From: Krzysztof Kozlowski <krzk@kernel.org>
To: Taniya Das <quic_tdas@quicinc.com>,
Taniya Das <taniya.das@oss.qualcomm.com>,
Bjorn Andersson <andersson@kernel.org>,
linux-arm-msm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Ajit Pandey <ajit.pandey@oss.qualcomm.com>,
Imran Shaik <imran.shaik@oss.qualcomm.com>,
Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: defconfig: Change CONFIG_SM_TCSRCC_8750 from m to y
Date: Fri, 17 Oct 2025 07:56:27 +0200 [thread overview]
Message-ID: <03ac36fb-a227-438e-bdf6-f787e26008b3@kernel.org> (raw)
In-Reply-To: <38b8468f-5006-46a3-a4ea-28e6692ef14a@quicinc.com>
On 17/10/2025 07:49, Taniya Das wrote:
>
>
> On 10/17/2025 10:51 AM, Krzysztof Kozlowski wrote:
>> On 17/10/2025 07:16, Taniya Das wrote:
>>>
>>>
>>> On 10/17/2025 10:00 AM, Krzysztof Kozlowski wrote:
>>>> On 16/10/2025 20:53, Taniya Das wrote:
>>>>> The TCSR clock controller is required during boot to provide the ref
>>>>> clocks to the UFS controller. Setting CONFIG_SM_TCSRCC_8750 to y ensures
>>>>> the UFS driver successfully probe and initialize the device.
>>>>>
>>>>> Without this change, the UFS subsystem fails to mount as a usable file
>>>>> system during boot.
>>>>
>>>>
>>>> That's not what I observed. UFS works fine, especially that it is a
>>>> module, so no, this is not a desired change and explanation is not only
>>>> insufficient but actually incorrect.
>>>>
>>>
>>> Krzysztof, on Pakala MTP we are observing the below issue and it
>>> requires the module of tscrcc to be loaded explicitly. This patch also
>>> aligns to how it is on all other targets.
>>>
>>> /soc@0/phy@1d80000: Failed to get clk index: 2 ret: -517
>>> [ 10.496570] ufshcd-qcom 1d84000.ufs: freq-table-hz property not specified
>>> [ 10.503660] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
>>> find vdd-hba-supply regulator, assuming enabled
>>> [ 10.514548] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
>>> find vccq2-supply regulator, assuming enabled
>>> [ 10.565955] platform 1d80000.phy: deferred probe pending: (reason
>>> unknown)
>>> [ 10.573078] platform 1d84000.ufs: deferred probe pending:
>>> ufshcd-qcom: ufshcd_pltfrm_init() failed
>>>
>>
>>
>> I don't and I am testing regularly, so I assume you have incorrect
>> config. Maybe I have incorrect one (which works), but then commit msg is
>> incomplete - you must explain the bug and provide proof that this is the
>> correct fix for it.
>>
>
> We have tried booting up recently and and that is what we observed. The
> patch from 'm' to 'y' helps the UFS probe is successful and the rootfs
> is picked from ufs partitions. I will add these fail & success log
> snippets in the commit text.
That's not enough. You need to explain why UFS fails. After explaining
this, I guess bug in UFS would be exposed thus that one should be fixed.
You just provided band-aid without fixing the real problem.
NAK
>
> [ 0.000000] Machine model: Qualcomm Technologies, Inc. SM8750 MTP
> ....
> [ 3.133373] ufshcd-qcom 1d84000.ufs: freq-table-hz property not specified
> [ 3.144480] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
> find vdd-hba-supply regulator, assuming enabled
> [ 3.144585] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
> find vccq2-supply regulator, assuming enabled
> [ 3.227770] ufshcd-qcom 1d84000.ufs: Resource ufs_mem not provided
> [ 3.238319] ufshcd-qcom 1d84000.ufs: MCQ mode is disabled, err=-19
Best regards,
Krzysztof
next prev parent reply other threads:[~2025-10-17 5:56 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-16 18:53 [PATCH] arm64: defconfig: Change CONFIG_SM_TCSRCC_8750 from m to y Taniya Das
2025-10-17 4:30 ` Krzysztof Kozlowski
2025-10-17 5:16 ` Taniya Das
2025-10-17 5:21 ` Krzysztof Kozlowski
2025-10-17 5:49 ` Taniya Das
2025-10-17 5:56 ` Krzysztof Kozlowski [this message]
2025-10-17 6:54 ` Krzysztof Kozlowski
2025-10-17 6:57 ` Taniya Das
2025-10-17 7:37 ` Krzysztof Kozlowski
2025-10-17 8:15 ` Konrad Dybcio
2025-10-17 8:34 ` Krzysztof Kozlowski
2025-10-17 6:55 ` Taniya Das
2025-10-17 7:36 ` Krzysztof Kozlowski
2025-10-17 21:47 ` Bjorn Andersson
2025-10-17 21:41 ` Bjorn Andersson
2025-10-21 9:12 ` Taniya Das
2025-10-19 11:57 ` Dmitry Baryshkov
2025-10-21 9:15 ` Taniya Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03ac36fb-a227-438e-bdf6-f787e26008b3@kernel.org \
--to=krzk@kernel.org \
--cc=ajit.pandey@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=imran.shaik@oss.qualcomm.com \
--cc=jagadeesh.kona@oss.qualcomm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_tdas@quicinc.com \
--cc=taniya.das@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox