From: geoff@infradead.org (Geoff Levand)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v16 01/20] arm64: Fold proc-macros.S into assembler.h
Date: Thu, 14 Apr 2016 21:21:36 +0000 [thread overview]
Message-ID: <00d79b6bf1f9ece80aa1fb92be204f6c6fead49e.1460668521.git.geoff@infradead.org> (raw)
In-Reply-To: <cover.1460668521.git.geoff@infradead.org>
To allow the assembler macros defined in arch/arm64/mm/proc-macros.S to
be used outside the mm code move the contents of proc-macros.S to
asm/assembler.h. Also, delete proc-macros.S, and fix up all references
to proc-macros.S.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
[rebased, included dcache_by_line_op]
Signed-off-by: James Morse <james.morse@arm.com>
---
arch/arm64/include/asm/assembler.h | 82 ++++++++++++++++++++++++++++++-
arch/arm64/mm/cache.S | 2 -
arch/arm64/mm/proc-macros.S | 98 --------------------------------------
arch/arm64/mm/proc.S | 3 --
4 files changed, 81 insertions(+), 104 deletions(-)
delete mode 100644 arch/arm64/mm/proc-macros.S
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 70f7b9e..c72474c 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -1,5 +1,5 @@
/*
- * Based on arch/arm/include/asm/assembler.h
+ * Based on arch/arm/include/asm/assembler.h, arch/arm/mm/proc-macros.S
*
* Copyright (C) 1996-2000 Russell King
* Copyright (C) 2012 ARM Ltd.
@@ -23,6 +23,8 @@
#ifndef __ASM_ASSEMBLER_H
#define __ASM_ASSEMBLER_H
+#include <asm/asm-offsets.h>
+#include <asm/pgtable-hwdef.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
@@ -212,6 +214,84 @@ lr .req x30 // link register
.endm
/*
+ * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
+ */
+ .macro vma_vm_mm, rd, rn
+ ldr \rd, [\rn, #VMA_VM_MM]
+ .endm
+
+/*
+ * mmid - get context id from mm pointer (mm->context.id)
+ */
+ .macro mmid, rd, rn
+ ldr \rd, [\rn, #MM_CONTEXT_ID]
+ .endm
+
+/*
+ * dcache_line_size - get the minimum D-cache line size from the CTR register.
+ */
+ .macro dcache_line_size, reg, tmp
+ mrs \tmp, ctr_el0 // read CTR
+ ubfm \tmp, \tmp, #16, #19 // cache line size encoding
+ mov \reg, #4 // bytes per word
+ lsl \reg, \reg, \tmp // actual cache line size
+ .endm
+
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register.
+ */
+ .macro icache_line_size, reg, tmp
+ mrs \tmp, ctr_el0 // read CTR
+ and \tmp, \tmp, #0xf // cache line size encoding
+ mov \reg, #4 // bytes per word
+ lsl \reg, \reg, \tmp // actual cache line size
+ .endm
+
+/*
+ * tcr_set_idmap_t0sz - update TCR.T0SZ so that we can load the ID map
+ */
+ .macro tcr_set_idmap_t0sz, valreg, tmpreg
+#ifndef CONFIG_ARM64_VA_BITS_48
+ ldr_l \tmpreg, idmap_t0sz
+ bfi \valreg, \tmpreg, #TCR_T0SZ_OFFSET, #TCR_TxSZ_WIDTH
+#endif
+ .endm
+
+/*
+ * Macro to perform a data cache maintenance for the interval
+ * [kaddr, kaddr + size)
+ *
+ * op: operation passed to dc instruction
+ * domain: domain used in dsb instruciton
+ * kaddr: starting virtual address of the region
+ * size: size of the region
+ * Corrupts: kaddr, size, tmp1, tmp2
+ */
+ .macro dcache_by_line_op op, domain, kaddr, size, tmp1, tmp2
+ dcache_line_size \tmp1, \tmp2
+ add \size, \kaddr, \size
+ sub \tmp2, \tmp1, #1
+ bic \kaddr, \kaddr, \tmp2
+9998: dc \op, \kaddr
+ add \kaddr, \kaddr, \tmp1
+ cmp \kaddr, \size
+ b.lo 9998b
+ dsb \domain
+ .endm
+
+/*
+ * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present
+ */
+ .macro reset_pmuserenr_el0, tmpreg
+ mrs \tmpreg, id_aa64dfr0_el1 // Check ID_AA64DFR0_EL1 PMUVer
+ sbfx \tmpreg, \tmpreg, #8, #4
+ cmp \tmpreg, #1 // Skip if no PMU present
+ b.lt 9000f
+ msr pmuserenr_el0, xzr // Disable PMU access from EL0
+9000:
+ .endm
+
+/*
* Annotate a function as position independent, i.e., safe to be called before
* the kernel virtual mapping is activated.
*/
diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
index 6df0706..50ff9ba 100644
--- a/arch/arm64/mm/cache.S
+++ b/arch/arm64/mm/cache.S
@@ -24,8 +24,6 @@
#include <asm/cpufeature.h>
#include <asm/alternative.h>
-#include "proc-macros.S"
-
/*
* flush_icache_range(start,end)
*
diff --git a/arch/arm64/mm/proc-macros.S b/arch/arm64/mm/proc-macros.S
deleted file mode 100644
index e6a30e1..0000000
--- a/arch/arm64/mm/proc-macros.S
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Based on arch/arm/mm/proc-macros.S
- *
- * Copyright (C) 2012 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-
-/*
- * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
- */
- .macro vma_vm_mm, rd, rn
- ldr \rd, [\rn, #VMA_VM_MM]
- .endm
-
-/*
- * mmid - get context id from mm pointer (mm->context.id)
- */
- .macro mmid, rd, rn
- ldr \rd, [\rn, #MM_CONTEXT_ID]
- .endm
-
-/*
- * dcache_line_size - get the minimum D-cache line size from the CTR register.
- */
- .macro dcache_line_size, reg, tmp
- mrs \tmp, ctr_el0 // read CTR
- ubfm \tmp, \tmp, #16, #19 // cache line size encoding
- mov \reg, #4 // bytes per word
- lsl \reg, \reg, \tmp // actual cache line size
- .endm
-
-/*
- * icache_line_size - get the minimum I-cache line size from the CTR register.
- */
- .macro icache_line_size, reg, tmp
- mrs \tmp, ctr_el0 // read CTR
- and \tmp, \tmp, #0xf // cache line size encoding
- mov \reg, #4 // bytes per word
- lsl \reg, \reg, \tmp // actual cache line size
- .endm
-
-/*
- * tcr_set_idmap_t0sz - update TCR.T0SZ so that we can load the ID map
- */
- .macro tcr_set_idmap_t0sz, valreg, tmpreg
-#ifndef CONFIG_ARM64_VA_BITS_48
- ldr_l \tmpreg, idmap_t0sz
- bfi \valreg, \tmpreg, #TCR_T0SZ_OFFSET, #TCR_TxSZ_WIDTH
-#endif
- .endm
-
-/*
- * Macro to perform a data cache maintenance for the interval
- * [kaddr, kaddr + size)
- *
- * op: operation passed to dc instruction
- * domain: domain used in dsb instruciton
- * kaddr: starting virtual address of the region
- * size: size of the region
- * Corrupts: kaddr, size, tmp1, tmp2
- */
- .macro dcache_by_line_op op, domain, kaddr, size, tmp1, tmp2
- dcache_line_size \tmp1, \tmp2
- add \size, \kaddr, \size
- sub \tmp2, \tmp1, #1
- bic \kaddr, \kaddr, \tmp2
-9998: dc \op, \kaddr
- add \kaddr, \kaddr, \tmp1
- cmp \kaddr, \size
- b.lo 9998b
- dsb \domain
- .endm
-
-/*
- * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present
- */
- .macro reset_pmuserenr_el0, tmpreg
- mrs \tmpreg, id_aa64dfr0_el1 // Check ID_AA64DFR0_EL1 PMUVer
- sbfx \tmpreg, \tmpreg, #8, #4
- cmp \tmpreg, #1 // Skip if no PMU present
- b.lt 9000f
- msr pmuserenr_el0, xzr // Disable PMU access from EL0
-9000:
- .endm
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 543f519..9f6deac 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -23,13 +23,10 @@
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/cpufeature.h>
#include <asm/alternative.h>
-#include "proc-macros.S"
-
#ifdef CONFIG_ARM64_64K_PAGES
#define TCR_TG_FLAGS TCR_TG0_64K | TCR_TG1_64K
#elif defined(CONFIG_ARM64_16K_PAGES)
--
2.5.0
next prev parent reply other threads:[~2016-04-14 21:21 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-14 21:21 [PATCH v16 00/20] arm64 kexec kernel patches v16 Geoff Levand
2016-04-14 21:21 ` [PATCH v16 04/20] arm64: kvm: Move lr save/restore from do_el2_call into EL1 Geoff Levand
2016-04-14 21:21 ` Geoff Levand [this message]
2016-04-14 21:21 ` [PATCH v16 02/20] arm64: Cleanup SCTLR flags Geoff Levand
2016-04-14 21:21 ` [PATCH v16 05/20] arm64: hyp/kvm: Extend hyp-stub API to allow function calls at EL2 Geoff Levand
2016-04-14 21:21 ` [PATCH v16 03/20] arm64: kvm: Move the do_el2_call macro to a header file Geoff Levand
2016-04-14 21:21 ` [PATCH v16 09/20] arm64: Add new asm macro copy_page Geoff Levand
2016-04-14 21:21 ` [PATCH v16 12/20] arm64/kexec: Add core kexec support Geoff Levand
2016-04-14 21:21 ` [PATCH v16 11/20] arm64: Add back cpu_reset routines Geoff Levand
2016-04-14 21:21 ` [PATCH v16 08/20] arm64: Promote KERNEL_START/KERNEL_END definitions to a header file Geoff Levand
2016-04-14 21:21 ` [PATCH v16 16/20] arm64: limit memory regions based on DT property, usable-memory Geoff Levand
2016-04-14 21:21 ` [PATCH v16 14/20] arm64/kexec: Add pr_debug output Geoff Levand
2016-04-14 21:21 ` [PATCH v16 15/20] arm64: kdump: reserve memory for crash dump kernel Geoff Levand
2016-04-14 21:21 ` [PATCH v16 10/20] arm64: head.S: el2_setup() to accept sctlr_el1 as an argument Geoff Levand
2016-04-14 21:21 ` [PATCH v16 07/20] arm64: kernel: Include _AC definition in page.h Geoff Levand
2016-04-14 21:21 ` [PATCH v16 18/20] arm64: kdump: add kdump support Geoff Levand
2016-04-14 21:21 ` [PATCH v16 13/20] arm64/kexec: Enable kexec in the arm64 defconfig Geoff Levand
2016-04-14 21:21 ` [PATCH v16 17/20] arm64: kdump: implement machine_crash_shutdown() Geoff Levand
2016-04-14 21:21 ` [PATCH v16 06/20] arm64: kvm: allows kvm cpu hotplug Geoff Levand
2016-04-14 21:21 ` [PATCH v16 19/20] arm64: kdump: enable kdump in the arm64 defconfig Geoff Levand
2016-04-14 21:21 ` [PATCH v16 20/20] arm64: kdump: update a kernel doc Geoff Levand
2016-05-12 18:24 ` [PATCH v16 00/20] arm64 kexec kernel patches v16 Julien Grall
2016-05-13 4:55 ` AKASHI Takahiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00d79b6bf1f9ece80aa1fb92be204f6c6fead49e.1460668521.git.geoff@infradead.org \
--to=geoff@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).