From mboxrd@z Thu Jan  1 00:00:00 1970
From: kgene.kim@samsung.com (Kukjin Kim)
Date: Thu, 07 Oct 2010 11:01:58 +0900
Subject: [PATCH 4/7] ARM: S5PC210: I2C1/2 support
In-Reply-To: <20100930044837.GA16909@july>
References: <20100930044837.GA16909@july>
Message-ID: <004f01cb65c3$a299d610$e7cd8230$%kim@samsung.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Kyungmin Park wrote:
> 
> From: Kyungmin Park <kyungmin.park@samsung.com>
> 
> Define the I2C1/2 physcial address & interrupts.
> 
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  arch/arm/mach-s5pv310/include/mach/irqs.h |    2 ++
>  arch/arm/mach-s5pv310/include/mach/map.h  |    6 ++++--
>  2 files changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-
> s5pv310/include/mach/irqs.h
> index e81332f..aa17ec7 100644
> --- a/arch/arm/mach-s5pv310/include/mach/irqs.h
> +++ b/arch/arm/mach-s5pv310/include/mach/irqs.h
> @@ -70,6 +70,8 @@
>  #define IRQ_UART4		COMBINER_IRQ(26, 4)
> 
>  #define IRQ_IIC			COMBINER_IRQ(27, 0)
> +#define IRQ_IIC1		COMBINER_IRQ(27, 1)
> +#define IRQ_IIC2		COMBINER_IRQ(27, 2)
> 
>  #define IRQ_HSMMC0		COMBINER_IRQ(29, 0)
>  #define IRQ_HSMMC1		COMBINER_IRQ(29, 1)
> diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-
> s5pv310/include/mach/map.h
> index eab0ff7..118ad48 100644
> --- a/arch/arm/mach-s5pv310/include/mach/map.h
> +++ b/arch/arm/mach-s5pv310/include/mach/map.h
> @@ -69,7 +69,7 @@
> 
>  #define S5P_SZ_UART			SZ_256
> 
> -#define S5PV310_PA_IIC0			(0x13860000)
> +#define S5PV310_PA_I2C(x)		(0x13860000 + ((x) * 0x10000))

How about S5PV310_PA_IIC(x) like other Samsung SoCs.

> 
>  #define S5PV310_PA_TIMER		(0x139D0000)
>  #define S5P_PA_TIMER			S5PV310_PA_TIMER
> @@ -83,7 +83,9 @@
>  #define S3C_PA_HSMMC1			S5PV310_PA_HSMMC(1)
>  #define S3C_PA_HSMMC2			S5PV310_PA_HSMMC(2)
>  #define S3C_PA_HSMMC3			S5PV310_PA_HSMMC(3)
> -#define S3C_PA_IIC			S5PV310_PA_IIC0
> +#define S3C_PA_IIC			S5PV310_PA_I2C(0)
> +#define S3C_PA_IIC1			S5PV310_PA_I2C(1)
> +#define S3C_PA_IIC2			S5PV310_PA_I2C(2)
>  #define S3C_PA_RTC			S5PV310_PA_RTC
>  #define S3C_PA_WDT			S5PV310_PA_WATCHDOG
> 
> --


Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.