From: jg1.han@samsung.com (Jingoo Han)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] USB: ehci-s5p: add DMA burst support
Date: Thu, 01 Mar 2012 14:40:03 +0900 [thread overview]
Message-ID: <000801ccf76d$c01e2a00$405a7e00$%han@samsung.com> (raw)
DMA burst support is added to improve performance in EHCI data
transfer. The USB EHCI controller on Exynos SoCs can use INCR16,
INCR8, and INCR4 mode. These modes of INSNREG00 register should
be set in order to enable DMA burst transfer. This feature is
also related to AHB spec.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Sangwook Lee <sangwook.lee@linaro.org>
---
v2: change the definition name from EHCI_ENA_xxx to EHCI_INSNREG00_ENA_xxx.
drivers/usb/host/ehci-s5p.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 293f741..b337f72 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <plat/ehci.h>
#include <plat/usb-phy.h>
+#include <mach/regs-usb-host.h>
struct s5p_ehci_hcd {
struct device *dev;
@@ -128,6 +129,9 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
ehci->regs = hcd->regs +
HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase));
+ /* DMA burst Enable */
+ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
@@ -234,6 +238,9 @@ static int s5p_ehci_resume(struct device *dev)
if (pdata && pdata->phy_init)
pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+ /* DMA burst Enable */
+ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
if (time_before(jiffies, ehci->next_statechange))
msleep(100);
--
1.7.1
reply other threads:[~2012-03-01 5:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000801ccf76d$c01e2a00$405a7e00$%han@samsung.com' \
--to=jg1.han@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).