From mboxrd@z Thu Jan  1 00:00:00 1970
From: kgene@kernel.org (Kukjin Kim)
Date: Thu, 13 Aug 2015 19:17:27 +0900
Subject: [PATCH v2] ARM: dts: exynos4412-odroidu3: Enable SPI1.
In-Reply-To: <55CC6E1B.2050707@samsung.com>
References: <1439456813-4918-1-git-send-email-aballier@gentoo.org>
 <55CC6E1B.2050707@samsung.com>
Message-ID: <009d01d0d5b1$417e5370$c47afa50$@kernel.org>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Krzysztof Kozlowski wrote:
> 
> W dniu 13.08.2015 o 18:06, Alexis Ballier pisze:
> > SPI1 is available on IO Port #2 (as depicted on their website) in
> > PCB Revision 0.5 of Hardkernel Odroid U3 board.
> > The shield connects a 256KiB spi-nor flash on that bus.
> >
> > Signed-off-by: Alexis Ballier <aballier@gentoo.org>
> >
> > ---
> >
> > Changes in v2: Use GPIO_ACTIVE_HIGH (Krzysztof Kozlowski)
> >
> >  arch/arm/boot/dts/exynos4412-odroidu3.dts | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> 
> Thanks for fixing, looks good:
> 
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> 
Applied, thanks.

- Kukjin