From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-arch@vger.kernel.org
Subject: [PATCH 09/16] h8300: kernel startup
Date: Wed, 21 Jan 2015 13:30:08 +0900 [thread overview]
Message-ID: <87mw5cvjqn.wl-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <cover.1421813622.git.ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
create mode 100644 arch/h8300/boot/Makefile
create mode 100644 arch/h8300/boot/compressed/Makefile
create mode 100644 arch/h8300/boot/compressed/head.S
create mode 100644 arch/h8300/boot/compressed/misc.c
create mode 100644 arch/h8300/boot/compressed/vmlinux.lds
create mode 100644 arch/h8300/boot/compressed/vmlinux.scr
create mode 100644 arch/h8300/kernel/head_ram.S
create mode 100644 arch/h8300/kernel/head_rom.S
diff --git a/arch/h8300/boot/Makefile b/arch/h8300/boot/Makefile
new file mode 100644
index 0000000..5072b36
--- /dev/null
+++ b/arch/h8300/boot/Makefile
@@ -0,0 +1,27 @@
+# arch/h8300/boot/Makefile
+
+targets := vmlinux.srec vmlinux.bin zImage
+subdir- := compressed
+
+OBJCOPYFLAGS_vmlinux.srec := -Osrec
+OBJCOPYFLAGS_vmlinux.bin := -Obinary
+OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S
+
+UIMAGE_LOADADDR = $(CONFIG_RAMBASE)
+UIMAGE_ENTRYADDR = $(shell /bin/bash -c 'printf "0x%08x" \
+ $$[$(CONFIG_RAMBASE) + $(CONFIG_OFFSET)]')
+
+$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
+$(obj)/uImage.bin: $(obj)/vmlinux.bin
+ $(call if_changed,uimage,none)
+
+CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec arch/$(ARCH)/uImage.bin
+
diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile
new file mode 100644
index 0000000..87d03b7
--- /dev/null
+++ b/arch/h8300/boot/compressed/Makefile
@@ -0,0 +1,37 @@
+#
+# linux/arch/sh/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
+
+OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+#
+# IMAGE_OFFSET is the load offset of the compression loader
+# Assign dummy values if these 2 variables are not defined,
+# in order to suppress error message.
+#
+CONFIG_MEMORY_START ?= 0x00400000
+CONFIG_BOOT_LINK_OFFSET ?= 0x00140000
+IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET))))
+
+LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300-linux -T
+OBJCOPYFLAGS := -O binary
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S
new file mode 100644
index 0000000..74c0d8cc
--- /dev/null
+++ b/arch/h8300/boot/compressed/head.S
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/h8300/boot/compressed/head.S
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ */
+
+#include <linux/linkage.h>
+
+ .section .text..startup,"ax"
+ .global startup
+startup:
+ mov.l er0, er4
+ mov.l er0, sp
+ mov.l #__sbss, er0
+ mov.l #__ebss, er1
+ sub.l er0, er1
+ shlr er1
+ shlr er1
+ sub.l er2, er2
+1:
+ mov.l er2, @er0
+ adds #4, er0
+ dec.l #1, er1
+ bne 1b
+ jsr @decompress_kernel
+ mov.l er4, er0
+ jmp @0x400000
+
+ .align 9
+fake_headers_as_bzImage:
+ .word 0
+ .ascii "HdrS" ; header signature
+ .word 0x0202 ; header version number (>= 0x0105)
+ ; or else old loadlin-1.5 will fail)
+ .word 0 ; default_switch
+ .word 0 ; SETUPSEG
+ .word 0x1000
+ .word 0 ; pointing to kernel version string
+ .byte 0 ; = 0, old one (LILO, Loadlin,
+ ; 0xTV: T=0 for LILO
+ ; V = version
+ .byte 1 ; Load flags bzImage=1
+ .word 0x8000 ; size to move, when setup is not
+ .long 0x100000 ; 0x100000 = default for big kernel
+ .long 0 ; address of loaded ramdisk image
+ .long 0 ; its size in bytes
+
+ .end
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
new file mode 100644
index 0000000..7042741
--- /dev/null
+++ b/arch/h8300/boot/compressed/misc.c
@@ -0,0 +1,74 @@
+/*
+ * arch/h8300/boot/compressed/misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Adapted for h8300 by Yoshinori Sato 2006
+ */
+
+#include <asm/uaccess.h>
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n) memset((s), (0), (n))
+
+extern int _end;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
+
+extern char input_data[];
+extern int input_len;
+static unsigned char *output;
+
+#define HEAP_SIZE 0x10000
+
+#include "../../../../lib/decompress_inflate.c"
+
+void *memset(void *s, int c, size_t n)
+{
+ int i;
+ char *ss = (char *)s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
+ return s;
+}
+
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ int i;
+ char *d = (char *)dest, *s = (char *)src;
+
+ for (i = 0; i < n; i++)
+ d[i] = s[i];
+ return dest;
+}
+
+static void error(char *x)
+{
+
+ while (1)
+ ; /* Halt */
+}
+
+#define STACK_SIZE (4096)
+long user_stack[STACK_SIZE];
+long *stack_start = &user_stack[STACK_SIZE];
+
+void decompress_kernel(void)
+{
+ free_mem_ptr = (unsigned long)&_end;
+ free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
+ decompress(input_data, input_len, NULL, NULL, output, NULL, error);
+}
diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds
new file mode 100644
index 0000000..a0a3a0e
--- /dev/null
+++ b/arch/h8300/boot/compressed/vmlinux.lds
@@ -0,0 +1,32 @@
+SECTIONS
+{
+ .text :
+ {
+ __stext = . ;
+ __text = .;
+ *(.text..startup)
+ *(.text)
+ __etext = . ;
+ }
+
+ .rodata :
+ {
+ *(.rodata)
+ }
+ .data :
+
+ {
+ __sdata = . ;
+ ___data_start = . ;
+ *(.data.*)
+ }
+ .bss :
+ {
+ . = ALIGN(0x4) ;
+ __sbss = . ;
+ *(.bss*)
+ . = ALIGN(0x4) ;
+ __ebss = . ;
+ __end = . ;
+ }
+}
diff --git a/arch/h8300/boot/compressed/vmlinux.scr b/arch/h8300/boot/compressed/vmlinux.scr
new file mode 100644
index 0000000..a0849036
--- /dev/null
+++ b/arch/h8300/boot/compressed/vmlinux.scr
@@ -0,0 +1,9 @@
+SECTIONS
+{
+ .data : {
+ input_len = .;
+ LONG(input_data_end - input_data) input_data = .;
+ *(.data)
+ input_data_end = .;
+ }
+}
diff --git a/arch/h8300/kernel/head_ram.S b/arch/h8300/kernel/head_ram.S
new file mode 100644
index 0000000..f64b3d9
--- /dev/null
+++ b/arch/h8300/kernel/head_ram.S
@@ -0,0 +1,60 @@
+
+#include <linux/sys.h>
+#include <linux/init.h>
+#include <asm/unistd.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+
+#if defined(CONFIG_CPU_H8300H)
+ .h8300h
+#define SYSCR 0xfee012
+#define IRAMTOP 0xffff20
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .h8300s
+#define INTCR 0xffff31
+#define IRAMTOP 0xffc000
+#endif
+
+ __HEAD
+ .global _start
+_start:
+ mov.l #IRAMTOP,sp
+ /* .bss clear */
+ mov.l #_sbss,er5
+ mov.l #_ebss,er4
+ sub.l er5,er4
+ shlr er4
+ shlr er4
+ sub.l er1,er1
+1:
+ mov.l er1,@er5
+ adds #4,er5
+ dec.l #1,er4
+ bne 1b
+ jsr @parse_bootparam
+
+ /* linux kernel start */
+#if defined(CONFIG_CPU_H8300H)
+ ldc #0xd0,ccr /* running kernel */
+ mov.l #SYSCR,er0
+ bclr #3,@er0
+#endif
+#if defined(CONFIG_CPU_H8S)
+ ldc #0x07,exr
+ bclr #4,@INTCR:8
+ bset #5,@INTCR:8 /* Interrupt mode 2 */
+ ldc #0x90,ccr /* running kernel */
+#endif
+ mov.l #init_thread_union,sp
+ add.l #0x2000,sp
+ jsr @start_kernel
+
+1:
+ bra 1b
+
+ .end
diff --git a/arch/h8300/kernel/head_rom.S b/arch/h8300/kernel/head_rom.S
new file mode 100644
index 0000000..60ca8fa
--- /dev/null
+++ b/arch/h8300/kernel/head_rom.S
@@ -0,0 +1,108 @@
+#include <linux/init.h>
+#include <asm/thread_info.h>
+
+#if defined(CONFIG_CPU_H8300H)
+ .h8300h
+#define SYSCR 0xfee012
+#define IRAMTOP 0xffff20
+#define NR_INT 64
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .h8300s
+#define INTCR 0xffff31
+#define IRAMTOP 0xffc000
+#define NR_INT 128
+#endif
+
+ __HEAD
+ .global _start
+_start:
+ mov.l #IRAMTOP,sp
+#if !defined(CONFIG_H8300H_SIM) && \
+ !defined(CONFIG_H8S_SIM)
+ jsr @lowlevel_init
+
+ /* copy .data */
+ mov.l #_begin_data,er5
+ mov.l #_sdata,er6
+ mov.l #_edata,er4
+ sub.l er6,er4
+ shlr.l er4
+ shlr.l er4
+1:
+ mov.l @er5+,er0
+ mov.l er0,@er6
+ adds #4,er6
+ dec.l #1,er4
+ bne 1b
+ /* .bss clear */
+ mov.l #_sbss,er5
+ mov.l #_ebss,er4
+ sub.l er5,er4
+ shlr er4
+ shlr er4
+ sub.l er0,er0
+1:
+ mov.l er0,@er5
+ adds #4,er5
+ dec.l #1,er4
+ bne 1b
+#else
+ /* get cmdline from gdb */
+ jsr @0xcc
+ ;; er0 - argc
+ ;; er1 - argv
+ mov.l #command_line,er3
+ adds #4,er1
+ dec.l #1,er0
+ beq 4f
+1:
+ mov.l @er1+,er2
+2:
+ mov.b @er2+,r4l
+ beq 3f
+ mov.b r4l,@er3
+ adds #1,er3
+ bra 2b
+3:
+ mov.b #' ',r4l
+ mov.b r4l,@er3
+ adds #1,er3
+ dec.l #1,er0
+ bne 1b
+ subs #1,er3
+ mov.b #0,r4l
+ mov.b r4l,@er3
+4:
+#endif
+ /* linux kernel start */
+#if defined(CONFIG_CPU_H8300H)
+ ldc #0xd0,ccr /* running kernel */
+ mov.l #SYSCR,er0
+ bclr #3,@er0
+#endif
+#if defined(CONFIG_CPU_H8S)
+ ldc #0x07,exr
+ bclr #4,@INTCR:8
+ bset #5,@INTCR:8 /* Interrupt mode 2 */
+ ldc #0x90,ccr /* running kernel */
+#endif
+ mov.l #init_thread_union,sp
+ add.l #0x2000,sp
+ jsr @start_kernel
+
+1:
+ bra 1b
+
+#if defined(CONFIG_ROMKERNEL)
+ /* interrupt vector */
+ .section .vectors,"ax"
+ .long _start
+ .long _start
+vector = 2
+ .rept NR_INT - 2
+ .long _interrupt_redirect_table+vector*4
+vector = vector + 1
+ .endr
+#endif
+ .end
--
2.1.3
next prev parent reply other threads:[~2015-01-21 4:58 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1421813622.git.ysato@users.sourceforge.jp>
2015-01-21 4:23 ` [PATCH 01/16] h8300: Assembly headers Yoshinori Sato
2015-01-21 11:02 ` Geert Uytterhoeven
2015-01-21 17:22 ` Yoshinori Sato
2015-01-21 4:23 ` [PATCH 02/16] h8300: UAPI headers Yoshinori Sato
2015-01-21 8:46 ` Arnd Bergmann
2015-01-21 17:16 ` Yoshinori Sato
2015-01-21 4:24 ` [PATCH 03/16] h8300: defconfigs Yoshinori Sato
2015-01-21 8:47 ` Arnd Bergmann
2015-01-21 4:24 ` [PATCH 04/16] h8300: Memory management Yoshinori Sato
2015-01-21 10:57 ` Geert Uytterhoeven
2015-01-21 17:20 ` Yoshinori Sato
2015-01-21 4:25 ` [PATCH 05/16] h8300: Target depend (hw define) part Yoshinori Sato
2015-01-21 4:27 ` [PATCH 06/16] drivers: Add h8300 Yoshinori Sato
2015-01-21 11:03 ` Geert Uytterhoeven
2015-01-21 17:23 ` Yoshinori Sato
2015-01-21 4:29 ` [PATCH 07/16] Add ELF machine Yoshinori Sato
2015-01-21 4:29 ` [PATCH 08/16] h8300: Build scripts Yoshinori Sato
2015-01-21 4:30 ` Yoshinori Sato [this message]
2015-01-21 4:30 ` [PATCH 10/16] h8300: Exception and Interrupt handler Yoshinori Sato
2015-01-21 4:31 ` [PATCH 11/16] h8300: Libraries Yoshinori Sato
2015-01-21 4:31 ` [PATCH 12/16] h8300: clocksource Yoshinori Sato
2015-01-21 8:49 ` Arnd Bergmann
2015-01-21 17:06 ` Yoshinori Sato
2015-01-21 4:31 ` [PATCH 13/16] h8300: ptrace helper Yoshinori Sato
2015-01-21 8:51 ` Arnd Bergmann
2015-01-21 17:08 ` Yoshinori Sato
2015-01-21 4:32 ` [PATCH 14/16] h8300: signal handler Yoshinori Sato
2015-01-21 4:32 ` [PATCH 15/16] h8300: system call entry table Yoshinori Sato
2015-01-21 4:32 ` [PATCH 16/16] h8300: misc functions Yoshinori Sato
2015-01-21 9:01 ` Arnd Bergmann
2015-01-21 17:19 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mw5cvjqn.wl-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=linux-arch@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).