From mboxrd@z Thu Jan 1 00:00:00 1970 From: kgene.kim@samsung.com (Kukjin Kim) Date: Thu, 20 Mar 2014 12:55:28 +0900 Subject: [PATCH 47/62] ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1 In-Reply-To: <1395257399-359545-48-git-send-email-arnd@arndb.de> References: <1395257399-359545-1-git-send-email-arnd@arndb.de> <1395257399-359545-48-git-send-email-arnd@arndb.de> Message-ID: <01ee01cf43f0$3b436bc0$b1ca4340$@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Arnd Bergmann wrote: > > This board uses both MMC controllers, so we need to enable > the Kconfig option to define the platform data. > > Signed-off-by: Arnd Bergmann > Cc: Tomasz Figa > Cc: Kukjin Kim > Cc: Ben Dooks > --- > arch/arm/mach-s3c64xx/Kconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig > index 64f04e6..92885d7 100644 > --- a/arch/arm/mach-s3c64xx/Kconfig > +++ b/arch/arm/mach-s3c64xx/Kconfig > @@ -87,6 +87,7 @@ config MACH_SMDK6400 > select CPU_S3C6400 > select S3C64XX_SETUP_SDHCI > select S3C_DEV_HSMMC > + select S3C_DEV_HSMMC1 > select S3C_DEV_NAND Well, only HSMMC ch1 is used on smdk6400 and S3C_DEV_NAND is not needed. So should be following: diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 64f04e6..3136d86 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -86,8 +86,7 @@ config MACH_SMDK6400 bool "SMDK6400" select CPU_S3C6400 select S3C64XX_SETUP_SDHCI - select S3C_DEV_HSMMC - select S3C_DEV_NAND + select S3C_DEV_HSMMC1 help Machine support for the Samsung SMDK6400 Thanks, Kukjin > help > Machine support for the Samsung SMDK6400 > -- > 1.8.3.2