[PATCH] ARM: SAMSUNG: Add support for pre-sleep/post-restore gpio control

[m.szyprowski@samsung.com (Marek Szyprowski)]

Hello,

On Friday, May 06, 2011 7:03 AM Kukjin Kim wrote:

> Mark Brown wrote:
> >
> > From: Ben Dooks <ben-linux@fluff.org>
> >
> > Add a callback so that per-arch can do pre-sleep and post-resume
> > gpio configuration so that for the S3C64XX, the GPIO configuration
> > is restored before the sleep mode is cleared.
> >
> > For the S3C64XX case, it means that the GPIOs get set back to normal
> > operation after the restore code puts the original configurations
> > back in after the
> >
> > Signed-off-by: Ben Dooks <ben-linux@fluff.org>
> > Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> > ---
> >  arch/arm/mach-s3c2410/include/mach/pm-core.h |    3 +++
> >  arch/arm/mach-s3c64xx/include/mach/pm-core.h |   17 +++++++++++++++++
> >  arch/arm/mach-s5pv210/include/mach/pm-core.h |    3 +++
> >  arch/arm/plat-samsung/pm.c                   |    2 ++
> >  4 files changed, 25 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h
> b/arch/arm/mach-
> > s3c2410/include/mach/pm-core.h
> > index 70a83b2..45eea52 100644
> > --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h
> > +++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
> > @@ -62,3 +62,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem
> > *regs,
> >  					   struct pm_uart_save *save)
> >  {
> >  }
> > +
> > +static inline void s3c_pm_restored_gpios(void) { }
> > +static inline void s3c_pm_saved_gpios(void) { }
> > diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
> b/arch/arm/mach-
> > s3c64xx/include/mach/pm-core.h
> > index 4ed0f58..38659be 100644
> > --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
> > +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
> > @@ -96,3 +96,20 @@ static inline void s3c_pm_arch_update_uart(void
> __iomem
> > *regs,
> >  		save->ucon = new_ucon;
> >  	}
> >  }
> > +
> > +static inline void s3c_pm_restored_gpios(void)
> > +{
> > +	/* ensure sleep mode has been cleared from the system */
> > +
> > +	__raw_writel(0, S3C64XX_SLPEN);
> > +}
> > +
> > +static inline void s3c_pm_saved_gpios(void)
> > +{
> > +	/* turn on the sleep mode and keep it there, as it seems that during
> > +	 * suspend the xCON registers get re-set and thus you can end up
> with
> > +	 * problems between going to sleep and resuming.
> > +	 */
> > +
> > +	__raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
> > +}
> > diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h
> b/arch/arm/mach-
> > s5pv210/include/mach/pm-core.h
> > index e8d394f..3e22109 100644
> > --- a/arch/arm/mach-s5pv210/include/mach/pm-core.h
> > +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h
> > @@ -41,3 +41,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem
> > *regs,
> >  {
> >  	/* nothing here yet */
> >  }
> > +
> > +static inline void s3c_pm_restored_gpios(void) { }
> > +static inline void s3c_pm_saved_gpios(void) { }
> > diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
> > index 5c0a440..4f9a951 100644
> > --- a/arch/arm/plat-samsung/pm.c
> > +++ b/arch/arm/plat-samsung/pm.c
> > @@ -268,6 +268,7 @@ static int s3c_pm_enter(suspend_state_t state)
> >  	/* save all necessary core registers not covered by the drivers */
> >
> >  	s3c_pm_save_gpios();
> > +	s3c_pm_saved_gpios();
> >  	s3c_pm_save_uarts();
> >  	s3c_pm_save_core();
> >
> > @@ -309,6 +310,7 @@ static int s3c_pm_enter(suspend_state_t state)
> >  	s3c_pm_restore_core();
> >  	s3c_pm_restore_uarts();
> >  	s3c_pm_restore_gpios();
> > +	s3c_pm_restored_gpios();
> >
> >  	s3c_pm_debug_init();
> >
> > --
> > 1.7.4.1
> 
> Ok, will apply.

This patch lacks stubs for s5p64x0, s5pc100 and exynos4. I will send a quick fix
soon.

Best regards
-- 
Marek Szyprowski
Samsung Poland R&D Center