From: Kevin Hilman <khilman@deeprootsystems.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
Yinghai Lu <yinghai@kernel.org>, Rabin Vincent <rabin@rab.in>,
lkml <linux-kernel@vger.kernel.org>,
penberg@cs.helsinki.fi, cl@linux-foundation.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
linux-arch@vger.kernel.org, David Howells <dhowells@redhat.com>
Subject: Re: start_kernel(): bug: interrupts were enabled early
Date: Wed, 07 Apr 2010 12:09:17 -0700 [thread overview]
Message-ID: <878w8zcc6a.fsf@deeprootsystems.com> (raw)
In-Reply-To: <alpine.LFD.2.00.1004010904540.3707@i5.linux-foundation.org> (Linus Torvalds's message of "Thu\, 1 Apr 2010 09\:13\:31 -0700 \(PDT\)")
Linus Torvalds <torvalds@linux-foundation.org> writes:
> On Wed, 31 Mar 2010, H. Peter Anvin wrote:
>>
>> The obvious way to fix this would be to use
>> spin_lock_irqsave..spin_lock_irqrestore in __down_read as well as in the
>> other locations; I don't have a good feel for what the cost of doing so
>> would be, though. On x86 it's fairly expensive simply because the only
>> way to save the state is to push it on the stack, which the compiler
>> doesn't deal well with, but this code isn't used on x86.
>
[...]
> So making the slow-path do the spin_[un]lock_irq{save,restore}() versions
> sounds like the right thing. It won't be a performance issue: it _is_ the
> slow-path, and we're already doing the expensive part (the spinlock itself
> and the irq thing).
>
> So ACK on the idea. Who wants to write the trivial patch and test it?
OK, I'll bite since I was seeing boot-time hangs on ARM (TI OMAP3) due
to this. Patch below.
Kevin
From 7baff4008353bbfd2a2e2a4da22b87bc4efa4194 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 7 Apr 2010 11:52:46 -0700
Subject: [PATCH] rwsem generic spinlock: use IRQ save/restore spinlocks
rwsems can be used with IRQs disabled, particularily in early boot
before IRQs are enabled. Currently the spin_unlock_irq() usage in the
slow-patch will unconditionally enable interrupts and cause problems
since interrupts are not yet initialized or enabled.
This patch uses save/restore versions of IRQ spinlocks in the slowpath
to ensure interrupts are not unintentionally disabled.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
lib/rwsem-spinlock.c | 14 ++++++++------
1 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/lib/rwsem-spinlock.c b/lib/rwsem-spinlock.c
index ccf95bf..ffc9fc7 100644
--- a/lib/rwsem-spinlock.c
+++ b/lib/rwsem-spinlock.c
@@ -143,13 +143,14 @@ void __sched __down_read(struct rw_semaphore *sem)
{
struct rwsem_waiter waiter;
struct task_struct *tsk;
+ unsigned long flags;
- spin_lock_irq(&sem->wait_lock);
+ spin_lock_irqsave(&sem->wait_lock, flags);
if (sem->activity >= 0 && list_empty(&sem->wait_list)) {
/* granted */
sem->activity++;
- spin_unlock_irq(&sem->wait_lock);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
goto out;
}
@@ -164,7 +165,7 @@ void __sched __down_read(struct rw_semaphore *sem)
list_add_tail(&waiter.list, &sem->wait_list);
/* we don't need to touch the semaphore struct anymore */
- spin_unlock_irq(&sem->wait_lock);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
/* wait to be given the lock */
for (;;) {
@@ -209,13 +210,14 @@ void __sched __down_write_nested(struct rw_semaphore *sem, int subclass)
{
struct rwsem_waiter waiter;
struct task_struct *tsk;
+ unsigned long flags;
- spin_lock_irq(&sem->wait_lock);
+ spin_lock_irqsave(&sem->wait_lock, flags);
if (sem->activity == 0 && list_empty(&sem->wait_list)) {
/* granted */
sem->activity = -1;
- spin_unlock_irq(&sem->wait_lock);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
goto out;
}
@@ -230,7 +232,7 @@ void __sched __down_write_nested(struct rw_semaphore *sem, int subclass)
list_add_tail(&waiter.list, &sem->wait_list);
/* we don't need to touch the semaphore struct anymore */
- spin_unlock_irq(&sem->wait_lock);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
/* wait to be given the lock */
for (;;) {
--
1.7.0.2
next prev parent reply other threads:[~2010-04-07 19:09 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20100325194100.GA2364@debian>
2010-03-31 20:40 ` start_kernel(): bug: interrupts were enabled early Andrew Morton
2010-03-31 20:47 ` Yinghai Lu
2010-03-31 20:47 ` Yinghai Lu
2010-03-31 20:52 ` Andrew Morton
2010-03-31 21:12 ` H. Peter Anvin
2010-03-31 21:28 ` Andrew Morton
2010-03-31 22:35 ` Benjamin Herrenschmidt
2010-04-01 16:13 ` Linus Torvalds
2010-04-01 14:27 ` Andrew Morton
2010-04-01 20:12 ` Linus Torvalds
2010-04-02 14:46 ` David Howells
2010-04-02 14:54 ` Linus Torvalds
2010-04-07 19:09 ` Kevin Hilman [this message]
2010-04-08 15:55 ` Américo Wang
2010-04-08 15:55 ` Américo Wang
2010-03-31 21:01 ` Matthew Wilcox
2010-03-31 21:05 ` H. Peter Anvin
2010-03-31 21:17 ` Matthew Wilcox
2010-03-31 21:42 ` Christoph Lameter
2010-03-31 21:54 ` Russell King
2010-03-31 21:57 ` H. Peter Anvin
2010-03-31 21:57 ` H. Peter Anvin
2010-03-31 22:30 ` Russell King
2010-03-31 22:37 ` Benjamin Herrenschmidt
2010-03-31 22:49 ` Andrew Morton
2010-04-01 1:17 ` Benjamin Herrenschmidt
2010-03-31 22:26 ` Andrew Morton
2010-04-01 6:26 ` H. Peter Anvin
2010-04-01 3:33 ` Andrew Morton
2010-04-01 6:48 ` Benjamin Herrenschmidt
2010-04-01 11:06 ` David Howells
2010-04-01 15:55 ` Christoph Lameter
2010-04-01 23:00 ` Benjamin Herrenschmidt
2010-04-01 16:15 ` H. Peter Anvin
2010-04-01 16:15 ` H. Peter Anvin
2010-04-01 6:50 ` Benjamin Herrenschmidt
2010-03-31 22:36 ` Benjamin Herrenschmidt
2010-04-01 15:57 ` Christoph Lameter
2010-03-31 21:05 ` Russell King
2010-03-31 21:05 ` Russell King
2010-03-31 21:08 ` H. Peter Anvin
2010-03-31 21:08 ` H. Peter Anvin
2010-03-31 22:58 ` David Howells
2010-04-01 9:41 ` Jamie Lokier
2010-04-01 10:50 ` David Howells
2010-04-01 11:23 ` Matthew Wilcox
2010-03-31 22:31 ` Benjamin Herrenschmidt
2010-03-31 22:36 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=878w8zcc6a.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=akpm@linux-foundation.org \
--cc=benh@kernel.crashing.org \
--cc=cl@linux-foundation.org \
--cc=dhowells@redhat.com \
--cc=hpa@zytor.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=penberg@cs.helsinki.fi \
--cc=rabin@rab.in \
--cc=torvalds@linux-foundation.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox