[PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value

[PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value

[Chander Kashyap]

Replace irq_domain_add_simple with "irq_domain_add_linear" in order to use
linear irq domain, and to remove hardcoded irq_base_value.

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
---
Changes since v1:
	- Replaced irq_domain_add_simple with irq_domain_add_linear,
	  as suggested by Tomasz

 drivers/irqchip/exynos-combiner.c |   15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c
index 4c68265..2551046 100644
--- a/drivers/irqchip/exynos-combiner.c
+++ b/drivers/irqchip/exynos-combiner.c
@@ -206,8 +206,7 @@ static unsigned int combiner_lookup_irq(int group)
 
 static void __init combiner_init(void __iomem *combiner_base,
 				 struct device_node *np,
-				 unsigned int max_nr,
-				 int irq_base)
+				 unsigned int max_nr)
 {
 	int i, irq;
 	unsigned int nr_irq;
@@ -221,7 +220,7 @@ static void __init combiner_init(void __iomem *combiner_base,
 		return;
 	}
 
-	combiner_irq_domain = irq_domain_add_simple(np, nr_irq, irq_base,
+	combiner_irq_domain = irq_domain_add_linear(np, nr_irq,
 				&combiner_irq_domain_ops, combiner_data);
 	if (WARN_ON(!combiner_irq_domain)) {
 		pr_warning("%s: irq domain init failed\n", __func__);
@@ -248,7 +247,6 @@ static int __init combiner_of_init(struct device_node *np,
 {
 	void __iomem *combiner_base;
 	unsigned int max_nr = 20;
-	int irq_base = -1;
 
 	combiner_base = of_iomap(np, 0);
 	if (!combiner_base) {
@@ -262,14 +260,7 @@ static int __init combiner_of_init(struct device_node *np,
 			__func__, max_nr);
 	}
 
-	/* 
-	 * FIXME: This is a hardwired COMBINER_IRQ(0,0). Once all devices
-	 * get their IRQ from DT, remove this in order to get dynamic
-	 * allocation.
-	 */
-	irq_base = 160;
-
-	combiner_init(combiner_base, np, max_nr, irq_base);
+	combiner_init(combiner_base, np, max_nr);
 
 	return 0;
 }
-- 
1.7.9.5

[PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value

[Tomasz Figa]

Hi Chander,

On Monday 23 of September 2013 17:33:35 Chander Kashyap wrote:
> Replace irq_domain_add_simple with "irq_domain_add_linear" in order to
> use linear irq domain, and to remove hardcoded irq_base_value.
> 
> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
> ---
> Changes since v1:
> 	- Replaced irq_domain_add_simple with irq_domain_add_linear,
> 	  as suggested by Tomasz
> 
>  drivers/irqchip/exynos-combiner.c |   15 +++------------
>  1 file changed, 3 insertions(+), 12 deletions(-)

Reviewed-by: Tomasz Figa <t.figa@samsung.com>

Best regards,
Tomasz

[PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value

[Kukjin Kim]

Chander Kashyap wrote:
> 
> Replace irq_domain_add_simple with "irq_domain_add_linear" in order to use
> linear irq domain, and to remove hardcoded irq_base_value.
> 
> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
> ---
> Changes since v1:
> 	- Replaced irq_domain_add_simple with irq_domain_add_linear,
> 	  as suggested by Tomasz
> 
>  drivers/irqchip/exynos-combiner.c |   15 +++------------
>  1 file changed, 3 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-
> combiner.c
> index 4c68265..2551046 100644
> --- a/drivers/irqchip/exynos-combiner.c
> +++ b/drivers/irqchip/exynos-combiner.c
> @@ -206,8 +206,7 @@ static unsigned int combiner_lookup_irq(int group)
> 
>  static void __init combiner_init(void __iomem *combiner_base,
>  				 struct device_node *np,
> -				 unsigned int max_nr,
> -				 int irq_base)
> +				 unsigned int max_nr)
>  {
>  	int i, irq;
>  	unsigned int nr_irq;
> @@ -221,7 +220,7 @@ static void __init combiner_init(void __iomem
> *combiner_base,
>  		return;
>  	}
> 
> -	combiner_irq_domain = irq_domain_add_simple(np, nr_irq, irq_base,
> +	combiner_irq_domain = irq_domain_add_linear(np, nr_irq,
>  				&combiner_irq_domain_ops, combiner_data);
>  	if (WARN_ON(!combiner_irq_domain)) {
>  		pr_warning("%s: irq domain init failed\n", __func__);
> @@ -248,7 +247,6 @@ static int __init combiner_of_init(struct device_node
> *np,
>  {
>  	void __iomem *combiner_base;
>  	unsigned int max_nr = 20;
> -	int irq_base = -1;
> 
>  	combiner_base = of_iomap(np, 0);
>  	if (!combiner_base) {
> @@ -262,14 +260,7 @@ static int __init combiner_of_init(struct device_node
> *np,
>  			__func__, max_nr);
>  	}
> 
> -	/*
> -	 * FIXME: This is a hardwired COMBINER_IRQ(0,0). Once all devices
> -	 * get their IRQ from DT, remove this in order to get dynamic
> -	 * allocation.
> -	 */
> -	irq_base = 160;
> -
> -	combiner_init(combiner_base, np, max_nr, irq_base);
> +	combiner_init(combiner_base, np, max_nr);
> 
>  	return 0;
>  }
> --
> 1.7.9.5

Looks nice to me, applied with Tomasz's review.

Thanks,
Kukjin

[PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value

[Tomasz Figa]

Hi Kukjin,

On Thursday 26 of September 2013 14:05:09 Kukjin Kim wrote:
> Chander Kashyap wrote:
> > Replace irq_domain_add_simple with "irq_domain_add_linear" in order to
> > use linear irq domain, and to remove hardcoded irq_base_value.
> > 
> > Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
> > ---
> > 
> > Changes since v1:
> > 	- Replaced irq_domain_add_simple with irq_domain_add_linear,
> > 	
> > 	  as suggested by Tomasz
> >  
> >  drivers/irqchip/exynos-combiner.c |   15 +++------------
> >  1 file changed, 3 insertions(+), 12 deletions(-)
[snip]
> 
> Looks nice to me, applied with Tomasz's review.

I don't see this patch in your tree. Did you apply it in the end?

Best regards,
Tomasz

[PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value

[Kukjin Kim]

On 10/18/13 02:53, Tomasz Figa wrote:
> Hi Kukjin,
>
> On Thursday 26 of September 2013 14:05:09 Kukjin Kim wrote:
>> Chander Kashyap wrote:
>>> Replace irq_domain_add_simple with "irq_domain_add_linear" in order to
>>> use linear irq domain, and to remove hardcoded irq_base_value.
>>>
>>> Signed-off-by: Chander Kashyap<chander.kashyap@linaro.org>
>>> ---
>>>
>>> Changes since v1:
>>> 	- Replaced irq_domain_add_simple with irq_domain_add_linear,
>>> 	
>>> 	  as suggested by Tomasz
>>>
>>>   drivers/irqchip/exynos-combiner.c |   15 +++------------
>>>   1 file changed, 3 insertions(+), 12 deletions(-)
> [snip]
>>
>> Looks nice to me, applied with Tomasz's review.
>
> I don't see this patch in your tree. Did you apply it in the end?
>
Thanks for your gentle reminder.

Applied.
- Kukjin

[PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value

[Chander Kashyap]

Hi Kikjin,

On 21 October 2013 02:32, Kukjin Kim <kgene.kim@samsung.com> wrote:
> On 10/18/13 02:53, Tomasz Figa wrote:
>>
>> Hi Kukjin,
>>
>> On Thursday 26 of September 2013 14:05:09 Kukjin Kim wrote:
>>>
>>> Chander Kashyap wrote:
>>>>
>>>> Replace irq_domain_add_simple with "irq_domain_add_linear" in order to
>>>> use linear irq domain, and to remove hardcoded irq_base_value.
>>>>
>>>> Signed-off-by: Chander Kashyap<chander.kashyap@linaro.org>
>>>> ---
>>>>
>>>> Changes since v1:
>>>>         - Replaced irq_domain_add_simple with irq_domain_add_linear,
>>>>
>>>>           as suggested by Tomasz
>>>>
>>>>   drivers/irqchip/exynos-combiner.c |   15 +++------------
>>>>   1 file changed, 3 insertions(+), 12 deletions(-)
>>
>> [snip]
>>>
>>>
>>> Looks nice to me, applied with Tomasz's review.
>>
>>
>> I don't see this patch in your tree. Did you apply it in the end?
>>
> Thanks for your gentle reminder.

I still can not see these patches in yours branches ?

>
> Applied.
> - Kukjin



-- 
with warm regards,
Chander Kashyap

[PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value

[Kukjin Kim]

On 11/25/13 15:37, Chander Kashyap wrote:
> Hi Kikjin,
>
Hi Chander,

> On 21 October 2013 02:32, Kukjin Kim<kgene.kim@samsung.com>  wrote:
>> On 10/18/13 02:53, Tomasz Figa wrote:
>>>
>>> Hi Kukjin,
>>>
>>> On Thursday 26 of September 2013 14:05:09 Kukjin Kim wrote:
>>>>
>>>> Chander Kashyap wrote:
>>>>>
>>>>> Replace irq_domain_add_simple with "irq_domain_add_linear" in order to
>>>>> use linear irq domain, and to remove hardcoded irq_base_value.
>>>>>
>>>>> Signed-off-by: Chander Kashyap<chander.kashyap@linaro.org>
>>>>> ---
>>>>>
>>>>> Changes since v1:
>>>>>          - Replaced irq_domain_add_simple with irq_domain_add_linear,
>>>>>
>>>>>            as suggested by Tomasz
>>>>>
>>>>>    drivers/irqchip/exynos-combiner.c |   15 +++------------
>>>>>    1 file changed, 3 insertions(+), 12 deletions(-)
>>>
>>> [snip]
>>>>
>>>>
>>>> Looks nice to me, applied with Tomasz's review.
>>>
>>>
>>> I don't see this patch in your tree. Did you apply it in the end?
>>>
>> Thanks for your gentle reminder.
>
> I still can not see these patches in yours branches ?
>
Oops, sorry for missing. This should be queued in next.

Thanks.
Kukjin