[PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command

[boojin.kim@samsung.com (Boojin Kim)]

Jassi Brar wrote:
> Sent: Friday, July 22, 2011 2:42 PM
> To: Boojin Kim
> Cc: linux-arm-kernel at lists.infradead.org; linux-samsung-soc at vger.kernel.org;
> Vinod Koul; Dan Williams; Kukjin Kim
> Subject: Re: [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command
>
> On Wed, Jul 20, 2011 at 4:16 PM, Boojin Kim <boojin.kim@samsung.com> wrote:
> > Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> > ---
> >  drivers/dma/pl330.c |   53 
> > +++++++++++++++++++++++++++++++++++++----------
> ---
> >  1 files changed, 39 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> > index 586ab39..880f010 100644
> > --- a/drivers/dma/pl330.c
> > +++ b/drivers/dma/pl330.c
> > @@ -256,25 +256,50 @@ static int pl330_alloc_chan_resources(struct 
> > dma_chan
> *chan)
> >  static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
> unsigned long arg)
> >  {
> >        struct dma_pl330_chan *pch = to_pchan(chan);
> > -       struct dma_pl330_desc *desc;
> > +       struct dma_pl330_desc *desc, *_dt;
> >        unsigned long flags;
> > +       struct dma_pl330_dmac *pdmac = pch->dmac;
> > +       struct dma_slave_config *slave_config;
> > +       struct dma_pl330_peri *peri;
> > +       LIST_HEAD(list);
> >
> > -       /* Only supports DMA_TERMINATE_ALL */
> > -       if (cmd != DMA_TERMINATE_ALL)
> > -               return -ENXIO;
> > -
> > -       spin_lock_irqsave(&pch->lock, flags);
> > -
> > -       /* FLUSH the PL330 Channel thread */
> > -       pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
> > +       switch (cmd) {
> > +       case DMA_TERMINATE_ALL:
> > +               spin_lock_irqsave(&pch->lock, flags);
> >
> > -       /* Mark all desc done */
> > -       list_for_each_entry(desc, &pch->work_list, node)
> > -               desc->status = DONE;
> > +               /* FLUSH the PL330 Channel thread */
> > +               pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
> >
> > -       spin_unlock_irqrestore(&pch->lock, flags);
> > +               /* Mark all desc done */
> > +               list_for_each_entry_safe(desc, _dt, &pch->work_list , 
> > node)
> {
> > +                       desc->status = DONE;
> > +                       pch->completed = desc->txd.cookie;
> > +                       list_move_tail(&desc->node, &list);
> > +               }
> >
> > -       pl330_tasklet((unsigned long) pch);
> > +               list_splice_tail_init(&list, &pdmac->desc_pool);
> > +               spin_unlock_irqrestore(&pch->lock, flags);
> > +               break;
> > +       case DMA_SLAVE_CONFIG:
> > +               slave_config = (struct dma_slave_config *)arg;
> > +               peri = pch->chan.private;
> > +
> > +               if (slave_config->direction == DMA_TO_DEVICE) {
> > +                       if (slave_config->dst_addr)
> > +                               peri->fifo_addr = slave_config->dst_addr;
> > +                       if (slave_config->dst_addr_width)
> > +                               peri->burst_sz = __ffs(slave_config-
> >dst_addr_width);
> > +               } else if (slave_config->direction == DMA_FROM_DEVICE) {
> > +                       if (slave_config->src_addr)
> > +                               peri->fifo_addr = slave_config->src_addr;
> > +                       if (slave_config->src_addr_width)
> > +                               peri->burst_sz = __ffs(slave_config-
> >src_addr_width);
> > +               }
> > +               break;
>    As discussed yesterday, DMA_SLAVE_CONFIG is assumed to be madatory,
> so please dismantle the 'struct dma_pl330_peri', move fifo_addr,
> burst_sz and rqtype
> to 'struct dma_pl330_chan' and poison them - that will force clients
> to do DMA_SLAVE_CONFIG. Move 'peri_id' to 'struct dma_pl330_platdata'
>   And protect the changes to channel parameters with lock.

It's fine that you understand my implementation.
I'm agree to remove unnecessary structure.
But, this item should bring the change of all DMA machine code and doesn't has 
deeply relationship with the purpose of this patch series (samsung dma usage).
So, I'd like to make it to another patch and submit it.
How about my opinion ?