From mboxrd@z Thu Jan 1 00:00:00 1970 From: matthias.bgg@gmail.com (Matthias Brugger) Date: Mon, 19 Mar 2018 00:50:01 +0100 Subject: [PATCH v1 10/19] arm: dts: mt7623: remove useless property pinctrl-names at node switch@0 In-Reply-To: <9c8c23657d9812e24c6f07b7477a6ac0ebdd1c68.1519378872.git.sean.wang@mediatek.com> References: <9c8c23657d9812e24c6f07b7477a6ac0ebdd1c68.1519378872.git.sean.wang@mediatek.com> Message-ID: <06ea08cd-0b31-49e4-0008-df9933c709cb@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 02/23/2018 11:16 AM, sean.wang at mediatek.com wrote: > From: Sean Wang > > The property pinctrl-names is totally superfluous. It would be good to > remove the property to keep the node neatness. There is actually > unnecessary to set up any pins for data path TRGMII between main SoC and > MT7530. Furthermore, it's more reasonable for the pin setup of control > path MDIO bus is being placed inside the node of ethernet controller. > > Signed-off-by: Sean Wang Pushed to v4.16-next/dts32 Thanks! > --- > arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts > index 6b760be..f2d3cfb 100644 > --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts > +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts > @@ -151,7 +151,6 @@ > #address-cells = <1>; > #size-cells = <0>; > reg = <0>; > - pinctrl-names = "default"; > reset-gpios = <&pio 33 0>; > core-supply = <&mt6323_vpa_reg>; > io-supply = <&mt6323_vemc3v3_reg>; >