From: Jonas Bonn <jonas@southpole.se>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Subject: [PATCH v3 14/19] OpenRISC: Module support
Date: Sun, 17 Jul 2011 17:08:24 +0200 [thread overview]
Message-ID: <41fa99ff7e0eb9d55ace8ebc628c667b8545e104.1310913472.git.jonas@southpole.se> (raw)
In-Reply-To: <cover.1310913472.git.jonas@southpole.se>
In-Reply-To: <cover.1310913472.git.jonas@southpole.se>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
---
arch/openrisc/kernel/module.c | 72 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 72 insertions(+), 0 deletions(-)
create mode 100644 arch/openrisc/kernel/module.c
diff --git a/arch/openrisc/kernel/module.c b/arch/openrisc/kernel/module.c
new file mode 100644
index 0000000..10ff50f
--- /dev/null
+++ b/arch/openrisc/kernel/module.c
@@ -0,0 +1,72 @@
+/*
+ * OpenRISC module.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location;
+ uint32_t value;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+ value = sym->st_value + rel[i].r_addend;
+
+ switch (ELF32_R_TYPE(rel[i].r_info)) {
+ case R_OR32_32:
+ *location = value;
+ break;
+ case R_OR32_CONST:
+ location = (uint16_t *)location + 1;
+ *((uint16_t *)location) = (uint16_t) (value);
+ break;
+ case R_OR32_CONSTH:
+ location = (uint16_t *)location + 1;
+ *((uint16_t *)location) = (uint16_t) (value >> 16);
+ break;
+ case R_OR32_JUMPTARG:
+ value -= (uint32_t)location;
+ value >>= 2;
+ value &= 0x03ffffff;
+ value |= *location & 0xfc000000;
+ *location = value;
+ break;
+ default:
+ pr_err("module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rel[i].r_info));
+ break;
+ }
+ }
+
+ return 0;
+}
--
1.7.4.1
next prev parent reply other threads:[~2011-07-17 15:08 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-17 15:08 [PATCH v3 00/19] OpenRISC Architecture Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 01/19] OpenRISC: Boot code Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
[not found] ` <cover.1310913472.git.jonas-A9uVI2HLR7kOP4wsBPIw7w@public.gmane.org>
2011-07-17 15:08 ` [PATCH v3 02/19] OpenRISC: Device tree Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 03/19] OpenRISC: Memory management Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 04/19] OpenRISC: Signal handling Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 05/19] OpenRISC: Build infrastructure Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 06/19] OpenRISC: PTrace Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 07/19] OpenRISC: DMA Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 08/19] OpenRISC: Timekeeping Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 09/19] OpenRISC: IRQ Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 10/19] OpenRISC: System calls Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 11/19] OpenRISC: Idle/Power management Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 12/19] OpenRISC: Scheduling/Process management Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 13/19] OpenRISC: GPIO Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn [this message]
2011-07-17 15:08 ` [PATCH v3 14/19] OpenRISC: Module support Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 15/19] OpenRISC: Traps Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 16/19] OpenRISC: Headers Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 17/19] OpenRISC: Library routines Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 18/19] OpenRISC: Miscellaneous Jonas Bonn
2011-07-17 15:08 ` Jonas Bonn
2011-07-17 15:08 ` [PATCH v3 19/19] OpenRISC: Add MAINTAINERS entry Jonas Bonn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41fa99ff7e0eb9d55ace8ebc628c667b8545e104.1310913472.git.jonas@southpole.se \
--to=jonas@southpole.se \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).