[PATCH V4 4/4] video: exynos_dp: Use the generic PHY driver

[jg1.han@samsung.com (Jingoo Han)]

Use the generic PHY API instead of the platform callback to control
the DP PHY.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
 .../devicetree/bindings/video/exynos_dp.txt        |   23 +++++---------------
 drivers/video/exynos/exynos_dp_core.c              |   16 ++++++++++----
 drivers/video/exynos/exynos_dp_core.h              |    2 ++
 3 files changed, 20 insertions(+), 21 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 84f10c1..022f4b6 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -1,17 +1,6 @@
 The Exynos display port interface should be configured based on
 the type of panel connected to it.
 
-We use two nodes:
-	-dp-controller node
-	-dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy:
-	-reg:
-		Base address of DP PHY register.
-	-samsung,enable-mask:
-		The bit-mask used to enable/disable DP PHY.
-
 For the Panel initialization, we read data from dp-controller node.
 Required properties for dp-controller:
 	-compatible:
@@ -25,6 +14,10 @@ Required properties for dp-controller:
 		from common clock binding: handle to dp clock.
 	-clock-names:
 		from common clock binding: Shall be "dp".
+	-phys:
+		from general PHY binding: the phandle for the PHY device.
+	-phy-names:
+		from general PHY binding: Should be "dp".
 	-interrupt-parent:
 		phandle to Interrupt combiner node.
 	-samsung,color-space:
@@ -67,12 +60,8 @@ SOC specific portion:
 		interrupt-parent = <&combiner>;
 		clocks = <&clock 342>;
 		clock-names = "dp";
-
-		dptx-phy {
-			reg = <0x10040720>;
-			samsung,enable-mask = <1>;
-		};
-
+		phys = <&dp_phy>;
+		phy-names = "dp";
 	};
 
 Board Specific portion:
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 05fed7d..5e1a715 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 
 #include "exynos_dp_core.h"
 
@@ -960,8 +961,11 @@ static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
 
 	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
 	if (!dp_phy_node) {
-		dev_err(dp->dev, "could not find dptx-phy node\n");
-		return -ENODEV;
+		dp->phy = devm_phy_get(dp->dev, "dp");
+		if (IS_ERR(dp->phy))
+			return PTR_ERR(dp->phy);
+		else
+			return 0;
 	}
 
 	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
@@ -992,7 +996,9 @@ err:
 
 static void exynos_dp_phy_init(struct exynos_dp_device *dp)
 {
-	if (dp->phy_addr) {
+	if (dp->phy) {
+		phy_power_on(dp->phy);
+	} else if (dp->phy_addr) {
 		u32 reg;
 
 		reg = __raw_readl(dp->phy_addr);
@@ -1003,7 +1009,9 @@ static void exynos_dp_phy_init(struct exynos_dp_device *dp)
 
 static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
 {
-	if (dp->phy_addr) {
+	if (dp->phy) {
+		phy_power_off(dp->phy);
+	} else if (dp->phy_addr) {
 		u32 reg;
 
 		reg = __raw_readl(dp->phy_addr);
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 56cfec8..87804b6 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -151,6 +151,8 @@ struct exynos_dp_device {
 	struct video_info	*video_info;
 	struct link_train	link_train;
 	struct work_struct	hotplug_work;
+
+	struct phy		*phy;
 };
 
 /* exynos_dp_reg.c */
-- 
1.7.10.4