From: o.rempel@pengutronix.de (Oleksij Rempel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property
Date: Mon, 30 Jul 2018 10:03:29 +0200 [thread overview]
Message-ID: <02f4b642-14a8-f2db-ea23-c42a4f6f1652@pengutronix.de> (raw)
In-Reply-To: <DB6PR04MB32239840E3DF12328A3E7E47892A0@DB6PR04MB3223.eurprd04.prod.outlook.com>
On 27.07.2018 10:58, Robin Gong wrote:
>
>
>> -----Original Message-----
>> From: Lucas Stach [mailto:l.stach at pengutronix.de]
>> Sent: 2018?7?27? 16:30
>> To: Robin Gong <yibin.gong@nxp.com>; Oleksij Rempel
>> <o.rempel@pengutronix.de>; Shawn Guo <shawnguo@kernel.org>; Mark
>> Brown <broonie@kernel.org>; Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>> Cc: Mark Rutland <mark.rutland@arm.com>; devicetree at vger.kernel.org;
>> Michael Turquette <mturquette@baylibre.com>; Stephen Boyd
>> <sboyd@codeaurora.org>; linux-kernel at vger.kernel.org; Liam Girdwood
>> <lgirdwood@gmail.com>; Rob Herring <robh+dt@kernel.org>; dl-linux-imx
>> <linux-imx@nxp.com>; kernel at pengutronix.de; A.s. Dong
>> <aisheng.dong@nxp.com>; Fabio Estevam <fabio.estevam@nxp.com>; Russell
>> King <linux@armlinux.org.uk>; Andrew Morton <akpm@linux-foundation.org>;
>> Leonard Crestez <leonard.crestez@nxp.com>; linux-clk at vger.kernel.org;
>> linux-arm-kernel at lists.infradead.org
>> Subject: Re: [PATCH v8 1/6] ARM: imx6q: provide documentation for new
>> fsl,pmic-stby-poweroff property
>>
>> Hi Robin,
>>
>> Am Freitag, den 27.07.2018, 01:51 +0000 schrieb Robin Gong:
>> [...]
>>>>>> ---
>>>>>> ?Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8
>>>>>> ++++++++
>>>>>> ?1 file changed, 8 insertions(+)
>>>>>>
>>>>>> diff --git
>>>>>> a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
>>>>>> b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
>>>>>> index a45ca67a9d5f..e1308346e00d 100644
>>>>>> --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
>>>>>> +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
>>>>>> @@ -6,6 +6,14 @@ Required properties:
>>>>>> ?- interrupts: Should contain CCM interrupt
>>>>>> ?- #clock-cells: Should be <1>
>>>>>>
>>>>>> +Optional properties:
>>>>>> +- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ
>>>>>> +signal
>>>>>> +??on power off.
>>>>>> +??Use this property if the SoC should be powered off by
>>>>>> +external power
>>>>>> +??management IC (PMIC) triggered via PMIC_STBY_REQ signal.
>>>>>
>>>>> PMIC_ON_REQ didn't connect to any pin of PMIC in your case?
>>>>
>>>> No. First, it was only one customer specific issue. After some
>>>> research I found even publicly available boards (for example
>>>> RioTboard) which has same/similar design. After seeing this in imx6
>>>> documentation as valid power off way, I have no doubts - there should be
>> even more devices doin this in the wild.
>>>
>>> Not sure why the customer didn't follow reference design, since
>>> PMIC_ON_REQ can provide power off/on feature by pressing ONOFF key
>>> which connected ONOFF pin of i.mx6(ONOFF will toggle PMIC_ON_REQ to
>>> power off/on PMIC). The official power off/on way (PMIC_ON_REQ) can
>>> also power off all power rails of PFUZE except snvs as your patch did
>>> on PMIC_STBY_REQ.??PMIC_STBY_REQ is used to notify pmic switch power
>>> mode (PFM/APS) or decrease voltage to save power in kernel suspend, not
>> power off....I am not sure if we need this patchset to 'workaround' the board
>> issue.
>>>
>> Not all boards follow the reference design, that's a fact of life.
>>
>> Please look at the i.MX6Q reference manual. The sequence implemented in this
>> patchset can be found as a valid way to power off the system in
>> "60.4.3 Power mode transitions" "Normal ON to OFF with external PMIC", so
>> there is hardly any way to argue that this is a board specific quirk. This is one of
>> the Freescale/NXP recommended sequences to turn off the system.
> Okay, but could you add one more comment for this solution? RTC alarm and ONOFF
> Button wakeup feature can't be support in this case.
Enough to add it in to changelog? or should it go to the binding
documentation?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180730/20996431/attachment.sig>
next prev parent reply other threads:[~2018-07-30 8:03 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-26 9:22 [PATCH v8 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
2018-07-26 9:22 ` [PATCH v8 1/6] ARM: imx6q: provide documentation for new fsl, pmic-stby-poweroff property Oleksij Rempel
2018-07-26 9:51 ` [PATCH v8 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property Robin Gong
2018-07-26 11:37 ` Oleksij Rempel
2018-07-27 1:51 ` Robin Gong
2018-07-27 8:30 ` Lucas Stach
2018-07-27 8:58 ` Robin Gong
2018-07-27 9:06 ` Oleksij Rempel
2018-07-30 8:03 ` Oleksij Rempel [this message]
2018-08-06 2:34 ` Robin Gong
2018-08-06 16:49 ` Lucas Stach
2018-07-27 8:41 ` Oleksij Rempel
2018-07-26 9:22 ` [PATCH v8 2/6] ARM: imx6: register pm_power_off handler if "fsl, pmic-stby-poweroff" is set Oleksij Rempel
2018-07-27 9:15 ` [PATCH v8 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" " Robin Gong
2018-07-30 7:57 ` Oleksij Rempel
2018-07-26 9:22 ` [PATCH v8 3/6] kernel/reboot.c: export pm_power_off_prepare Oleksij Rempel
2018-07-26 9:22 ` [PATCH v8 4/6] regulator: pfuze100: add fsl, pmic-stby-poweroff property Oleksij Rempel
2018-07-26 9:22 ` [PATCH v8 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler Oleksij Rempel
2018-07-27 9:32 ` Robin Gong
2018-07-30 7:50 ` Oleksij Rempel
2018-07-30 10:24 ` Mark Brown
2018-08-02 8:11 ` Oleksij Rempel
2018-08-02 8:16 ` Oleksij Rempel
2018-08-06 2:51 ` Robin Gong
2018-07-26 9:22 ` [PATCH v8 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option Oleksij Rempel
2018-07-27 9:33 ` Robin Gong
2018-07-30 7:58 ` Oleksij Rempel
2018-08-02 8:37 ` Oleksij Rempel
2018-07-26 9:48 ` [PATCH v8 0/6] provide power off support for iMX6 with external PMIC Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=02f4b642-14a8-f2db-ea23-c42a4f6f1652@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).