[PATCH] ARM: S3C64XX: Remove un-used code

[kgene.kim@samsung.com (Kukjin Kim)]

Banajit Goswami wrote:
> 
> Remove un-used backlight code for SMDK6410 board
> 
> Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
> ---
>  arch/arm/mach-s3c64xx/mach-smdk6410.c |   39
---------------------------------
>  1 files changed, 0 insertions(+), 39 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-
> s3c64xx/mach-smdk6410.c
> index ecbea92..a9f3183 100644
> --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
> +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
> @@ -262,45 +262,6 @@ static struct samsung_keypad_platdata
> smdk6410_keypad_data __initdata = {
>  	.cols		= 8,
>  };
> 
> -static int smdk6410_backlight_init(struct device *dev)
> -{
> -	int ret;
> -
> -	ret = gpio_request(S3C64XX_GPF(15), "Backlight");
> -	if (ret) {
> -		printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
> -		return ret;
> -	}
> -
> -	/* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */
> -	s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
> -
> -	return 0;
> -}
> -
> -static void smdk6410_backlight_exit(struct device *dev)
> -{
> -	s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT);
> -	gpio_free(S3C64XX_GPF(15));
> -}
> -
> -static struct platform_pwm_backlight_data smdk6410_backlight_data = {
> -	.pwm_id		= 1,
> -	.max_brightness	= 255,
> -	.dft_brightness	= 255,
> -	.pwm_period_ns	= 78770,
> -	.init		= smdk6410_backlight_init,
> -	.exit		= smdk6410_backlight_exit,
> -};
> -
> -static struct platform_device smdk6410_backlight_device = {
> -	.name		= "pwm-backlight",
> -	.dev		= {
> -		.parent		= &s3c_device_timer[1].dev,
> -		.platform_data	= &smdk6410_backlight_data,
> -	},
> -};
> -
>  static struct map_desc smdk6410_iodesc[] = {};
> 
>  static struct platform_device *smdk6410_devices[] __initdata = {
> --
> 1.7.2.3

OK, applied.
Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.