From mboxrd@z Thu Jan 1 00:00:00 1970 From: alanbutty12@gmail.com (Alan M Butler) Date: Fri, 17 Aug 2012 10:56:14 +0100 Subject: [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler In-Reply-To: References: Message-ID: <05c3c186d3675cde472bcc3a01198b6726c48a3c.1345196553.git.alanbutty12@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org --- arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 105 +++++++++++++++++++++++++ arch/arm/mach-kirkwood/Kconfig | 7 ++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/Makefile.boot | 1 + arch/arm/mach-kirkwood/board-dt.c | 4 + arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 79 +++++++++++++++++++ arch/arm/mach-kirkwood/common.h | 6 ++ 7 files changed, 203 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts create mode 100644 arch/arm/mach-kirkwood/board-iomega_ix2_200.c diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts new file mode 100644 index 0000000..821a76b --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Iomega StorCenter ix2-200"; + compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk coherent_pool=1M"; + }; + + ocp at f1000000 { + i2c at 11000 { + status = "okay"; + + lm63: lm63 at 4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; + + serial at 12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand at 3000000 { + status = "okay"; + + partition at 0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition at a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition at 100000 { + label = "uImage"; + reg = <0x100000 0x300000>; + }; + + partition at 400000 { + label = "uInitrd"; + reg = <0x540000 0x1000000>; + }; + }; + sata at 80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:white:power_led"; + gpios = <&gpio0 16 0>; + linux,default-trigger = "default-on"; + }; + health_led1 { + label = "status:red:health_led"; + gpios = <&gpio1 5 0>; + }; + health_led2 { + label = "status:white:health_led"; + gpios = <&gpio1 4 0>; + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 15 0>; + }; + }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + Power { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio0 14 1>; + }; + Reset { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + }; + OTB { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + }; + }; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index ca5c15a..bee8451 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -195,6 +195,13 @@ config MACH_T5325 Say 'Y' here if you want your kernel to support the HP t5325 Thin Client. +config MACH_IOMEGA_IX2_200_DT + bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Iomega StorCenter ix2-200 (Flattened Device Tree). + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 055c85a..f5484dc 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o +obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 2a576ab..f8ef771 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -11,3 +11,4 @@ dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e4eb450..9b3ec17 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -87,6 +87,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("buffalo,lsxl")) lsxl_init(); + if (of_machine_is_compatible("iom,ix2-200")) + iomega_ix2_200_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -100,6 +103,7 @@ static const char *kirkwood_dt_board_compat[] = { "qnap,ts219", "seagate,goflexnet", "buffalo,lsxl", + "iom,ix2-200", NULL }; diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c new file mode 100644 index 0000000..0c78752 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -0,0 +1,79 @@ +/* + * arch/arm/mach-kirkwood/board-iomega_ix2_200.c + * + * Iomega StorCenter ix2-200 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(11), +}; + +static unsigned int iomega_ix2_200_mpp_config[] __initdata = { + MPP12_GPIO, /* Reset Button */ + MPP14_GPIO, /* Power Button */ + MPP15_GPIO, /* Backup LED (blue) */ + MPP16_GPIO, /* Power LED (white) */ + MPP35_GPIO, /* OTB Button */ + MPP36_GPIO, /* Rebuild LED (white) */ + MPP37_GPIO, /* Health LED (red) */ + MPP38_GPIO, /* SATA LED brightness control 1 */ + MPP39_GPIO, /* SATA LED brightness control 2 */ + MPP40_GPIO, /* Backup LED brightness control 1 */ + MPP41_GPIO, /* Backup LED brightness control 2 */ + MPP42_GPIO, /* Power LED brightness control 1 */ + MPP43_GPIO, /* Power LED brightness control 2 */ + MPP44_GPIO, /* Health LED brightness control 1 */ + MPP45_GPIO, /* Health LED brightness control 2 */ + MPP46_GPIO, /* Rebuild LED brightness control 1 */ + MPP47_GPIO, /* Rebuild LED brightness control 2 */ + 0 +}; + +void __init iomega_ix2_200_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(iomega_ix2_200_mpp_config); + + kirkwood_ehci_init(); + + kirkwood_ge00_init(&iomega_ix2_200_ge00_data); + kirkwood_ge01_init(&iomega_ix2_200_ge01_data); +} +static int __init iomega_ix2_200_pci_init(void) +{ + if (of_machine_is_compatible("iom,ix2-200")) + kirkwood_pcie_init(KW_PCIE0); + return 0; +} +subsys_initcall(iomega_ix2_200_pci_init); + diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 304dd1a..d5d4064 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -94,6 +94,12 @@ void lsxl_init(void); static inline void lsxl_init(void) {}; #endif +#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT +void iomega_ix2_200_init(void); +#else +static inline void iomega_ix2_200_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); Signed-off-by: Alan M Butler -- 1.7.5.4