From mboxrd@z Thu Jan 1 00:00:00 1970 From: maitysanchayan@gmail.com (Sanchayan Maity) Date: Wed, 5 Aug 2015 14:25:50 +0530 Subject: [PATCH v3 2/3] input: Add DT binding documentation for Colibri VF50 touchscreen In-Reply-To: References: Message-ID: <02b69355beb87bd1087d9df76d82fa0aeb161d61.1438763030.git.maitysanchayan@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This adds device tree binding documentation for the Colibri VF50 touchscreen driver. Signed-off-by: Sanchayan Maity --- .../bindings/input/touchscreen/colibri-vf50-ts.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt new file mode 100644 index 0000000..3e0efac --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt @@ -0,0 +1,32 @@ +* Toradex Colibri VF50 Touchscreen driver + +Required Properties: +- compatible must be toradex,vf50-touchctrl +- io-channels: adc channels being used by the Colibri VF50 module +- xp-gpios: FET gate driver for input of X+ +- xm-gpios: FET gate driver for input of X- +- yp-gpios: FET gate driver for input of Y+ +- ym-gpios: FET gate driver for input of Y- +- pen-detect-gpios: GPIO for pen detect irq +- pinctrl-names: "idle", "default", "gpios" +- pinctrl-0: pinctrl node for idle state gpio pinmux +- pinctrl-1: pinctrl node for touch detection state pinmux +- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers + +Example: + + touchctrl: vf50_touchctrl { + compatible = "toradex,vf50-touchctrl"; + io-channels = <&adc1 0>,<&adc0 0>, + <&adc0 1>,<&adc1 2>; + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + pen-detect-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "idle","default","gpios"; + pinctrl-0 = <&pinctrl_touchctrl_idle>; + pinctrl-1 = <&pinctrl_touchctrl_default>; + pinctrl-2 = <&pinctrl_touchctrl_gpios>; + status = "disabled"; + }; -- 2.5.0