From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org,
iommu@lists.linux-foundation.org, robin.murphy@arm.com,
vinod.koul@intel.com, geert+renesas@glider.be,
linus.walleij@linaro.org, dan.j.williams@intel.com,
arnd@arndb.de, linux-arch@vger.kernel.org
Subject: Re: [PATCH v3 5/8] dmaengine: rcar-dmac: group slave configuration
Date: Thu, 11 Feb 2016 02:14:35 +0200 [thread overview]
Message-ID: <2394364.dCGqmLNa8V@avalon> (raw)
In-Reply-To: <1455065878-11906-6-git-send-email-niklas.soderlund+renesas@ragnatech.se>
Hi Niklas,
Thank you for the patch.
On Wednesday 10 February 2016 01:57:55 Niklas Söderlund wrote:
> Group slave address and transfer size in own structs for source and
> destination. This is in preparation for hooking up the dma-mapping API
> to the slave addresses.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/dma/sh/rcar-dmac.c | 37 +++++++++++++++++++++----------------
> 1 file changed, 21 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
> index 7820d07..743873c 100644
> --- a/drivers/dma/sh/rcar-dmac.c
> +++ b/drivers/dma/sh/rcar-dmac.c
> @@ -118,14 +118,21 @@ struct rcar_dmac_desc_page {
> sizeof(struct rcar_dmac_xfer_chunk))
>
> /*
> + * @slave_addr: slave memory address
> + * @xfer_size: size (in bytes) of hardware transfers
> + */
> +struct rcar_dmac_chan_slave {
> + dma_addr_t slave_addr;
> + unsigned int xfer_size;
> +};
> +
> +/*
> * struct rcar_dmac_chan - R-Car Gen2 DMA Controller Channel
> * @chan: base DMA channel object
> * @iomem: channel I/O memory base
> * @index: index of this channel in the controller
> - * @src_xfer_size: size (in bytes) of hardware transfers on the source side
> - * @dst_xfer_size: size (in bytes) of hardware transfers on the
> destination side - * @src_slave_addr: slave source memory address
> - * @dst_slave_addr: slave destination memory address
> + * @src: slave memory address and size on the source side
> + * @dst: slave memory address and size on the destination side
> * @mid_rid: hardware MID/RID for the DMA client using this channel
> * @lock: protects the channel CHCR register and the desc members
> * @desc.free: list of free descriptors
> @@ -142,10 +149,8 @@ struct rcar_dmac_chan {
> void __iomem *iomem;
> unsigned int index;
>
> - unsigned int src_xfer_size;
> - unsigned int dst_xfer_size;
> - dma_addr_t src_slave_addr;
> - dma_addr_t dst_slave_addr;
> + struct rcar_dmac_chan_slave src;
> + struct rcar_dmac_chan_slave dst;
> int mid_rid;
>
> spinlock_t lock;
> @@ -793,13 +798,13 @@ static void rcar_dmac_chan_configure_desc(struct
> rcar_dmac_chan *chan, case DMA_DEV_TO_MEM:
> chcr = RCAR_DMACHCR_DM_INC | RCAR_DMACHCR_SM_FIXED
>
> | RCAR_DMACHCR_RS_DMARS;
>
> - xfer_size = chan->src_xfer_size;
> + xfer_size = chan->src.xfer_size;
> break;
>
> case DMA_MEM_TO_DEV:
> chcr = RCAR_DMACHCR_DM_FIXED | RCAR_DMACHCR_SM_INC
>
> | RCAR_DMACHCR_RS_DMARS;
>
> - xfer_size = chan->dst_xfer_size;
> + xfer_size = chan->dst.xfer_size;
> break;
>
> case DMA_MEM_TO_MEM:
> @@ -1038,7 +1043,7 @@ rcar_dmac_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl, }
>
> dev_addr = dir == DMA_DEV_TO_MEM
> - ? rchan->src_slave_addr : rchan->dst_slave_addr;
> + ? rchan->src.slave_addr : rchan->dst.slave_addr;
> return rcar_dmac_chan_prep_sg(rchan, sgl, sg_len, dev_addr,
> dir, flags, false);
> }
> @@ -1093,7 +1098,7 @@ rcar_dmac_prep_dma_cyclic(struct dma_chan *chan,
> dma_addr_t buf_addr, }
>
> dev_addr = dir == DMA_DEV_TO_MEM
> - ? rchan->src_slave_addr : rchan->dst_slave_addr;
> + ? rchan->src.slave_addr : rchan->dst.slave_addr;
> desc = rcar_dmac_chan_prep_sg(rchan, sgl, sg_len, dev_addr,
> dir, flags, true);
>
> @@ -1110,10 +1115,10 @@ static int rcar_dmac_device_config(struct dma_chan
> *chan, * We could lock this, but you shouldn't be configuring the
> * channel, while using it...
> */
> - rchan->src_slave_addr = cfg->src_addr;
> - rchan->dst_slave_addr = cfg->dst_addr;
> - rchan->src_xfer_size = cfg->src_addr_width;
> - rchan->dst_xfer_size = cfg->dst_addr_width;
> + rchan->src.slave_addr = cfg->src_addr;
> + rchan->dst.slave_addr = cfg->dst_addr;
> + rchan->src.xfer_size = cfg->src_addr_width;
> + rchan->dst.xfer_size = cfg->dst_addr_width;
>
> return 0;
> }
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2016-02-11 0:14 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-10 0:57 [PATCH v3 0/8] dmaengine: rcar-dmac: add iommu support for slave transfers Niklas Söderlund
2016-02-10 0:57 ` Niklas Söderlund
2016-02-10 0:57 ` [PATCH v3 1/8] iommu: Add MMIO mapping type Niklas Söderlund
2016-02-10 0:57 ` Niklas Söderlund
[not found] ` <1455065878-11906-2-git-send-email-niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
2016-02-11 0:02 ` Laurent Pinchart
2016-02-11 0:02 ` Laurent Pinchart
2016-02-11 15:57 ` Robin Murphy
[not found] ` <56BCAF66.8010206-5wv7dgnIgG8@public.gmane.org>
2016-02-16 12:06 ` Niklas Söderlund
2016-02-16 12:06 ` Niklas Söderlund
2016-02-16 12:43 ` Robin Murphy
2016-02-16 12:43 ` Robin Murphy
2016-02-16 13:30 ` Niklas Söderlund
2016-02-16 13:30 ` Niklas Söderlund
2016-02-10 0:57 ` [PATCH v3 2/8] dma-mapping: add {map,unmap}_resource to dma_map_ops Niklas Söderlund
2016-02-10 0:57 ` Niklas Söderlund
2016-02-10 12:11 ` Sergei Shtylyov
2016-02-10 12:11 ` Sergei Shtylyov
2016-02-11 0:03 ` Laurent Pinchart
2016-02-11 0:03 ` Laurent Pinchart
2016-02-10 0:57 ` [PATCH v3 3/8] dma-mapping: add dma_{map,unmap}_resource Niklas Söderlund
2016-02-10 0:57 ` Niklas Söderlund
[not found] ` <1455065878-11906-4-git-send-email-niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
2016-02-10 10:25 ` Robin Murphy
2016-02-10 10:25 ` Robin Murphy
2016-02-10 0:57 ` [PATCH v3 4/8] arm: dma-mapping: add {map,unmap}_resource for iommu ops Niklas Söderlund
2016-02-10 0:57 ` Niklas Söderlund
2016-02-11 0:12 ` Laurent Pinchart
2016-02-11 0:12 ` Laurent Pinchart
2016-02-10 0:57 ` [PATCH v3 5/8] dmaengine: rcar-dmac: group slave configuration Niklas Söderlund
2016-02-10 0:57 ` Niklas Söderlund
2016-02-11 0:14 ` Laurent Pinchart [this message]
2016-02-11 0:14 ` Laurent Pinchart
2016-02-10 0:57 ` [PATCH v3 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers Niklas Söderlund
2016-02-10 0:57 ` Niklas Söderlund
[not found] ` <1455065878-11906-7-git-send-email-niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
2016-02-10 10:49 ` Robin Murphy
2016-02-10 10:49 ` Robin Murphy
2016-02-11 0:33 ` Laurent Pinchart
2016-02-11 0:33 ` Laurent Pinchart
2016-02-10 0:57 ` [PATCH v3 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1 Niklas Söderlund
2016-02-10 0:57 ` Niklas Söderlund
2016-02-10 17:55 ` Simon Horman
2016-02-11 0:50 ` Niklas Söderlund
2016-02-11 0:41 ` Laurent Pinchart
2016-02-10 0:57 ` [PATCH v3 8/8] ARM: dts: r8a7791: " Niklas Söderlund
2016-02-10 0:57 ` Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2394364.dCGqmLNa8V@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=arnd@arndb.de \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=iommu@lists.linux-foundation.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=robin.murphy@arm.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).