RE: [PATCH v4 1/4] dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings

["sunyeal.hong" <sunyeal.hong@samsung.com>]

Hello Krzysztof,

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: Thursday, July 25, 2024 3:41 PM
> To: sunyeal.hong <sunyeal.hong@samsung.com>; 'Rob Herring'
> <robh@kernel.org>
> Cc: 'Sylwester Nawrocki' <s.nawrocki@samsung.com>; 'Chanwoo Choi'
> <cw00.choi@samsung.com>; 'Alim Akhtar' <alim.akhtar@samsung.com>; 'Michael
> Turquette' <mturquette@baylibre.com>; 'Stephen Boyd' <sboyd@kernel.org>;
> 'Conor Dooley' <conor+dt@kernel.org>; linux-samsung-soc@vger.kernel.org;
> linux-clk@vger.kernel.org; devicetree@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v4 1/4] dt-bindings: clock: add ExynosAuto v920 SoC
> CMU bindings
> 
> On 25/07/2024 08:37, Krzysztof Kozlowski wrote:
> >>   then:
> >>     properties:
> >>       clocks:
> >>         items:
> >>           - description: External reference clock (38.4 MHz)
> >>           - description: CMU_MISC NOC clock (from CMU_MISC)
> >>
> >>       clock-names:
> >>         items:
> >>           - const: oscclk
> >>           - const: noc
> >>
> >> If there is anything I misunderstand, please guide me.
> >>
> >
> > You did not address my questions at all instead just copied again the
> > same. It is not how it works.
> >
> > I am not going to discuss like this.
> 
> And in case it is still unclear - just look at your bindings and DTS.
> They say you have three clocks!
> 
> Best regards,
> Krzysztof
> 

Let me answer your questions first.
In the existing V4 patch, clock items were declared in if then for each block, so there was no problem.
If modified according to Rob's comment, problems may occur as the input clock is configured differently for each block.

I think it would be better to keep the bindings in v4 patch form like the existing exynos models.

Thanks for your comment.

Best regards,
Sunyeal