From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] sdhci-s3c: Add SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK quirk for Samsung SoC
Date: Sat, 28 Aug 2010 09:47:51 +0900 [thread overview]
Message-ID: <009c01cb464a$a6ffb050$f4ff10f0$%kim@samsung.com> (raw)
In-Reply-To: <20100827195622.GN23079@void.printf.net>
Chris Ball wrote:
>
> Hi,
>
Hi :-)
> This wasn't merged, after some questions from Kyungmin Park -- is
> the patch still desirable?
>
This patch is being in mainline now.
(Commit ID: 3fe42e077f65351503f5004031549db330bb105e)
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> On Thu, Jun 10, 2010 at 08:39:51PM +0900, Kukjin Kim wrote:
> > From: Lee Hyuk <hyuk1.lee@samsung.com>
> >
> > On Samsung's SDMMC hosts the timeout clock is derivied from the SD
> > Clock, which is set dynamically.
> > So, checked 'SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK' quirk and
> removed
> > 'sdhci_s3c_get_timeout_clk' callback which doesn't need any more.
> >
> > Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com>
> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> > ---
> > drivers/mmc/host/sdhci-s3c.c | 10 +++-------
> > 1 files changed, 3 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> > index af21792..ca09382 100644
> > --- a/drivers/mmc/host/sdhci-s3c.c
> > +++ b/drivers/mmc/host/sdhci-s3c.c
> > @@ -110,11 +110,6 @@ static unsigned int sdhci_s3c_get_max_clk(struct
> sdhci_host *host)
> > return max;
> > }
> >
> > -static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
> > -{
> > - return sdhci_s3c_get_max_clk(host) / 1000000;
> > -}
> > -
> > /**
> > * sdhci_s3c_consider_clock - consider one the bus clocks for current
setting
> > * @ourhost: Our SDHCI instance.
> > @@ -188,7 +183,6 @@ static void sdhci_s3c_set_clock(struct sdhci_host
*host,
> unsigned int clock)
> >
> > ourhost->cur_clk = best_src;
> > host->max_clk = clk_get_rate(clk);
> > - host->timeout_clk = sdhci_s3c_get_timeout_clk(host);
> >
> > ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
> > ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
> > @@ -211,7 +205,6 @@ static void sdhci_s3c_set_clock(struct sdhci_host
*host,
> unsigned int clock)
> >
> > static struct sdhci_ops sdhci_s3c_ops = {
> > .get_max_clock = sdhci_s3c_get_max_clk,
> > - .get_timeout_clock = sdhci_s3c_get_timeout_clk,
> > .set_clock = sdhci_s3c_set_clock,
> > };
> >
> > @@ -335,6 +328,9 @@ static int __devinit sdhci_s3c_probe(struct
> platform_device *pdev)
> > host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
> > SDHCI_QUIRK_32BIT_DMA_SIZE);
> >
> > + /* HSMMC on Samsung SoCs uses SDCLK as timeout clock. */
> > + host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
> > +
> > ret = sdhci_add_host(host);
> > if (ret) {
> > dev_err(dev, "sdhci_add_host() failed\n");
> > --
> > 1.6.2.5
>
> --
> Chris Ball <cjb@laptop.org> <http://printf.net/>
> One Laptop Per Child
prev parent reply other threads:[~2010-08-28 0:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-10 11:39 [PATCH] sdhci-s3c: Add SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK quirk for Samsung SoC Kukjin Kim
2010-06-11 3:32 ` Kyungmin Park
2010-06-11 8:08 ` Kukjin Kim
2010-06-11 8:18 ` Kyungmin Park
2010-08-27 19:56 ` Chris Ball
2010-08-28 0:47 ` Kukjin Kim [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='009c01cb464a$a6ffb050$f4ff10f0$%kim@samsung.com' \
--to=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).