[PATCH] ARM: S5P: Add PMU device

[kgene.kim@samsung.com (Kukjin Kim)]

Joonyoung Shim wrote:
> 
> On 7/5/2010 9:57 PM, Kukjin Kim wrote:
> > Maurus Cuelenaere wrote:
> >>  Op 05-07-10 03:46, Joonyoung Shim schreef:
> >>> This patch adds an initcall for the s5p platforms so that they register
> >>> their PMU IRQs with the PMU framework in the Kernel.
> >>>
> >>> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> >>> ---
> >>>  arch/arm/mach-s5p6442/include/mach/irqs.h |    2 +-
> >>>  arch/arm/mach-s5pc100/include/mach/irqs.h |    1 +
> >>>  arch/arm/mach-s5pv210/include/mach/irqs.h |    1 +
> >>>  arch/arm/plat-s5p/Makefile                |    1 +
> >>>  arch/arm/plat-s5p/dev-pmu.c               |   37
> >> +++++++++++++++++++++++++++++
> >>>  5 files changed, 41 insertions(+), 1 deletions(-)
> >>>  create mode 100644 arch/arm/plat-s5p/dev-pmu.c
> >> Wouldn't it be better if this was in plat-samsung? I can see that the S3C6410
> >> datasheet mentions a PMU_IRQ_ENABLE bit in SYS_OTHERS so I suspect
> that it
> >> has
> >> the same functionality (even though there's no mention of which interrupt this
> >> is).
> >>
> > Yes, I also found PMU_IRQ_ENABLE bit in System Others register of S3C6410
> datasheet. But as your comments, could not found the interrupt number and any
> description...Actually, need to check whether it's available or not.
> >
> 
> Right, please check it, i cannot do it.
> 
Hahaha..should I check it?..ok..let you know about that soon.

> > And S5P6440 has it.
> > So Joonyoung, it would be helpful if you could add 6440 PMUIRQ (VIC1[23]) in
> this patch.
> >
> 
> It already was added.
> 
Oh, ok. I found.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.