linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jingoohan1@gmail.com (Jingoo Han)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC Patch V1 08/12] PCI: Use helper functions to access fields in struct msi_desc
Date: Sun, 12 Jul 2015 20:18:29 +0900	[thread overview]
Message-ID: <000001d0bc94$81cc5ca0$856515e0$@com> (raw)
In-Reply-To: <1436428847-8886-9-git-send-email-jiang.liu@linux.intel.com>

On Thursday, July 09, 2015 5:01 PM, Jiang Liu wrote:
> 
> Use helper functions to access fields in struct msi_desc, so we could
> easily refine msi_desc later.
> 
> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>

For pcie-designware.c,

Acked-by: Jingoo Han <jingoohan1@gmail.com>

Best regards,
Jingoo Han

> ---
>  drivers/pci/host/pci-keystone-dw.c |    6 +++---
>  drivers/pci/host/pcie-designware.c |    4 ++--
>  drivers/pci/host/pcie-xilinx.c     |   12 +++++-------
>  drivers/pci/msi.c                  |   13 ++++++++-----
>  4 files changed, 18 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-keystone-dw.c b/drivers/pci/host/pci-keystone-dw.c
> index f34892e0edb4..e792086c1639 100644
> --- a/drivers/pci/host/pci-keystone-dw.c
> +++ b/drivers/pci/host/pci-keystone-dw.c
> @@ -109,7 +109,7 @@ static void ks_dw_pcie_msi_irq_ack(struct irq_data *d)
>  	struct pcie_port *pp;
> 
>  	msi = irq_get_msi_desc(irq);
> -	pp = sys_to_pcie(msi->dev->bus->sysdata);
> +	pp = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
>  	ks_pcie = to_keystone_pcie(pp);
>  	offset = irq - irq_linear_revmap(pp->irq_domain, 0);
>  	update_reg_offset_bit_pos(offset, &reg_offset, &bit_pos);
> @@ -148,7 +148,7 @@ static void ks_dw_pcie_msi_irq_mask(struct irq_data *d)
>  	u32 offset;
> 
>  	msi = irq_get_msi_desc(irq);
> -	pp = sys_to_pcie(msi->dev->bus->sysdata);
> +	pp = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
>  	ks_pcie = to_keystone_pcie(pp);
>  	offset = irq - irq_linear_revmap(pp->irq_domain, 0);
> 
> @@ -170,7 +170,7 @@ static void ks_dw_pcie_msi_irq_unmask(struct irq_data *d)
>  	u32 offset;
> 
>  	msi = irq_get_msi_desc(irq);
> -	pp = sys_to_pcie(msi->dev->bus->sysdata);
> +	pp = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
>  	ks_pcie = to_keystone_pcie(pp);
>  	offset = irq - irq_linear_revmap(pp->irq_domain, 0);
> 
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 69486be7181e..65596f96763c 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -255,7 +255,7 @@ static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
>  static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
>  {
>  	int irq, pos0, i;
> -	struct pcie_port *pp = sys_to_pcie(desc->dev->bus->sysdata);
> +	struct pcie_port *pp = sys_to_pcie(msi_desc_to_pci_sysdata(desc));
> 
>  	pos0 = bitmap_find_free_region(pp->msi_irq_in_use, MAX_MSI_IRQS,
>  				       order_base_2(no_irqs));
> @@ -327,7 +327,7 @@ static void dw_msi_teardown_irq(struct msi_controller *chip, unsigned int irq)
>  {
>  	struct irq_data *data = irq_get_irq_data(irq);
>  	struct msi_desc *msi = irq_data_get_msi(data);
> -	struct pcie_port *pp = sys_to_pcie(msi->dev->bus->sysdata);
> +	struct pcie_port *pp = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
> 
>  	clear_irq_range(pp, irq, 1, data->hwirq);
>  }
> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
> index f1a06a091ccb..64454f416639 100644
> --- a/drivers/pci/host/pcie-xilinx.c
> +++ b/drivers/pci/host/pcie-xilinx.c
> @@ -227,18 +227,16 @@ static struct pci_ops xilinx_pcie_ops = {
>   */
>  static void xilinx_pcie_destroy_msi(unsigned int irq)
>  {
> -	struct irq_desc *desc;
>  	struct msi_desc *msi;
>  	struct xilinx_pcie_port *port;
> 
> -	desc = irq_to_desc(irq);
> -	msi = irq_desc_get_msi_desc(desc);
> -	port = sys_to_pcie(msi->dev->bus->sysdata);
> -
> -	if (!test_bit(irq, msi_irq_in_use))
> +	if (!test_bit(irq, msi_irq_in_use)) {
> +		msi = irq_get_msi_desc(irq);
> +		port = sys_to_pcie(msi_desc_to_pci_sys_data(msi));
>  		dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
> -	else
> +	} else {
>  		clear_bit(irq, msi_irq_in_use);
> +	}
>  }
> 
>  /**
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index d09afa78d7a1..6497608545e2 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -208,7 +208,8 @@ u32 __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> 
>  	mask_bits &= ~mask;
>  	mask_bits |= flag;
> -	pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits);
> +	pci_write_config_dword(msi_desc_to_pci_dev(desc), desc->mask_pos,
> +			       mask_bits);
> 
>  	return mask_bits;
>  }
> @@ -288,7 +289,9 @@ void default_restore_msi_irqs(struct pci_dev *dev)
> 
>  void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
>  {
> -	BUG_ON(entry->dev->current_state != PCI_D0);
> +	struct pci_dev *dev = msi_desc_to_pci_dev(entry);
> +
> +	BUG_ON(dev->current_state != PCI_D0);
> 
>  	if (entry->msi_attrib.is_msix) {
>  		void __iomem *base = entry->mask_base +
> @@ -298,7 +301,6 @@ void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
>  		msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR);
>  		msg->data = readl(base + PCI_MSIX_ENTRY_DATA);
>  	} else {
> -		struct pci_dev *dev = entry->dev;
>  		int pos = dev->msi_cap;
>  		u16 data;
> 
> @@ -318,7 +320,9 @@ void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
> 
>  void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
>  {
> -	if (entry->dev->current_state != PCI_D0) {
> +	struct pci_dev *dev = msi_desc_to_pci_dev(entry);
> +
> +	if (dev->current_state != PCI_D0) {
>  		/* Don't touch the hardware now */
>  	} else if (entry->msi_attrib.is_msix) {
>  		void __iomem *base;
> @@ -329,7 +333,6 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
>  		writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
>  		writel(msg->data, base + PCI_MSIX_ENTRY_DATA);
>  	} else {
> -		struct pci_dev *dev = entry->dev;
>  		int pos = dev->msi_cap;
>  		u16 msgctl;
> 
> --
> 1.7.10.4

  reply	other threads:[~2015-07-12 11:18 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-09  8:00 [RFC Patch V1 00/12] Reorganize struct msi_desc to prepare for support of generic MSI Jiang Liu
2015-07-09  8:00 ` [RFC Patch V1 01/12] PCI: Add helper function msi_desc_to_pci_sysdata() Jiang Liu
2015-07-09  8:00 ` [RFC Patch V1 02/12] MIPS, PCI: Use for_pci_msi_entry() to access MSI device list Jiang Liu
2015-07-09 11:03   ` Sergei Shtylyov
2015-07-09  8:00 ` [RFC Patch V1 03/12] PowerPC, " Jiang Liu
2015-07-09  8:00 ` [RFC Patch V1 04/12] s390/pci: " Jiang Liu
2015-07-13 12:47   ` Sebastian Ott
2015-07-09  8:00 ` [RFC Patch V1 05/12] x86, PCI: " Jiang Liu
2015-07-09 19:07   ` Konrad Rzeszutek Wilk
2015-07-09  8:00 ` [RFC Patch V1 06/12] " Jiang Liu
2015-07-09 19:08   ` Konrad Rzeszutek Wilk
2015-07-09  8:00 ` [RFC Patch V1 07/12] sparc, PCI: Use helper functions to access fields in struct msi_desc Jiang Liu
2015-07-09  8:00   ` David Miller
2015-07-09  8:00 ` [RFC Patch V1 08/12] " Jiang Liu
2015-07-12 11:18   ` Jingoo Han [this message]
2015-07-09  8:00 ` [RFC Patch V1 09/12] genirq: Move msi_list from struct pci_dev to struct device Jiang Liu
2015-07-10  0:19   ` Paul Gortmaker
2015-07-21 22:02     ` Thomas Gleixner
2015-07-09  8:00 ` [RFC Patch V1 10/12] genirq, PCI: Store 'struct device *' instead 'struct pci_dev *' in struct msi_desc Jiang Liu
2015-07-09  8:00 ` [RFC Patch V1 11/12] genirq, PCI: Reorginize struct msi_desc to prepare for support of generic MSI Jiang Liu
2015-07-10 12:41   ` Marc Zyngier
2015-07-09  8:00 ` [RFC Patch V1 12/12] genirq, PCI: Move alloc_msi_entry() from PCI MSI code into generic MSI code Jiang Liu
2015-07-10  1:41 ` [RFC Patch V1 00/12] Reorganize struct msi_desc to prepare for support of generic MSI Yijing Wang
2015-07-10 12:54 ` Marc Zyngier
2015-07-21  8:31 ` Thomas Gleixner
2015-07-21 13:30 ` Bjorn Helgaas
2015-07-21 15:51   ` Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='000001d0bc94$81cc5ca0$856515e0$@com' \
    --to=jingoohan1@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).