linux-arch.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: James Hogan <james.hogan@imgtec.com>
To: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: robherring2@gmail.com, inux-kernel@vger.kernel.org,
	linux-arch@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
	Grant Likely <grant.likely@secretlab.ca>,
	devicetree-discuss@lists.ozlabs.org,
	Rob Herring <rob.herring@calxeda.com>
Subject: Re: [PATCH v4 32/71] ARC: [DeviceTree] Basic support
Date: Wed, 30 Jan 2013 11:08:03 +0000	[thread overview]
Message-ID: <5108FF13.7080404@imgtec.com> (raw)
In-Reply-To: <1359467723-4269-1-git-send-email-vgupta@synopsys.com>

Hi Vineet

On 29/01/13 13:55, Vineet Gupta wrote:
> diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
> index a353849..7666857 100644
> --- a/arch/arc/Kconfig
> +++ b/arch/arc/Kconfig
> @@ -24,8 +24,11 @@ config ARC

> +	select OF

> diff --git a/arch/arc/Makefile b/arch/arc/Makefile
> index 4d52a3b..29b5fcd 100644
> --- a/arch/arc/Makefile
> +++ b/arch/arc/Makefile
> @@ -83,6 +83,9 @@ head-y		:= arch/arc/kernel/head.o

> +# w/o this dtb won't embed into kernel binary
> +core-y		+= arch/arc/boot/dts/

> diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
> new file mode 100644
> index 0000000..ea3114c
> --- /dev/null
> +++ b/arch/arc/boot/dts/Makefile
> @@ -0,0 +1,17 @@
> +ifeq ($(CONFIG_OF),y)

This doesn't seem necessary since you select OF (and if you didn't you
could put core-$(CONFIG_OF) in the main Makefile.

> diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
> index 6d83431..eeab7c79 100644
> --- a/arch/arc/kernel/Makefile
> +++ b/arch/arc/kernel/Makefile
> @@ -7,6 +7,7 @@
>  
>  obj-y	:= arcksyms.o setup.o irq.o time.o reset.o ptrace.o entry.o process.o
>  obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o clk.o
> +obj-y   += devtree.o

nit: whitespace is inconsistent here.

> diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
> index 82ac206..27aebd6 100644
> --- a/arch/arc/kernel/setup.c
> +++ b/arch/arc/kernel/setup.c

> @@ -71,6 +76,8 @@ void __init setup_arch(char **cmdline_p)
>  	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
>  	*cmdline_p = command_line;
>  
> +	rc = setup_machine_fdt(__dtb_start);

Should this panic or something if it fails? Actually I see it does in
your -next branch, so I guess it's fixed in a later patch.

So other than the stuff above:
Reviewed-by: James Hogan <james.hogan@imgtec.com>

  reply	other threads:[~2013-01-30 11:08 UTC|newest]

Thread overview: 75+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-24 10:50 [PATCH v3 00/71] Synopsys ARC Linux kernel Port (Part #1) Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 01/71] ARC: Generic Headers Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 02/71] ARC: Build system: Makefiles, Kconfig, Linker script Vineet Gupta
2013-01-28  6:29   ` Vineet Gupta
2013-01-28 18:44     ` Sam Ravnborg
2013-01-29 13:45       ` Vineet Gupta
2013-01-29 17:52         ` Sam Ravnborg
2013-02-11 11:29   ` James Hogan
2013-02-11 11:44     ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 06/71] ARC: uaccess friends Vineet Gupta
2013-01-24 10:50   ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 11/71] ARC: Fundamental ARCH data-types/defines Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 17/71] ARC: Syscall support (no-legacy-syscall ABI) Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 18/71] ARC: Process-creation/scheduling/idle-loop Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 19/71] ARC: Timers/counters/delay management Vineet Gupta
2013-01-24 10:50   ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 20/71] ARC: Signal handling Vineet Gupta
2013-01-24 10:50   ` Vineet Gupta
2013-02-11  7:26   ` pt_regs leak into userspace (was Re: [PATCH v3 20/71] ARC: Signal handling) Vineet Gupta
2013-02-11  9:36     ` Jonas Bonn
2013-02-11 10:13       ` Vineet Gupta
2013-02-11 10:28         ` James Hogan
2013-02-11 10:53           ` Jonas Bonn
2013-02-11 10:57             ` James Hogan
2013-02-11 11:01             ` James Hogan
2013-02-11 11:22             ` Vineet Gupta
2013-02-11 12:12               ` Jonas Bonn
2013-02-11 12:37                 ` Vineet Gupta
2013-02-11 13:02                   ` Jonas Bonn
2013-02-11 13:08                     ` Vineet Gupta
2013-02-11 10:30         ` Jonas Bonn
2013-02-11 10:30           ` Jonas Bonn
2013-02-11 14:07           ` Al Viro
2013-02-15  7:23             ` Jonas Bonn
2013-02-15  7:35               ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 21/71] ARC: [Review] Preparing to fix incorrect syscall restarts due to signals Vineet Gupta
2013-01-24 10:50   ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 22/71] ARC: [Review] Prevent incorrect syscall restarts Vineet Gupta
2013-01-28  7:42   ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 23/71] ARC: Cache Flush Management Vineet Gupta
2013-01-24 10:50   ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 29/71] ARC: I/O and DMA Mappings Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 30/71] ARC: Boot #1: low-level, setup_arch(), /proc/cpuinfo, mem init Vineet Gupta
     [not found] ` <1359024639-21915-1-git-send-email-vgupta-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2013-01-24 10:50   ` [PATCH v3 32/71] ARC: [DeviceTree] Basic support Vineet Gupta
2013-01-24 10:50     ` Vineet Gupta
2013-01-28  7:40     ` Vineet Gupta
2013-01-28 10:21     ` James Hogan
2013-01-29  9:53       ` Vineet Gupta
2013-01-29  9:53         ` Vineet Gupta
2013-01-29 10:06         ` James Hogan
     [not found]     ` <1359024639-21915-15-git-send-email-vgupta-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2013-01-29 13:25       ` Rob Herring
2013-01-29 13:25         ` Rob Herring
     [not found]         ` <5107CDD3.3050502-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-01-29 13:39           ` Vineet Gupta
2013-01-29 13:39             ` Vineet Gupta
2013-01-29 13:55         ` [PATCH v4 " Vineet Gupta
2013-01-30 11:08           ` James Hogan [this message]
2013-01-30 11:56             ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 33/71] ARC: [DeviceTree] Convert some Kconfig items to runtime values Vineet Gupta
2013-01-24 10:50   ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 34/71] ARC: [plat-arcfpga]: Enabling DeviceTree for Angel4 board Vineet Gupta
2013-01-24 10:50   ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 42/71] ARC: Module support Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 44/71] ARC: SMP support Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 48/71] ARC: kprobes support Vineet Gupta
2013-01-24 10:50   ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 57/71] ARC: Hostlink Pseudo-Driver for Metaware Debugger Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 58/71] ARC: UAPI Disintegrate arch/arc/include/asm Vineet Gupta
2013-01-24 10:50   ` Vineet Gupta
2013-01-28  7:36   ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 59/71] ARC: Add support for ioremap_prot API Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 62/71] ARC: [Review] Multi-platform image #2: Board callback Infrastructure Vineet Gupta
2013-01-24 10:50   ` Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 69/71] ARC: [plat-arcfpga] defconfig for fully loaded ARC Linux Vineet Gupta
2013-01-24 10:50 ` [PATCH v3 70/71] ARC: Provide a default serial.h for uart drivers needing BASE_BAUD Vineet Gupta
2013-01-24 11:01 ` [PATCH v3 45/71] ARC: DWARF2 .debug_frame based stack unwinder Vineet Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5108FF13.7080404@imgtec.com \
    --to=james.hogan@imgtec.com \
    --cc=Vineet.Gupta1@synopsys.com \
    --cc=arnd@arndb.de \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=inux-kernel@vger.kernel.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=rob.herring@calxeda.com \
    --cc=robherring2@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).