From mboxrd@z Thu Jan 1 00:00:00 1970 From: kgene.kim@samsung.com (Kukjin Kim) Date: Thu, 24 Feb 2011 10:33:43 +0900 Subject: [PATCH 1/2] ARM: S5PC110: disable unused power regulators on Goni board In-Reply-To: <01f301cbd343$d0af4c90$720de5b0$%kim@samsung.com> References: <1297760784-8486-1-git-send-email-m.szyprowski@samsung.com> <1297760784-8486-2-git-send-email-m.szyprowski@samsung.com> <01f301cbd343$d0af4c90$720de5b0$%kim@samsung.com> Message-ID: <022a01cbd3c2$e335ef70$a9a1ce50$%kim@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Kukjin Kim wrote: > > Marek Szyprowski wrote: > > > > A lot of power regulator has been enabled by default causing the board > > to consume a lot of power. This patch fixes this issue. > > > > Signed-off-by: Marek Szyprowski > > Signed-off-by: Kyungmin Park > > --- > > arch/arm/mach-s5pv210/mach-goni.c | 10 +--------- > > 1 files changed, 1 insertions(+), 9 deletions(-) (snip) > > @@ -371,7 +369,6 @@ static struct regulator_init_data goni_ldo11_data = { > > .min_uV = 2800000, > > .max_uV = 2800000, > > .apply_uV = 1, > > - .always_on = 1, > > }, > > }; Oops, already merged above changes by Sylwester's "Add supplies for CIF camera on GONI board" into my for-next. So will apply this with removing above changes. (snip) > > @@ -391,7 +387,6 @@ static struct regulator_init_data goni_ldo13_data = { > > .min_uV = 2800000, > > .max_uV = 2800000, > > .apply_uV = 1, > > - .always_on = 1, > > }, > > }; Same as above. > > @@ -401,7 +396,6 @@ static struct regulator_init_data goni_ldo14_data = { > > .min_uV = 1800000, > > .max_uV = 1800000, > > .apply_uV = 1, > > - .always_on = 1, > > }, > > }; Same as above. (snip) > > -- > > Ok...will apply this. > And how about "mach-aquila.c"? > Thanks. Best regards, Kgene. -- Kukjin Kim , Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.