From: Brian King <brking@us.ibm.com>
To: Matthew Wilcox <matthew@wil.cx>
Cc: Greg KH <greg@kroah.com>, Christoph Hellwig <hch@infradead.org>,
linux-kernel@vger.kernel.org, linuxppc64-dev@ozlabs.org,
linux-pci@vger.kernel.org, linux-arch@vger.kernel.org,
paulus@samba.org
Subject: Re: pci: Arch hook to determine config space size
Date: Mon, 31 Jan 2005 15:35:38 -0600 [thread overview]
Message-ID: <41FEA4AA.1080407@us.ibm.com> (raw)
In-Reply-To: <20050131192955.GJ31145@parcelfarce.linux.theplanet.co.uk>
[-- Attachment #1: Type: text/plain, Size: 811 bytes --]
Matthew Wilcox wrote:
> Basically, ppc64's config ops are broken and need to check the offset
> being read. Here's i386:
>
> static int pci_conf1_write (int seg, int bus, int devfn, int reg, int len, u32 v
> alue)
> {
> unsigned long flags;
>
> if ((bus > 255) || (devfn > 255) || (reg > 255))
> return -EINVAL;
Here is a pure ppc64 implementation that does this.
>
> I think all the config ops in ppc64 are broken and need to check for these
> limits. Also, it does some checks that are already performed by upper layers:
>
> if (where & (size - 1))
> return PCIBIOS_BAD_REGISTER_NUMBER;
>
> is checked for in drivers/pci/access.c
I can submit a separate patch to clean that up.
--
Brian King
eServer Storage I/O
IBM Linux Technology Center
[-- Attachment #2: ppc64_pcix_mode2_cfg.patch --]
[-- Type: text/plain, Size: 3237 bytes --]
When working with a PCI-X Mode 2 adapter on a PCI-X Mode 1 PPC64
system, the current code used to determine the config space size
of a device results in a PCI Master abort and an EEH error, resulting
in the device being taken offline. This patch checks OF to see if
the PCI bridge supports PCI-X Mode 2 and fails config accesses beyond
256 bytes if it does not.
Signed-off-by: Brian King <brking@us.ibm.com>
---
linux-2.6.11-rc2-bk9-bjking1/arch/ppc64/kernel/pSeries_pci.c | 25 +++++++++++
linux-2.6.11-rc2-bk9-bjking1/include/asm-ppc64/prom.h | 1
2 files changed, 26 insertions(+)
diff -puN arch/ppc64/kernel/pSeries_pci.c~ppc64_pcix_mode2_cfg arch/ppc64/kernel/pSeries_pci.c
--- linux-2.6.11-rc2-bk9/arch/ppc64/kernel/pSeries_pci.c~ppc64_pcix_mode2_cfg 2005-01-31 14:32:01.000000000 -0600
+++ linux-2.6.11-rc2-bk9-bjking1/arch/ppc64/kernel/pSeries_pci.c 2005-01-31 15:09:53.000000000 -0600
@@ -52,6 +52,16 @@ static int s7a_workaround;
extern struct mpic *pSeries_mpic;
+static int config_access_valid(struct device_node *dn, int where)
+{
+ struct device_node *hose_dn = dn->phb->arch_data;
+
+ if (where < 256 || hose_dn->pci_ext_config_space)
+ return 1;
+
+ return 0;
+}
+
static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val)
{
int returnval = -1;
@@ -62,6 +72,8 @@ static int rtas_read_config(struct devic
return PCIBIOS_DEVICE_NOT_FOUND;
if (where & (size - 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
+ if (!config_access_valid(dn, where))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
addr = (dn->busno << 16) | (dn->devfn << 8) | where;
buid = dn->phb->buid;
@@ -110,6 +122,8 @@ static int rtas_write_config(struct devi
return PCIBIOS_DEVICE_NOT_FOUND;
if (where & (size - 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
+ if (!config_access_valid(dn, where))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
addr = (dn->busno << 16) | (dn->devfn << 8) | where;
buid = dn->phb->buid;
@@ -270,6 +284,16 @@ static int phb_set_bus_ranges(struct dev
return 0;
}
+static void __devinit get_phb_config_space_type(struct device_node *dn)
+{
+ int *type = (int *)get_property(dn, "ibm,pci-config-space-type", NULL);
+
+ if (type && *type == 1)
+ dn->pci_ext_config_space = 1;
+ else
+ dn->pci_ext_config_space = 0;
+}
+
static int __devinit setup_phb(struct device_node *dev,
struct pci_controller *phb,
unsigned int addr_size_words)
@@ -285,6 +309,7 @@ static int __devinit setup_phb(struct de
phb->arch_data = dev;
phb->ops = &rtas_pci_ops;
phb->buid = get_phb_buid(dev);
+ get_phb_config_space_type(dev);
return 0;
}
diff -puN include/asm-ppc64/prom.h~ppc64_pcix_mode2_cfg include/asm-ppc64/prom.h
--- linux-2.6.11-rc2-bk9/include/asm-ppc64/prom.h~ppc64_pcix_mode2_cfg 2005-01-31 14:32:01.000000000 -0600
+++ linux-2.6.11-rc2-bk9-bjking1/include/asm-ppc64/prom.h 2005-01-31 14:32:01.000000000 -0600
@@ -137,6 +137,7 @@ struct device_node {
int devfn; /* for pci devices */
int eeh_mode; /* See eeh.h for possible EEH_MODEs */
int eeh_config_addr;
+ int pci_ext_config_space; /* for phb's or bridges */
struct pci_controller *phb; /* for pci devices */
struct iommu_table *iommu_table; /* for phb's or bridges */
_
next prev parent reply other threads:[~2005-01-31 21:35 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200501281456.j0SEuI12020454@d01av01.pok.ibm.com>
[not found] ` <20050128185234.GB21760@infradead.org>
[not found] ` <20050129040647.GA6261@kroah.com>
2005-01-31 19:10 ` pci: Arch hook to determine config space size Brian King
2005-01-31 19:15 ` Greg KH
2005-01-31 19:29 ` Matthew Wilcox
2005-01-31 20:51 ` Arnd Bergmann
2005-01-31 21:35 ` Brian King [this message]
2005-01-31 21:56 ` Arnd Bergmann
2005-01-31 22:13 ` Greg KH
2005-01-31 22:43 ` Brian King
2005-02-01 3:15 ` Benjamin Herrenschmidt
2005-02-01 4:52 ` Brian King
2005-02-01 4:57 ` Benjamin Herrenschmidt
2005-02-02 10:05 ` Arnd Bergmann
2005-02-03 0:23 ` Benjamin Herrenschmidt
2005-02-01 12:32 ` Matthew Wilcox
2005-02-01 20:16 ` Brian King
2005-01-31 19:40 ` Brian King
2005-02-01 7:46 ` Grant Grundler
2005-02-01 15:23 ` Brian King
2005-01-31 23:22 arndb
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41FEA4AA.1080407@us.ibm.com \
--to=brking@us.ibm.com \
--cc=greg@kroah.com \
--cc=hch@infradead.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc64-dev@ozlabs.org \
--cc=matthew@wil.cx \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox