From: sbkim73@samsung.com (Sangbeom Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 1/3] ARM: S5P: Add s5p_timer support for HRT
Date: Fri, 04 Mar 2011 16:06:34 +0900 [thread overview]
Message-ID: <002501cbda3a$b6f37d00$24da7700$@com> (raw)
In-Reply-To: <AANLkTikywhikDP1a4cMb=SYDhVROn_mk+zkHVLcg92T+@mail.gmail.com>
Hi Kyungmin!
I'm sorry, I don't test on exynos4 configuration.
I will add S5P_HRT configuration in plat-s5p Kconfig.
And It can be selected on each machine.
After testing it, I will submit again.
Thanks,
S.B. Kim
> On Friday, March 04, 2011 3:32 PM, Kyungmin Park <kmpark@samsung.com>
wrote:
> > This patch adds support HR-Timer(High Resolution Timer) and dynamic
> > tick system for S5P SoCs. There are many clock sources for HR-Timer
> > on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used
> > for clock source.
> > This patch can only support PWM timer for clocksource of
> > S5P64x0 and S5PV210.
> >
> > Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
> > ---
> > ?arch/arm/plat-s5p/Makefile ? ? ? ? ? ? ? ?| ? ?1 +
> > ?arch/arm/plat-s5p/include/plat/s5p-time.h | ? 40 +++
> > ?arch/arm/plat-s5p/s5p-time.c ? ? ? ? ? ? ?| ?452
> +++++++++++++++++++++++++++++
> > ?3 files changed, 493 insertions(+), 0 deletions(-)
> > ?create mode 100644 arch/arm/plat-s5p/include/plat/s5p-time.h
> > ?create mode 100644 arch/arm/plat-s5p/s5p-time.c
> >
> > diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
> > index 4bd5cf9..3b8cc2f 100644
> > --- a/arch/arm/plat-s5p/Makefile
> > +++ b/arch/arm/plat-s5p/Makefile
> > @@ -22,6 +22,7 @@ obj-$(CONFIG_S5P_GPIO_INT) ? ?+= irq-gpioint.o
> > ?obj-$(CONFIG_S5P_SYSTEM_MMU) ? += sysmmu.o
> > ?obj-$(CONFIG_PM) ? ? ? ? ? ? ? += pm.o
> > ?obj-$(CONFIG_PM) ? ? ? ? ? ? ? += irq-pm.o
> > +obj-$(CONFIG_GENERIC_CLOCKEVENTS) += s5p-time.o
>
> Do you test it with exynos4 configuration? it's affect the exynos compile.
> First select SAMSUNG_DEV_PWM, it can't compile it since no
> init_sched_clock
> Second select HAVE_SCHED_CLOCK, it can't boot.
>
> I used the for-exynos4 branch.
>
> Thank you,
> Kyungmin Park
> >
> > ?# devices
> >
> > diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-
> s5p/include/plat/s5p-time.h
> > new file mode 100644
> > index 0000000..9956136
> > --- /dev/null
> > +++ b/arch/arm/plat-s5p/include/plat/s5p-time.h
> > @@ -0,0 +1,40 @@
> > +/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h
> > + *
> > + * Copyright 2011 Samsung Electronics Co., Ltd.
> > + * ? ? ? ? ? ? http://www.samsung.com/
> > + *
> > + * Header file for s5p time support
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > +*/
> > +
> > +#ifndef __ASM_PLAT_S5P_TIME_H
> > +#define __ASM_PLAT_S5P_TIME_H __FILE__
> > +
> > +/* S5P HR-Timer Clock mode */
> > +enum s5p_timer_mode {
> > + ? ? ? S5P_PWM0,
> > + ? ? ? S5P_PWM1,
> > + ? ? ? S5P_PWM2,
> > + ? ? ? S5P_PWM3,
> > + ? ? ? S5P_PWM4,
> > +};
> > +
> > +struct s5p_timer_source {
> > + ? ? ? unsigned int event_id;
> > + ? ? ? unsigned int source_id;
> > +};
> > +
> > +/* Be able to sleep for atleast 4 seconds (usually more) */
> > +#define S5PTIMER_MIN_RANGE ? ? 4
> > +
> > +#define TCNT_MAX ? ? ? ? ? ? ? 0xffffffff
> > +#define NON_PERIODIC ? ? ? ? ? 0
> > +#define PERIODIC ? ? ? ? ? ? ? 1
> > +
> > +extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? enum s5p_timer_mode source);
> > +extern struct sys_timer s5p_timer;
> > +#endif /* __ASM_PLAT_S5P_TIME_H */
> > diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c
> > new file mode 100644
> > index 0000000..1d2447e
> > --- /dev/null
> > +++ b/arch/arm/plat-s5p/s5p-time.c
> > @@ -0,0 +1,452 @@
> > +/* linux/arch/arm/plat-s5p/s5p-time.c
> > + *
> > + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> > + * ? ? ? ? ? ? http://www.samsung.com/
> > + *
> > + * S5P - Common hr-timer support
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > +*/
> > +
> > +#include <linux/sched.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/irq.h>
> > +#include <linux/err.h>
> > +#include <linux/clk.h>
> > +#include <linux/clockchips.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include <asm/smp_twd.h>
> > +#include <asm/mach/time.h>
> > +#include <asm/mach/arch.h>
> > +#include <asm/mach/map.h>
> > +#include <asm/sched_clock.h>
> > +
> > +#include <mach/map.h>
> > +#include <plat/devs.h>
> > +#include <plat/regs-timer.h>
> > +#include <plat/s5p-time.h>
> > +
> > +static struct clk *tin_event;
> > +static struct clk *tin_source;
> > +static struct clk *tdiv_event;
> > +static struct clk *tdiv_source;
> > +static struct clk *timerclk;
> > +static struct s5p_timer_source timer_source;
> > +static unsigned long clock_count_per_tick;
> > +static void s5p_timer_resume(void);
> > +
> > +static void s5p_time_stop(enum s5p_timer_mode mode)
> > +{
> > + ? ? ? unsigned long tcon;
> > +
> > + ? ? ? tcon = __raw_readl(S3C2410_TCON);
> > +
> > + ? ? ? switch (mode) {
> > + ? ? ? case S5P_PWM0:
> > + ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T0START;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM1:
> > + ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T1START;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM2:
> > + ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T2START;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM3:
> > + ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T3START;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM4:
> > + ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T4START;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? default:
> > + ? ? ? ? ? ? ? printk(KERN_ERR "Invalid Timer %d\n", mode);
> > + ? ? ? ? ? ? ? break;
> > + ? ? ? }
> > + ? ? ? __raw_writel(tcon, S3C2410_TCON);
> > +}
> > +
> > +static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long
tcnt)
> > +{
> > + ? ? ? unsigned long tcon;
> > +
> > + ? ? ? tcon = __raw_readl(S3C2410_TCON);
> > +
> > + ? ? ? tcnt--;
> > +
> > + ? ? ? switch (mode) {
> > + ? ? ? case S5P_PWM0:
> > + ? ? ? ? ? ? ? tcon &= ~(0x0f << 0);
> > + ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T0MANUALUPD;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM1:
> > + ? ? ? ? ? ? ? tcon &= ~(0x0f << 8);
> > + ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T1MANUALUPD;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM2:
> > + ? ? ? ? ? ? ? tcon &= ~(0x0f << 12);
> > + ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T2MANUALUPD;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM3:
> > + ? ? ? ? ? ? ? tcon &= ~(0x0f << 16);
> > + ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T3MANUALUPD;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM4:
> > + ? ? ? ? ? ? ? tcon &= ~(0x07 << 20);
> > + ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T4MANUALUPD;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? default:
> > + ? ? ? ? ? ? ? printk(KERN_ERR "Invalid Timer %d\n", mode);
> > + ? ? ? ? ? ? ? break;
> > + ? ? ? }
> > +
> > + ? ? ? __raw_writel(tcnt, S3C2410_TCNTB(mode));
> > + ? ? ? __raw_writel(tcnt, S3C2410_TCMPB(mode));
> > + ? ? ? __raw_writel(tcon, S3C2410_TCON);
> > +}
> > +
> > +static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
> > +{
> > + ? ? ? unsigned long tcon;
> > +
> > + ? ? ? tcon ?= __raw_readl(S3C2410_TCON);
> > +
> > + ? ? ? switch (mode) {
> > + ? ? ? case S5P_PWM0:
> > + ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T0START;
> > + ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T0MANUALUPD;
> > +
> > + ? ? ? ? ? ? ? if (periodic)
> > + ? ? ? ? ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T0RELOAD;
> > + ? ? ? ? ? ? ? else
> > + ? ? ? ? ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T0RELOAD;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM1:
> > + ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T1START;
> > + ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T1MANUALUPD;
> > +
> > + ? ? ? ? ? ? ? if (periodic)
> > + ? ? ? ? ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T1RELOAD;
> > + ? ? ? ? ? ? ? else
> > + ? ? ? ? ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T1RELOAD;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM2:
> > + ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T2START;
> > + ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T2MANUALUPD;
> > +
> > + ? ? ? ? ? ? ? if (periodic)
> > + ? ? ? ? ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T2RELOAD;
> > + ? ? ? ? ? ? ? else
> > + ? ? ? ? ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T2RELOAD;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM3:
> > + ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T3START;
> > + ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T3MANUALUPD;
> > +
> > + ? ? ? ? ? ? ? if (periodic)
> > + ? ? ? ? ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T3RELOAD;
> > + ? ? ? ? ? ? ? else
> > + ? ? ? ? ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T3RELOAD;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM4:
> > + ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T4START;
> > + ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T4MANUALUPD;
> > +
> > + ? ? ? ? ? ? ? if (periodic)
> > + ? ? ? ? ? ? ? ? ? ? ? tcon |= S3C2410_TCON_T4RELOAD;
> > + ? ? ? ? ? ? ? else
> > + ? ? ? ? ? ? ? ? ? ? ? tcon &= ~S3C2410_TCON_T4RELOAD;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? default:
> > + ? ? ? ? ? ? ? printk(KERN_ERR "Invalid Timer %d\n", mode);
> > + ? ? ? ? ? ? ? break;
> > + ? ? ? }
> > + ? ? ? __raw_writel(tcon, S3C2410_TCON);
> > +}
> > +
> > +static int s5p_set_next_event(unsigned long cycles,
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? struct clock_event_device *evt)
> > +{
> > + ? ? ? s5p_time_setup(timer_source.event_id, cycles);
> > + ? ? ? s5p_time_start(timer_source.event_id, NON_PERIODIC);
> > +
> > + ? ? ? return 0;
> > +}
> > +
> > +static void s5p_set_mode(enum clock_event_mode mode,
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? struct clock_event_device *evt)
> > +{
> > + ? ? ? s5p_time_stop(timer_source.event_id);
> > +
> > + ? ? ? switch (mode) {
> > + ? ? ? case CLOCK_EVT_MODE_PERIODIC:
> > + ? ? ? ? ? ? ? s5p_time_setup(timer_source.event_id,
> clock_count_per_tick);
> > + ? ? ? ? ? ? ? s5p_time_start(timer_source.event_id, PERIODIC);
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case CLOCK_EVT_MODE_ONESHOT:
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case CLOCK_EVT_MODE_UNUSED:
> > + ? ? ? case CLOCK_EVT_MODE_SHUTDOWN:
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case CLOCK_EVT_MODE_RESUME:
> > + ? ? ? ? ? ? ? s5p_timer_resume();
> > + ? ? ? ? ? ? ? break;
> > + ? ? ? }
> > +}
> > +
> > +static void s5p_timer_resume(void)
> > +{
> > + ? ? ? /* event timer restart */
> > + ? ? ? s5p_time_setup(timer_source.event_id, clock_count_per_tick);
> > + ? ? ? s5p_time_start(timer_source.event_id, PERIODIC);
> > +
> > + ? ? ? /* source timer restart */
> > + ? ? ? s5p_time_setup(timer_source.source_id, TCNT_MAX);
> > + ? ? ? s5p_time_start(timer_source.source_id, PERIODIC);
> > +}
> > +
> > +void __init s5p_set_timer_source(enum s5p_timer_mode event,
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?enum s5p_timer_mode source)
> > +{
> > + ? ? ? s3c_device_timer[event].dev.bus = &platform_bus_type;
> > + ? ? ? s3c_device_timer[source].dev.bus = &platform_bus_type;
> > +
> > + ? ? ? timer_source.event_id = event;
> > + ? ? ? timer_source.source_id = source;
> > +}
> > +
> > +static struct clock_event_device time_event_device = {
> > + ? ? ? .name ? ? ? ? ? = "s5p_event_timer",
> > + ? ? ? .features ? ? ? = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
> > + ? ? ? .rating ? ? ? ? = 200,
> > + ? ? ? .shift ? ? ? ? ?= 32,
> > + ? ? ? .set_next_event = s5p_set_next_event,
> > + ? ? ? .set_mode ? ? ? = s5p_set_mode,
> > +};
> > +
> > +static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
> > +{
> > + ? ? ? struct clock_event_device *evt = dev_id;
> > +
> > + ? ? ? evt->event_handler(evt);
> > +
> > + ? ? ? return IRQ_HANDLED;
> > +}
> > +
> > +static struct irqaction s5p_clock_event_irq = {
> > + ? ? ? .name ? ? ? ? ? = "s5p_time_irq",
> > + ? ? ? .flags ? ? ? ? ?= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
> > + ? ? ? .handler ? ? ? ?= s5p_clock_event_isr,
> > + ? ? ? .dev_id ? ? ? ? = &time_event_device,
> > +};
> > +
> > +static void __init s5p_clockevent_init(void)
> > +{
> > + ? ? ? unsigned long pclk;
> > + ? ? ? unsigned long clock_rate;
> > + ? ? ? unsigned int irq_number;
> > + ? ? ? struct clk *tscaler;
> > +
> > + ? ? ? pclk = clk_get_rate(timerclk);
> > +
> > + ? ? ? tscaler = clk_get_parent(tdiv_event);
> > +
> > + ? ? ? clk_set_rate(tscaler, pclk / 2);
> > + ? ? ? clk_set_rate(tdiv_event, pclk / 2);
> > + ? ? ? clk_set_parent(tin_event, tdiv_event);
> > +
> > + ? ? ? clock_rate = clk_get_rate(tin_event);
> > + ? ? ? clock_count_per_tick = clock_rate / HZ;
> > +
> > + ? ? ? clockevents_calc_mult_shift(&time_event_device,
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? clock_rate, S5PTIMER_MIN_RANGE);
> > + ? ? ? time_event_device.max_delta_ns =
> > + ? ? ? ? ? ? ? clockevent_delta2ns(-1, &time_event_device);
> > + ? ? ? time_event_device.min_delta_ns =
> > + ? ? ? ? ? ? ? clockevent_delta2ns(1, &time_event_device);
> > +
> > + ? ? ? time_event_device.cpumask = cpumask_of(0);
> > + ? ? ? clockevents_register_device(&time_event_device);
> > +
> > + ? ? ? irq_number = timer_source.event_id + IRQ_TIMER0;
> > + ? ? ? setup_irq(irq_number, &s5p_clock_event_irq);
> > +}
> > +
> > +static cycle_t s5p_timer_read(struct clocksource *cs)
> > +{
> > + ? ? ? unsigned long offset = 0;
> > +
> > + ? ? ? switch (timer_source.source_id) {
> > + ? ? ? case S5P_PWM0:
> > + ? ? ? case S5P_PWM1:
> > + ? ? ? case S5P_PWM2:
> > + ? ? ? case S5P_PWM3:
> > + ? ? ? ? ? ? ? offset = (timer_source.source_id * 0x0c) + 0x14;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM4:
> > + ? ? ? ? ? ? ? offset = 0x40;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? default:
> > + ? ? ? ? ? ? ? printk(KERN_ERR "Invalid Timer %d\n",
> timer_source.source_id);
> > + ? ? ? ? ? ? ? return 0;
> > + ? ? ? }
> > +
> > + ? ? ? return (cycle_t) ~__raw_readl(S3C_TIMERREG(offset));
> > +}
> > +
> > +/*
> > + * Override the global weak sched_clock symbol with this
> > + * local implementation which uses the clocksource to get some
> > + * better resolution when scheduling the kernel. We accept that
> > + * this wraps around for now, since it is just a relative time
> > + * stamp. (Inspired by U300 implementation.)
> > + */
> > +static DEFINE_CLOCK_DATA(cd);
> > +
> > +unsigned long long notrace sched_clock(void)
> > +{
> > + ? ? ? u32 cyc;
> > + ? ? ? unsigned long offset = 0;
> > +
> > + ? ? ? switch (timer_source.source_id) {
> > + ? ? ? case S5P_PWM0:
> > + ? ? ? case S5P_PWM1:
> > + ? ? ? case S5P_PWM2:
> > + ? ? ? case S5P_PWM3:
> > + ? ? ? ? ? ? ? offset = (timer_source.source_id * 0x0c) + 0x14;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM4:
> > + ? ? ? ? ? ? ? offset = 0x40;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? default:
> > + ? ? ? ? ? ? ? printk(KERN_ERR "Invalid Timer %d\n",
> timer_source.source_id);
> > + ? ? ? ? ? ? ? return 0;
> > + ? ? ? }
> > +
> > + ? ? ? cyc = ~__raw_readl(S3C_TIMERREG(offset));
> > + ? ? ? return cyc_to_sched_clock(&cd, cyc, (u32)~0);
> > +}
> > +
> > +static void notrace s5p_update_sched_clock(void)
> > +{
> > + ? ? ? u32 cyc;
> > + ? ? ? unsigned long offset = 0;
> > +
> > + ? ? ? switch (timer_source.source_id) {
> > + ? ? ? case S5P_PWM0:
> > + ? ? ? case S5P_PWM1:
> > + ? ? ? case S5P_PWM2:
> > + ? ? ? case S5P_PWM3:
> > + ? ? ? ? ? ? ? offset = (timer_source.source_id * 0x0c) + 0x14;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? case S5P_PWM4:
> > + ? ? ? ? ? ? ? offset = 0x40;
> > + ? ? ? ? ? ? ? break;
> > +
> > + ? ? ? default:
> > + ? ? ? ? ? ? ? printk(KERN_ERR "Invalid Timer %d\n",
> timer_source.source_id);
> > + ? ? ? }
> > +
> > + ? ? ? cyc = ~__raw_readl(S3C_TIMERREG(offset));
> > + ? ? ? update_sched_clock(&cd, cyc, (u32)~0);
> > +}
> > +
> > +struct clocksource time_clocksource = {
> > + ? ? ? .name ? ? ? ? ? = "s5p_clocksource_timer",
> > + ? ? ? .rating ? ? ? ? = 250,
> > + ? ? ? .read ? ? ? ? ? = s5p_timer_read,
> > + ? ? ? .mask ? ? ? ? ? = CLOCKSOURCE_MASK(32),
> > + ? ? ? .flags ? ? ? ? ?= CLOCK_SOURCE_IS_CONTINUOUS,
> > +};
> > +
> > +static void __init s5p_clocksource_init(void)
> > +{
> > + ? ? ? unsigned long pclk;
> > + ? ? ? unsigned long clock_rate;
> > +
> > + ? ? ? pclk = clk_get_rate(timerclk);
> > +
> > + ? ? ? clk_set_rate(tdiv_source, pclk / 2);
> > + ? ? ? clk_set_parent(tin_source, tdiv_source);
> > +
> > + ? ? ? clock_rate = clk_get_rate(tin_source);
> > +
> > + ? ? ? init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
> > +
> > + ? ? ? s5p_time_setup(timer_source.source_id, TCNT_MAX);
> > + ? ? ? s5p_time_start(timer_source.source_id, PERIODIC);
> > +
> > + ? ? ? if (clocksource_register_hz(&time_clocksource, clock_rate))
> > + ? ? ? ? ? ? ? panic("%s: can't register clocksource\n",
> time_clocksource.name);
> > +}
> > +
> > +static void __init s5p_timer_resources(void)
> > +{
> > +
> > + ? ? ? unsigned long event_id = timer_source.event_id;
> > + ? ? ? unsigned long source_id = timer_source.source_id;
> > +
> > + ? ? ? timerclk = clk_get(NULL, "timers");
> > +
> > + ? ? ? clk_enable(timerclk);
> > +
> > + ? ? ? if (IS_ERR(timerclk))
> > + ? ? ? ? ? ? ? panic("failed to get timers clock for timer");
> > +
> > + ? ? ? tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
> > +
> > + ? ? ? if (IS_ERR(tin_event))
> > + ? ? ? ? ? ? ? panic("failed to get pwm-tin clock for event timer");
> > +
> > + ? ? ? tdiv_event = clk_get(&s3c_device_timer[event_id].dev,
"pwm-tdiv");
> > +
> > + ? ? ? if (IS_ERR(tdiv_event))
> > + ? ? ? ? ? ? ? panic("failed to get pwm-tdiv clock for event timer");
> > +
> > + ? ? ? clk_enable(tin_event);
> > +
> > + ? ? ? tin_source = clk_get(&s3c_device_timer[source_id].dev,
"pwm-tin");
> > + ? ? ? if (IS_ERR(tin_source))
> > + ? ? ? ? ? ? ? panic("failed to get pwm-tin clock for source timer");
> > +
> > + ? ? ? tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-
> tdiv");
> > + ? ? ? if (IS_ERR(tdiv_source))
> > + ? ? ? ? ? ? ? panic("failed to get pwm-tdiv clock for source timer");
> > +
> > + ? ? ? clk_enable(tin_source);
> > +}
> > +
> > +static void __init s5p_timer_init(void)
> > +{
> > + ? ? ? s5p_timer_resources();
> > + ? ? ? s5p_clockevent_init();
> > + ? ? ? s5p_clocksource_init();
> > +}
> > +
> > +struct sys_timer s5p_timer = {
> > + ? ? ? .init ? ? ? ? ? = s5p_timer_init,
> > +};
> > --
> > 1.7.1
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-samsung-
> soc" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at ?http://vger.kernel.org/majordomo-info.html
> >
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2011-03-04 7:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-04 5:21 [PATCH V2 0/3] ARM: S5P: Add HRT support for s5p series Sangbeom Kim
2011-03-04 5:21 ` [PATCH V2 1/3] ARM: S5P: Add s5p_timer support for HRT Sangbeom Kim
2011-03-04 6:31 ` Kyungmin Park
2011-03-04 7:06 ` Sangbeom Kim [this message]
2011-03-04 5:21 ` [PATCH V2 2/3] ARM: S5P: Update machine initialization " Sangbeom Kim
2011-03-04 5:21 ` [PATCH V2 3/3] ARM: S5P: Update defconfig for HRT support Sangbeom Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002501cbda3a$b6f37d00$24da7700$@com' \
--to=sbkim73@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).