From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] fix to use static declarations for samsung stuff
Date: Fri, 10 Feb 2012 21:55:37 +0900 [thread overview]
Message-ID: <013b01cce7f3$48c87e30$da597a90$%kim@samsung.com> (raw)
Hi Russell, Arnd and Olof,
Please pull following branch which is including fix to use static
declarations for samsung stuff.
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next/cleanup-use-static
I'm not sure it can be sent to upstream for v3.3 but if so, would be better.
As a note, conflicts have been occurred when merge
arm-soc/depends/rmk/for-armsoc.
Following is my preferred resolution.
If any problems, please kindly let me know.
diff --cc arch/arm/mach-exynos/dma.c
index 8dec3db,91370de..0000000
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@@ -74,23 -74,10 +74,10 @@@ static struct dma_pl330_platdata exynos
.peri_id = pdma0_peri,
};
- static struct amba_device exynos4_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma0_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA0,
- .end = EXYNOS4_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
- };
-AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
EXYNOS4_PA_PDMA0,
- {IRQ_PDMA0}, &exynos4_pdma0_pdata);
++static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
++ EXYNOS4_PA_PDMA0, {IRQ_PDMA0}, &exynos4_pdma0_pdata);
-u8 pdma1_peri[] = {
+static u8 pdma1_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM1_RX,
@@@ -123,21 -110,8 +110,8 @@@ static struct dma_pl330_platdata exynos
.peri_id = pdma1_peri,
};
- static struct amba_device exynos4_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma1_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA1,
- .end = EXYNOS4_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
- };
-AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330,
EXYNOS4_PA_PDMA1,
- {IRQ_PDMA1}, &exynos4_pdma1_pdata);
++static AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330,
++ EXYNOS4_PA_PDMA1, {IRQ_PDMA1}, &exynos4_pdma1_pdata);
static int __init exynos4_dma_init(void)
{
diff --cc arch/arm/mach-s5p64x0/dma.c
index 8fce1161,f7f68ad..0000000
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@@ -108,20 -108,8 +108,8 @@@ static struct dma_pl330_platdata s5p645
.peri_id = s5p6450_pdma_peri,
};
- static struct amba_device s5p64x0_device_pdma = {
- .dev = {
- .init_name = "dma-pl330",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .res = {
- .start = S5P64X0_PA_PDMA,
- .end = S5P64X0_PA_PDMA + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DMA0, NO_IRQ},
- .periphid = 0x00041330,
- };
-AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA,
- {IRQ_DMA0}, NULL);
++static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330,
++ S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL);
static int __init s5p64x0_dma_init(void)
{
diff --cc arch/arm/mach-s5pc100/dma.c
index 395e46b,96b1ab3..0000000
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@@ -73,23 -73,10 +73,10 @@@ static struct dma_pl330_platdata s5pc10
.peri_id = pdma0_peri,
};
- static struct amba_device s5pc100_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_pdma0_pdata,
- },
- .res = {
- .start = S5PC100_PA_PDMA0,
- .end = S5PC100_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
- };
-AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330,
S5PC100_PA_PDMA0,
- {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
++static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330,
++ S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
-u8 pdma1_peri[] = {
+static u8 pdma1_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@@ -127,21 -114,8 +114,8 @@@ static struct dma_pl330_platdata s5pc10
.peri_id = pdma1_peri,
};
- static struct amba_device s5pc100_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_pdma1_pdata,
- },
- .res = {
- .start = S5PC100_PA_PDMA1,
- .end = S5PC100_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
- };
-AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330,
S5PC100_PA_PDMA1,
- {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
++static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330,
++ S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
static int __init s5pc100_dma_init(void)
{
diff --cc arch/arm/mach-s5pv210/dma.c
index fc1be6e,f6885d2..0000000
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@@ -71,23 -71,10 +71,10 @@@ static struct dma_pl330_platdata s5pv21
.peri_id = pdma0_peri,
};
- static struct amba_device s5pv210_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_pdma0_pdata,
- },
- .res = {
- .start = S5PV210_PA_PDMA0,
- .end = S5PV210_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
- };
-AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330,
S5PV210_PA_PDMA0,
- {IRQ_PDMA0}, &s5pv210_pdma0_pdata);
++static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330,
++ S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata);
-u8 pdma1_peri[] = {
+static u8 pdma1_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@@ -127,21 -114,8 +114,8 @@@ static struct dma_pl330_platdata s5pv21
.peri_id = pdma1_peri,
};
- static struct amba_device s5pv210_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_pdma1_pdata,
- },
- .res = {
- .start = S5PV210_PA_PDMA1,
- .end = S5PV210_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
- };
-AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330,
S5PV210_PA_PDMA1,
- {IRQ_PDMA1}, &s5pv210_pdma1_pdata);
++static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330,
++ S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata);
static int __init s5pv210_dma_init(void)
{
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
The following changes since commit 62aa2b537c6f5957afd98e29f96897419ed5ebab:
Linux 3.3-rc2 (2012-01-31 13:31:54 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next/cleanup-use-static
Kukjin Kim (7):
ARM: EXYNOS: use static declaration when it is not used in other files
ARM: S3C24XX: use static declaration when it is not used in other
files
ARM: S3C64XX: use static declaration when it is not used in other
files
ARM: S5P64X0: use static declaration when it is not used in other
files
ARM: S5PC100: use static declaration when it is not used in other
files
ARM: S5PV210: use static declaration when it is not used in other
files
ARM: SAMSUNG: use static declaration when it is not used in other
files
arch/arm/mach-exynos/clock-exynos4210.c | 2 +-
arch/arm/mach-exynos/clock-exynos4212.c | 2 +-
arch/arm/mach-exynos/clock.c | 2 +-
arch/arm/mach-exynos/common.c | 2 +-
arch/arm/mach-exynos/dma.c | 12 ++++----
arch/arm/mach-exynos/mach-origen.c | 2 +-
arch/arm/mach-exynos/mach-universal_c210.c | 2 +-
arch/arm/mach-s3c2410/mach-h1940.c | 12 ++++----
arch/arm/mach-s3c2416/clock.c | 6 ----
arch/arm/mach-s3c2416/mach-smdk2416.c | 8 +++---
arch/arm/mach-s3c2440/mach-gta02.c | 4 +-
arch/arm/mach-s3c2440/mach-rx1950.c | 12 ++++----
arch/arm/mach-s3c64xx/common.c | 2 +-
arch/arm/mach-s3c64xx/common.h | 2 -
arch/arm/mach-s3c64xx/irq-pm.c | 2 +-
arch/arm/mach-s5p64x0/clock.c | 11 ++++---
arch/arm/mach-s5p64x0/dma.c | 10 +++---
arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h | 7 -----
arch/arm/mach-s5pc100/clock.c | 28
++++++++++----------
arch/arm/mach-s5pc100/dma.c | 12 ++++----
arch/arm/mach-s5pv210/dma.c | 12 ++++----
arch/arm/mach-s5pv210/mach-goni.c | 2 +-
arch/arm/mach-s5pv210/mach-smdkv210.c | 2 +-
arch/arm/plat-s3c24xx/s3c2443-clock.c | 2 +-
arch/arm/plat-s5p/irq-eint.c | 2 +-
arch/arm/plat-s5p/irq-gpioint.c | 2 +-
arch/arm/plat-samsung/devs.c | 13 +--------
arch/arm/plat-samsung/dma-ops.c | 2 +-
28 files changed, 76 insertions(+), 101 deletions(-)
next reply other threads:[~2012-02-10 12:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-10 12:55 Kukjin Kim [this message]
2012-03-07 11:55 ` [GIT PULL] fix to use static declarations for samsung stuff Kukjin Kim
2012-03-07 12:15 ` Arnd Bergmann
2012-03-07 22:49 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='013b01cce7f3$48c87e30$da597a90$%kim@samsung.com' \
--to=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).