: Mon, 3 Aug 2026 15:09:23 +0800 [thread overview]
Message-ID: <20260803070929.86075-3-lizhe.67@bytedance.com> (raw)
In-Reply-To: <20260803070929.86075-1-lizhe.67@bytedance.com>
memmap_init_zone_device() currently mixes refcount policy and core
ZONE_DEVICE page setup in a single helper.
Factor the refcount-reset predicate into pagemap_requires_refcount_reset(),
move the common page initialization into __zone_device_page_init(), and
wrap the existing slow path in zone_device_page_init_slow().
This keeps the slow-path behaviour unchanged and gives later patches
reusable helper boundaries.
No functional change intended.
Signed-off-by: Li Zhe <lizhe.67@bytedance.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
---
mm/mm_init.c | 56 ++++++++++++++++++++++++++++++++++------------------
1 file changed, 37 insertions(+), 19 deletions(-)
diff --git a/mm/mm_init.c b/mm/mm_init.c
index 95808ab5cfdb..a70acb7431a6 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -1005,11 +1005,37 @@ static void __init memmap_init(void)
}
#ifdef CONFIG_ZONE_DEVICE
-static void __ref __init_zone_device_page(struct page *page, unsigned long pfn,
+/*
+ * Return true when memmap_init_zone_device() must initialize the page
+ * refcount to 0. MEMORY_DEVICE_GENERIC pages regain a refcount of 1 in
+ * the free path, while the remaining ZONE_DEVICE types start from 0 here
+ * and raise the count again when the allocator or driver hands the page
+ * out.
+ */
+static inline bool pagemap_requires_refcount_reset(const struct dev_pagemap *pgmap)
+{
+ /*
+ * MEMORY_DEVICE_GENERIC pages regain a refcount of 1 in the free
+ * path. The remaining ZONE_DEVICE types start from 0 here and raise
+ * the count again when the allocator or driver hands the page out.
+ */
+ switch (pgmap->type) {
+ case MEMORY_DEVICE_FS_DAX:
+ case MEMORY_DEVICE_PRIVATE:
+ case MEMORY_DEVICE_COHERENT:
+ case MEMORY_DEVICE_PCI_P2PDMA:
+ return true;
+ case MEMORY_DEVICE_GENERIC:
+ return false;
+ }
+
+ return false;
+}
+
+static void __ref __zone_device_page_init(struct page *page, unsigned long pfn,
unsigned long zone_idx, int nid,
struct dev_pagemap *pgmap)
{
-
__init_single_page(page, pfn, zone_idx, nid);
/*
@@ -1028,23 +1054,15 @@ static void __ref __init_zone_device_page(struct page *page, unsigned long pfn,
*/
page_folio(page)->pgmap = pgmap;
page->zone_device_data = NULL;
+}
- /*
- * MEMORY_DEVICE_GENERIC pages regain a refcount of 1 in the free
- * path. The remaining ZONE_DEVICE types start from 0 here and raise
- * the count again when the allocator or driver hands the page out.
- */
- switch (pgmap->type) {
- case MEMORY_DEVICE_FS_DAX:
- case MEMORY_DEVICE_PRIVATE:
- case MEMORY_DEVICE_COHERENT:
- case MEMORY_DEVICE_PCI_P2PDMA:
+static void __ref zone_device_page_init_slow(struct page *page,
+ unsigned long pfn, unsigned long zone_idx, int nid,
+ struct dev_pagemap *pgmap)
+{
+ __zone_device_page_init(page, pfn, zone_idx, nid, pgmap);
+ if (pagemap_requires_refcount_reset(pgmap))
set_page_count(page, 0);
- break;
-
- case MEMORY_DEVICE_GENERIC:
- break;
- }
}
/*
@@ -1090,7 +1108,7 @@ static void __ref memmap_init_compound(struct page *head,
for (pfn = head_pfn + 1; pfn < end_pfn; pfn++) {
struct page *page = pfn_to_page(pfn);
- __init_zone_device_page(page, pfn, zone_idx, nid, pgmap);
+ zone_device_page_init_slow(page, pfn, zone_idx, nid, pgmap);
prep_compound_tail(page, head, order);
set_page_count(page, 0);
}
@@ -1126,7 +1144,7 @@ void __ref memmap_init_zone_device(struct zone *zone,
for (pfn = start_pfn; pfn < end_pfn; pfn += pfns_per_compound) {
struct page *page = pfn_to_page(pfn);
- __init_zone_device_page(page, pfn, zone_idx, nid, pgmap);
+ zone_device_page_init_slow(page, pfn, zone_idx, nid, pgmap);
if (IS_ALIGNED(pfn, PAGES_PER_SECTION))
cond_resched();
--
2.20.1
next prev parent reply other threads:[~2026-08-03 7:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-03 7:09 [PATCH v9 0/8] mm: optimize zone-device memmap initialization Li Zhe
2026-08-03 7:09 ` [PATCH v9 1/8] mm: fix stale ZONE_DEVICE refcount comment Li Zhe
2026-08-03 7:09 ` Li Zhe [this message]
2026-08-03 7:09 ` [PATCH v9 3/8] mm: add a set_page_section_from_pfn() helper Li Zhe
2026-08-03 7:09 ` [PATCH v9 4/8] mm: add a template-based fast path for zone-device page init Li Zhe
2026-08-03 8:39 ` Muchun Song
2026-08-05 9:50 ` Li Zhe
2026-08-03 7:09 ` [PATCH v9 5/8] mm: extend the template fast path to zone-device compound tails Li Zhe
2026-08-03 7:09 ` [PATCH v9 6/8] string: introduce memcpy_nontemporal() Li Zhe
2026-08-03 7:09 ` [PATCH v9 7/8] mm: use memcpy_nontemporal() in zone-device template copies Li Zhe
2026-08-03 7:09 ` [PATCH v9 8/8] x86/string: extend memcpy_flushcache() fixed-size fastpaths Li Zhe
2026-08-04 20:35 ` Borislav Petkov
2026-08-05 11:04 ` Li Zhe
2026-08-03 21:40 ` [PATCH v9 0/8] mm: optimize zone-device memmap initialization Andrew Morton
2026-08-05 9:49 ` Li Zhe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260803070929.86075-3-lizhe.67@bytedance.com \
--to=lizhe.67@bytedance.com \
--cc=akpm@linux-foundation.org \
--cc=apopple@nvidia.com \
--cc=arnd@arndb.de \
--cc=balbirs@nvidia.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=david@kernel.org \
--cc=kees@kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@redhat.com \
--cc=muchun.song@linux.dev \
--cc=rppt@kernel.org \
--cc=tglx@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox