linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: perf: reset counters on all CPUs during initialisation
Date: Thu, 24 Mar 2011 16:22:24 -0000	[thread overview]
Message-ID: <003b01cbea3f$a93fc8c0$fbbf5a40$@deacon@arm.com> (raw)
In-Reply-To: <1300895204-10544-1-git-send-email-will.deacon@arm.com>

> ARMv7 dictates that the interrupt-enable and count-enable registers for
> each PMU counter are UNKNOWN following core reset.
> 
> This patch adds a new (optional) function pointer to struct arm_pmu for
> resetting the PMU state during init. The reset function is called on
> each CPU via an arch_initcall in the generic ARM perf_event code and
> allows the PMU backend to write sane values to any UNKNOWN registers.
> 
> Cc: Jean Pihet <jean.pihet@ti.com>
> Signed-off-by: Will Deacon <will.deacon@arm.com>
> ---
> 
> Hi Jean, here's the updated patch following the discussion on the list.
> 
> Please let me know what you think.
> 
> Will

Resending with correct email address for Jean...
 
>  arch/arm/kernel/perf_event.c    |   14 ++++++++++++++
>  arch/arm/kernel/perf_event_v7.c |   22 ++++++++++++++++------
>  2 files changed, 30 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
> index 53f6068..b23a364 100644
> --- a/arch/arm/kernel/perf_event.c
> +++ b/arch/arm/kernel/perf_event.c
> @@ -79,6 +79,7 @@ struct arm_pmu {
>  	void		(*write_counter)(int idx, u32 val);
>  	void		(*start)(void);
>  	void		(*stop)(void);
> +	void		(*reset)(void *);
>  	const unsigned	(*cache_map)[PERF_COUNT_HW_CACHE_MAX]
>  				    [PERF_COUNT_HW_CACHE_OP_MAX]
>  				    [PERF_COUNT_HW_CACHE_RESULT_MAX];
> @@ -612,6 +613,19 @@ static struct pmu pmu = {
>  #include "perf_event_v6.c"
>  #include "perf_event_v7.c"
> 
> +/*
> + * Ensure the PMU has sane values out of reset.
> + * This requires SMP to be available, so exists as a separate initcall.
> + */
> +static int __init
> +armpmu_reset(void)
> +{
> +	if (armpmu && armpmu->reset)
> +		return on_each_cpu(armpmu->reset, NULL, 1);
> +	return 0;
> +}
> +arch_initcall(armpmu_reset);
> +
>  static int __init
>  init_hw_perf_events(void)
>  {
> diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
> index 2aa83c2..4960686 100644
> --- a/arch/arm/kernel/perf_event_v7.c
> +++ b/arch/arm/kernel/perf_event_v7.c
> @@ -849,6 +849,18 @@ static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
>  	}
>  }
> 
> +static void armv7pmu_reset(void *info)
> +{
> +	u32 idx, nb_cnt = armpmu->num_events;
> +
> +	/* The counter and interrupt enable registers are unknown at reset. */
> +	for (idx = 1; idx < nb_cnt; ++idx)
> +		armv7pmu_disable_event(NULL, idx);
> +
> +	/* Initialize & Reset PMNC: C and P bits */
> +	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
> +}
> +
>  static struct arm_pmu armv7pmu = {
>  	.handle_irq		= armv7pmu_handle_irq,
>  	.enable			= armv7pmu_enable_event,
> @@ -858,17 +870,15 @@ static struct arm_pmu armv7pmu = {
>  	.get_event_idx		= armv7pmu_get_event_idx,
>  	.start			= armv7pmu_start,
>  	.stop			= armv7pmu_stop,
> +	.reset			= armv7pmu_reset,
>  	.raw_event_mask		= 0xFF,
>  	.max_period		= (1LLU << 32) - 1,
>  };
> 
> -static u32 __init armv7_reset_read_pmnc(void)
> +static u32 __init armv7_read_num_pmnc_events(void)
>  {
>  	u32 nb_cnt;
> 
> -	/* Initialize & Reset PMNC: C and P bits */
> -	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
> -
>  	/* Read the nb of CNTx counters supported from PMNC */
>  	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
> 
> @@ -882,7 +892,7 @@ static const struct arm_pmu *__init armv7_a8_pmu_init(void)
>  	armv7pmu.name		= "ARMv7 Cortex-A8";
>  	armv7pmu.cache_map	= &armv7_a8_perf_cache_map;
>  	armv7pmu.event_map	= &armv7_a8_perf_map;
> -	armv7pmu.num_events	= armv7_reset_read_pmnc();
> +	armv7pmu.num_events	= armv7_read_num_pmnc_events();
>  	return &armv7pmu;
>  }
> 
> @@ -892,7 +902,7 @@ static const struct arm_pmu *__init armv7_a9_pmu_init(void)
>  	armv7pmu.name		= "ARMv7 Cortex-A9";
>  	armv7pmu.cache_map	= &armv7_a9_perf_cache_map;
>  	armv7pmu.event_map	= &armv7_a9_perf_map;
> -	armv7pmu.num_events	= armv7_reset_read_pmnc();
> +	armv7pmu.num_events	= armv7_read_num_pmnc_events();
>  	return &armv7pmu;
>  }
>  #else
> --
> 1.7.0.4

  reply	other threads:[~2011-03-24 16:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-23 15:46 [PATCH v2] ARM: perf: reset counters on all CPUs during initialisation Will Deacon
2011-03-24 16:22 ` Will Deacon [this message]
     [not found] ` <-978680943347076223@unknownmsgid>
2011-03-25 10:10   ` Jean Pihet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='003b01cbea3f$a93fc8c0$fbbf5a40$@deacon@arm.com' \
    --to=will.deacon@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).