[PATCH 3/3] ARM: s3c: Kconfig.s3c64xx: Fix indentation

Juerg Haefliger
2022-05-23T08:02:19Z

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
---
arch/arm/mach-s3c/Kconfig.s3c64xx | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index af01675d8769..bbaa8ff3367b 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -99,7 +99,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
config S3C64XX_SETUP_SPI
bool
help
- Common setup code for SPI GPIO configurations
+ Common setup code for SPI GPIO configurations

config S3C64XX_SETUP_USB_PHY
bool
@@ -109,7 +109,7 @@ config S3C64XX_SETUP_USB_PHY
# S36400 Macchine support

config MACH_SMDK6400
- bool "SMDK6400"
+ bool "SMDK6400"
depends on ATAGS
select CPU_S3C6400
select S3C64XX_SETUP_SDHCI
@@ -200,7 +200,7 @@ config SMDK6410_SD_CH0
bool "Use channel 0 only"
depends on MACH_SMDK6410
help
- Select CON7 (channel 0) as the MMC/SD slot, as
+ Select CON7 (channel 0) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
@@ -209,7 +209,7 @@ config SMDK6410_SD_CH1
bool "Use channel 1 only"
depends on MACH_SMDK6410
help
- Select CON6 (channel 1) as the MMC/SD slot, as
+ Select CON6 (channel 1) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
@@ -255,7 +255,7 @@ config MACH_NCP
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
help
- Machine support for the Samsung NCP
+ Machine support for the Samsung NCP

config MACH_HMT
bool "Airgoo HMT"
@@ -287,21 +287,21 @@ config MACH_SMARTQ
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
help
- Shared machine support for SmartQ 5/7
+ Shared machine support for SmartQ 5/7

config MACH_SMARTQ5
bool "SmartQ 5"
depends on ATAGS
select MACH_SMARTQ
help
- Machine support for the SmartQ 5
+ Machine support for the SmartQ 5

config MACH_SMARTQ7
bool "SmartQ 7"
depends on ATAGS
select MACH_SMARTQ
help
- Machine support for the SmartQ 7
+ Machine support for the SmartQ 7

config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"