[PATCH v2 2/2] tty: serial: samsung: Clean-up selection of number of available UARTs

[kgene@kernel.org (Kukjin Kim)]

Abhilash Kesavan wrote:
> 
Hi,

Sorry for late response.

> Remove symbols SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS which
> select the number of UART ports available on the SoC. Replace the usage
> of SERIAL_SAMSUNG_UARTS in the serial driver with the maximum number of

Well, as you know the number of uart ports are different on each Samsung SoCs
so I don't think just using maximum number of uart ports are possible for new
exynos7 SoC at this moment.

> UART ports possible. Removal of these symbols also helps in Exynos7
> serial enablement.
> 
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/tty/serial/Kconfig   |   16 ----------------
>  drivers/tty/serial/samsung.c |   11 +++--------
>  drivers/tty/serial/samsung.h |    5 ++++-
>  3 files changed, 7 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 81f6ee7..9fc9092 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -247,22 +247,6 @@ config SERIAL_SAMSUNG
>  	  provide all of these ports, depending on how the serial port
>  	  pins are configured.
> 
> -config SERIAL_SAMSUNG_UARTS_4
> -	bool
> -	depends on PLAT_SAMSUNG
> -	default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
> -	help
> -	  Internal node for the common case of 4 Samsung compatible UARTs
> -
> -config SERIAL_SAMSUNG_UARTS
> -	int
> -	depends on PLAT_SAMSUNG
> -	default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
> -	default 3
> -	help
> -	  Select the number of available UART ports for the Samsung S3C
> -	  serial driver
> -
>  config SERIAL_SAMSUNG_DEBUG
>  	bool "Samsung SoC serial debug"
>  	depends on SERIAL_SAMSUNG && DEBUG_LL
> diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
> index c78f43a..ba04c6d 100644
> --- a/drivers/tty/serial/samsung.c
> +++ b/drivers/tty/serial/samsung.c
> @@ -962,14 +962,14 @@ static struct uart_ops s3c24xx_serial_ops = {
>  static struct uart_driver s3c24xx_uart_drv = {
>  	.owner		= THIS_MODULE,
>  	.driver_name	= "s3c2410_serial",
> -	.nr		= CONFIG_SERIAL_SAMSUNG_UARTS,
> +	.nr		= MAX_SAMSUNG_UARTS,
>  	.cons		= S3C24XX_SERIAL_CONSOLE,
>  	.dev_name	= S3C24XX_SERIAL_NAME,
>  	.major		= S3C24XX_SERIAL_MAJOR,
>  	.minor		= S3C24XX_SERIAL_MINOR,
>  };
> 
> -static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
> +static struct s3c24xx_uart_port s3c24xx_serial_ports[MAX_SAMSUNG_UARTS] = {
>  	[0] = {
>  		.port = {
>  			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
> @@ -992,8 +992,6 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
>  			.line		= 1,
>  		}
>  	},
> -#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
> -
>  	[2] = {
>  		.port = {
>  			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
> @@ -1005,8 +1003,6 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
>  			.line		= 2,
>  		}
>  	},
> -#endif
> -#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
>  	[3] = {
>  		.port = {
>  			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock),
> @@ -1018,7 +1014,6 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
>  			.line		= 3,
>  		}
>  	}
> -#endif
>  };
> 
>  /* s3c24xx_serial_resetport
> @@ -1590,7 +1585,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
> 
>  	/* is this a valid port */
> 
> -	if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
> +	if (co->index == -1 || co->index >= MAX_SAMSUNG_UARTS)

If we use max number, second condition is not required...

>  		co->index = 0;
> 
>  	port = &s3c24xx_serial_ports[co->index].port;
> diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
> index eb071dd..484b49e 100644
> --- a/drivers/tty/serial/samsung.h
> +++ b/drivers/tty/serial/samsung.h
> @@ -1,6 +1,9 @@
>  #ifndef __SAMSUNG_H
>  #define __SAMSUNG_H
> 
> +/* Maximum UART ports available */
> +#define MAX_SAMSUNG_UARTS       4

If there is a Samsung SoC having 5 UARTS, we need to update?

And hmm...maybe we need to keep the useless array sometimes...

> +
>  /*
>   * Driver for Samsung SoC onboard UARTs.
>   *
> @@ -38,7 +41,7 @@ struct s3c24xx_uart_info {
>  struct s3c24xx_serial_drv_data {
>  	struct s3c24xx_uart_info	*info;
>  	struct s3c2410_uartcfg		*def_cfg;
> -	unsigned int			fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
> +	unsigned int			fifosize[MAX_SAMSUNG_UARTS];
>  };
> 
>  struct s3c24xx_uart_port {
> --
> 1.7.9.5