[PATCH] ARM: EXYNOS4: Adds Samsung NURI board support

[kgene.kim@samsung.com (Kukjin Kim)]

Kukjin Kim wrote:
> 
> Minkyu Kang wrote:
> >
> > Dear Kukjin Kim,
> >
> > 2011-02-28 ?? 4:42, Kukjin Kim ? ?:
> > > Minkyu Kang wrote:
> > >>
> > >> This patch adds Samsung NURI board support.
> > >>
> > >> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
> > >> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> > >> ---
> > >> This patch is base on next-exynos4 branch at kgene tree.
> > >>
> > >>  arch/arm/configs/exynos4_defconfig |    1 +
> > >>  arch/arm/mach-exynos4/Kconfig      |   15 +++
> > >>  arch/arm/mach-exynos4/Makefile     |    1 +
> > >>  arch/arm/mach-exynos4/mach-nuri.c  |  233
> > >> ++++++++++++++++++++++++++++++++++++
> > >>  4 files changed, 250 insertions(+), 0 deletions(-)
> > >>  create mode 100644 arch/arm/mach-exynos4/mach-nuri.c
> > >>
> > >
> > >> +enum fixed_regulator_id {
> > >> +	FIXED_REG_ID_MMC = 0,
> > >
> > > 	FIXED_REG_ID_MMC,
> > >
> > > (snip)
> > >
> > >> +static struct platform_device emmc_fixed_voltage = {
> > >> +	.name			= "reg-fixed-voltage",
> > >> +	.id			= FIXED_REG_ID_MMC,
> > >
> > > Is there any reason to use FIXED_REG_ID_MMC instead directly id 0?
> > >
> >
> > I'm going to add more IDs of fixed regulator that are LCD and Backlight,
> and
> > so on.
> > So use enum values for avoid the hard coding.
> >
> 
> Ok, applied this after removing "ifdef WATCHDOG".

Oops, NURI board is not registered yet :(
So can't merge this before updating it now.
Or should drop update defconfig from this...

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.