From mboxrd@z Thu Jan  1 00:00:00 1970
From: jagan@openedev.com (Jagan Teki)
Date: Mon, 23 Jan 2017 10:49:24 +0100
Subject: [PATCH v2 2/3] ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC
 initial support
In-Reply-To: <20170123094735.GO5662@dragon>
References: <1484867375-22411-1-git-send-email-jagan@openedev.com>
 <1484867375-22411-2-git-send-email-jagan@openedev.com>
 <20170123094735.GO5662@dragon>
Message-ID: <02a7c35f-46c8-392a-732a-e34f82b547fd@openedev.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Monday 23 January 2017 10:47 AM, Shawn Guo wrote:
> On Fri, Jan 20, 2017 at 12:09:34AM +0100, Jagan Teki wrote:
>> From: Jagan Teki <jagan@amarulasolutions.com>
>>
>> Engicam Is.IoT MX6UL has separate module for eMMC, so add emmc dts
>> file for imx6ul-isiot.dtsi, usdhc2 node represent eMMC.
>>
>> dmesg:
>> -----
>> mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
>> mmc1: new DDR MMC card at address 0001
>> mmcblk1: mmc1:0001 M62704 3.53 GiB
>>
>> Cc: Matteo Lisi <matteo.lisi@engicam.com>
>> Cc: Michael Trimarchi <michael@amarulasolutions.com>
>> Cc: Signed-off-by: Shawn Guo <shawnguo@kernel.org>
>
> You only want to Cc me, not sign it off for me.  I removed the it when
> applying.

Sorry, I accidentally did this will take care for next time.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.