linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jingoohan1@gmail.com (Jingoo Han)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 0/8] Add Analogix Core Display Port Driver
Date: Thu, 6 Aug 2015 23:41:36 +0900	[thread overview]
Message-ID: <000201d0d056$06cff040$146fd0c0$@com> (raw)
In-Reply-To: <1438868947-22132-1-git-send-email-ykk@rock-chips.com>

On Thursday, August 06, 2015 10:49 PM, Yakir Yang wrote:
> 
> Hi all,
>    Samsung exynos and Rockchip rk3288 almost share same dp controller,
> so I split the common code out, then rk3288 and exynos can re-used the
> same dp core driver. Cause I can't find the exact IP name of exynos dp
> controller, so I decide to name dp core driver with "analogix" which I
> find in rk3288 eDP TRM ;)


OK, I see.
The Samsung Exynos eDP contoller and Rockchip rk3288 eDP contoller share
the same IP. So, a lot of parts can be re-used. I agree with this.
However, we have to review the code carefully, as others did.

I also cannot find the exact IP name. The "analogix" may be the vendor name
of this IP.

Best regards,
Jingoo Han

> 
> Beyond that, there are three light registers setting differents bewteen
> exynos and rk3288.
> 1. RK3288 have five special pll resigters which not indicata in exynos
>    dp controller.
> 2. The address of DP_PHY_PD(dp phy power manager register) are different
>    between rk3288 and exynos.
> 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug
>    register).
> 
> My series patches can be divider into two parts: One for spliting the
> analogix_dp code from exynos dp driver. Another are trying to add rk3288
> dp driver support.
> 
> Best regards,
> - Yakir
> 
> 
> Yakir Yang (8):
>   drm: exynos/dp: fix code style
>   drm: exynos/dp: convert to drm bridge mode
>   drm: bridge: analogix_dp: split exynos dp driver to bridge dir
>   drm: rockchip/dp: add rockchip platform dp driver
>   drm: bridge/analogix_dp: add platform device type support
>   drm: bridge: analogix_dp: add some rk3288 special registers setting
>   drm: bridge: analogix_dp: try force hpd after plug in lookup failed
>   drm: bridge/analogix_dp: expand the delay time for hpd detect
> 
>  drivers/gpu/drm/bridge/Kconfig                     |    5 +
>  drivers/gpu/drm/bridge/Makefile                    |    1 +
>  drivers/gpu/drm/bridge/analogix_dp_core.c          | 1397 +++++++++++++++++++
>  drivers/gpu/drm/bridge/analogix_dp_core.h          |  287 ++++
>  drivers/gpu/drm/bridge/analogix_dp_reg.c           | 1295 ++++++++++++++++++
>  .../exynos_dp_reg.h => bridge/analogix_dp_reg.h}   |  272 ++--
>  drivers/gpu/drm/exynos/Kconfig                     |    5 +-
>  drivers/gpu/drm/exynos/Makefile                    |    2 +-
>  drivers/gpu/drm/exynos/analogix_dp-exynos.c        |  241 ++++
>  drivers/gpu/drm/exynos/exynos_dp_core.c            | 1416 --------------------
>  drivers/gpu/drm/exynos/exynos_dp_core.h            |  282 ----
>  drivers/gpu/drm/exynos/exynos_dp_reg.c             |  100 +-
>  drivers/gpu/drm/rockchip/Kconfig                   |   10 +
>  drivers/gpu/drm/rockchip/Makefile                  |    1 +
>  drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    |  420 ++++++
>  include/drm/bridge/analogix_dp.h                   |   28 +
>  16 files changed, 3880 insertions(+), 1882 deletions(-)
>  create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.c
>  create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.h
>  create mode 100644 drivers/gpu/drm/bridge/analogix_dp_reg.c
>  rename drivers/gpu/drm/{exynos/exynos_dp_reg.h => bridge/analogix_dp_reg.h} (62%)
>  create mode 100644 drivers/gpu/drm/exynos/analogix_dp-exynos.c
>  delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.c
>  delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.h
>  create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>  create mode 100644 include/drm/bridge/analogix_dp.h
> 
> --
> 2.1.2

  parent reply	other threads:[~2015-08-06 14:41 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-06 13:49 [RFC PATCH 0/8] Add Analogix Core Display Port Driver Yakir Yang
2015-08-06 13:58 ` [RFC PATCH 1/8] drm: exynos/dp: fix code style Yakir Yang
2015-08-06 14:04 ` Yakir Yang
2015-08-06 15:05   ` Joe Perches
2015-08-06 15:20     ` Yakir Yang
2015-08-06 14:07 ` [RFC PATCH 2/8] drm: exynos/dp: convert to drm bridge mode Yakir Yang
2015-08-06 14:19   ` Jingoo Han
2015-08-06 14:29     ` Yakir Yang
2015-08-07 11:25       ` Daniel Vetter
2015-08-07 13:18         ` Yakir Yang
2015-08-06 14:19 ` [RFC PATCH 4/8] drm: rockchip/dp: add rockchip platform dp driver Yakir Yang
2015-08-06 14:19 ` [RFC PATCH 5/8] drm: bridge/analogix_dp: add platform device type support Yakir Yang
2015-08-06 14:22 ` [RFC PATCH 6/8] drm: bridge: analogix_dp: add some rk3288 special registers setting Yakir Yang
2015-08-06 14:24 ` [RFC PATCH 7/8] drm: bridge: analogix_dp: try force hpd after plug in lookup failed Yakir Yang
2015-08-06 14:26 ` [RFC PATCH 8/8] drm: bridge/analogix_dp: expand the delay time for hpd detect Yakir Yang
2015-08-06 14:41 ` Jingoo Han [this message]
2015-08-06 15:00   ` [RFC PATCH 0/8] Add Analogix Core Display Port Driver Yakir Yang
     [not found] ` <1438870763-23796-1-git-send-email-ykk@rock-chips.com>
     [not found]   ` <000101d0d054$f34e9c70$d9ebd550$@com>
2015-08-06 14:57     ` [RFC PATCH 3/8] drm: bridge: analogix_dp: split exynos dp driver to bridge dir Yakir Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='000201d0d056$06cff040$146fd0c0$@com' \
    --to=jingoohan1@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).