From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board
Date: Wed, 14 Sep 2011 20:50:42 +0900 [thread overview]
Message-ID: <007701cc72d4$8822d880$98688980$%kim@samsung.com> (raw)
In-Reply-To: <CAH9JG2V6Sfjmjupj5oBd_5vziBa4iezBpRfK9tNECrFO5sSfLw@mail.gmail.com>
Kyungmin Park wrote:
>
> Hi,
>
> It's required for boot universal c210 w/ EVT0 chip.
> Can you include it at 3.1 fixed branch?
>
Sure, will apply into samsung-fixes for 3.1.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> Thank you,
> Kyungmin Park
>
> On Tue, Jul 26, 2011 at 2:50 PM, Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
> > Commit 069d4e743 removed support for local timers and forced to use MCT
as
> > event source. However MCT is not operating properly on early revision
(EVT0)
> > of Exynos4 SoCs. All UniversalC210 boards are based on Exynos4 EVT0, so
> that
> > commit broke support for it. This patch provides a workaround that
enables
> > UniversalC210 boards to boot again. s5p-timer is used as an event
source.
> >
> > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> > ---
> > ?arch/arm/mach-exynos4/Kconfig ? ? ? ? ? ? ? | ? ?3 +++
> > ?arch/arm/mach-exynos4/mach-universal_c210.c | ? ?4 +++-
> > ?2 files changed, 6 insertions(+), 1 deletions(-)
> >
> > diff --git a/arch/arm/mach-exynos4/Kconfig
b/arch/arm/mach-exynos4/Kconfig
> > index 9d62e13..2aad73f 100644
> > --- a/arch/arm/mach-exynos4/Kconfig
> > +++ b/arch/arm/mach-exynos4/Kconfig
> > @@ -173,6 +173,9 @@ config MACH_ARMLEX4210
> > ?config MACH_UNIVERSAL_C210
> > ? ? ? ?bool "Mobile UNIVERSAL_C210 Board"
> > ? ? ? ?select CPU_EXYNOS4210
> > + ? ? ? select S5P_HRT
> > + ? ? ? select CLKSRC_MMIO
> > + ? ? ? select HAVE_SCHED_CLOCK
> > ? ? ? ?select S5P_GPIO_INT
> > ? ? ? ?select S5P_DEV_FIMC0
> > ? ? ? ?select S5P_DEV_FIMC1
> > diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c
b/arch/arm/mach-
> exynos4/mach-universal_c210.c
> > index 0e280d1..ca9e7b7 100644
> > --- a/arch/arm/mach-exynos4/mach-universal_c210.c
> > +++ b/arch/arm/mach-exynos4/mach-universal_c210.c
> > @@ -34,6 +34,7 @@
> > ?#include <plat/mfc.h>
> > ?#include <plat/sdhci.h>
> > ?#include <plat/pd.h>
> > +#include <plat/s5p-time.h>
> >
> > ?#include <mach/map.h>
> >
> > @@ -730,6 +731,7 @@ static void __init universal_map_io(void)
> > ? ? ? ?s5p_init_io(NULL, 0, S5P_VA_CHIPID);
> > ? ? ? ?s3c24xx_init_clocks(24000000);
> > ? ? ? ?s3c24xx_init_uarts(universal_uartcfgs,
ARRAY_SIZE(universal_uartcfgs));
> > + ? ? ? s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
> > ?}
> >
> > ?static void __init universal_reserve(void)
> > @@ -766,6 +768,6 @@ MACHINE_START(UNIVERSAL_C210,
> "UNIVERSAL_C210")
> > ? ? ? ?.init_irq ? ? ? = exynos4_init_irq,
> > ? ? ? ?.map_io ? ? ? ? = universal_map_io,
> > ? ? ? ?.init_machine ? = universal_machine_init,
> > - ? ? ? .timer ? ? ? ? ?= &exynos4_timer,
> > + ? ? ? .timer ? ? ? ? ?= &s5p_timer,
> > ? ? ? ?.reserve ? ? ? ?= &universal_reserve,
> > ?MACHINE_END
> > --
> > 1.7.1.569.g6f426
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe
linux-samsung-soc" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at ?http://vger.kernel.org/majordomo-info.html
> >
next prev parent reply other threads:[~2011-09-14 11:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1311659456-6659-1-git-send-email-m.szyprowski@samsung.com>
[not found] ` <1311659456-6659-3-git-send-email-m.szyprowski@samsung.com>
2011-09-14 5:02 ` [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board Kyungmin Park
2011-09-14 11:50 ` Kukjin Kim [this message]
2011-09-15 6:03 ` Kukjin Kim
2011-09-15 6:32 ` Kyungmin Park
2011-09-15 7:38 ` Kukjin Kim
2011-09-15 7:42 ` Kyungmin Park
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='007701cc72d4$8822d880$98688980$%kim@samsung.com' \
--to=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox