From mboxrd@z Thu Jan  1 00:00:00 1970
From: kgene.kim@samsung.com (Kukjin Kim)
Date: Fri, 20 Aug 2010 19:03:21 +0900
Subject: [PATCH 1/3] ARM: S5PC210: Use the correct GPIO base addresses
In-Reply-To: <20100806042343.GA19431@july>
References: <20100806042343.GA19431@july>
Message-ID: <00d701cb404e$f58dd190$e0a974b0$%kim@samsung.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Kyungmin Park wrote:
> 
> From: Kyungmin Park <kyungmin.park@samsung.com>
> 
> The S5PC210 has three GPIO base addresses.
> 
> Part1 Base Address=0x11400000
> Part2 Base Address=0x11000000
> Part3 Base Address=0x03860000
> 
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  arch/arm/mach-s5pv310/include/mach/map.h |    4 +++-
>  1 files changed, 3 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-
> s5pv310/include/mach/map.h
> index 87697c9..7eb2a7a 100644
> --- a/arch/arm/mach-s5pv310/include/mach/map.h
> +++ b/arch/arm/mach-s5pv310/include/mach/map.h
> @@ -39,8 +39,10 @@
>  #define S5PV310_PA_GIC_DIST		(0x10501000)
>  #define S5PV310_PA_L2CC			(0x10502000)
> 
> -#define S5PV310_PA_GPIO			(0x11000000)
> +#define S5PV310_PA_GPIO			(0x11400000)
>  #define S5P_PA_GPIO			S5PV310_PA_GPIO
> +#define S5PV310_PA_GPIO2		(0x11000000)
> +#define S5PV310_PA_GPIO3		(0x03860000)
> 
>  #define S5PV310_PA_UART			(0x13800000)
> 
> --
Ok..will apply.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.