public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Robin Murphy <robin.murphy@arm.com>
To: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, iommu@lists.linux.dev,
	will@kernel.org, joro@8bytes.org
Cc: jean-philippe@linaro.org, darren@os.amperecomputing.com,
	scott@os.amperecomputing.com
Subject: Re: [PATCH] iommu/arm-smmu-v3: Enable PCI ATS in passthrough mode as well
Date: Thu, 2 Feb 2023 13:22:07 +0000	[thread overview]
Message-ID: <0833e426-d03d-b856-3cb3-8fe97adbb8c1@arm.com> (raw)
In-Reply-To: <20230202124053.848792-1-gankulkarni@os.amperecomputing.com>

On 2023-02-02 12:40, Ganapatrao Kulkarni wrote:
> The current smmu-v3 driver does not enable PCI ATS for physical functions
> of ATS capable End Points when booted in smmu bypass mode
> (iommu.passthrough=1). This will not allow virtual functions to enable
> ATS(even though EP supports it) while they are attached to a VM using
> VFIO driver.
> 
> This patch adds changes to enable ATS support for physical functions
> in passthrough/bypass mode as well.
> 
> Also, adding check to avoid disabling of ATS if it is not enabled,
> to avoid unnecessary call-traces.
> 
> Signed-off-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
> ---
>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 10 +++++++---
>   1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> index 6d5df91c5c46..5a605cb5ccef 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> @@ -2313,11 +2313,16 @@ static void arm_smmu_enable_ats(struct arm_smmu_master *master)
>   static void arm_smmu_disable_ats(struct arm_smmu_master *master)
>   {
>   	struct arm_smmu_domain *smmu_domain = master->domain;
> +	struct pci_dev *pdev;
>   
>   	if (!master->ats_enabled)
>   		return;
>   
> -	pci_disable_ats(to_pci_dev(master->dev));
> +	pdev = to_pci_dev(master->dev);
> +
> +	if (pdev->ats_enabled)

If the master->ats_enabled check above passes when ATS isn't actually 
enabled, surely that's a bug?

Robin.

> +		pci_disable_ats(pdev);
> +
>   	/*
>   	 * Ensure ATS is disabled at the endpoint before we issue the
>   	 * ATC invalidation via the SMMU.
> @@ -2453,8 +2458,7 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
>   
>   	master->domain = smmu_domain;
>   
> -	if (smmu_domain->stage != ARM_SMMU_DOMAIN_BYPASS)
> -		master->ats_enabled = arm_smmu_ats_supported(master);
> +	master->ats_enabled = arm_smmu_ats_supported(master);
>   
>   	arm_smmu_install_ste_for_dev(master);
>   

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-02-02 13:23 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-02 12:40 [PATCH] iommu/arm-smmu-v3: Enable PCI ATS in passthrough mode as well Ganapatrao Kulkarni
2023-02-02 13:22 ` Robin Murphy [this message]
2023-02-03 10:44   ` Ganapatrao Kulkarni
2023-02-03 12:12     ` Robin Murphy
2023-02-03 12:00 ` Jean-Philippe Brucker
2023-02-03 12:05   ` Will Deacon
2023-02-06 17:20   ` Ganapatrao Kulkarni
2023-02-06 19:45     ` Jean-Philippe Brucker
2023-02-07  9:50       ` Ganapatrao Kulkarni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0833e426-d03d-b856-3cb3-8fe97adbb8c1@arm.com \
    --to=robin.murphy@arm.com \
    --cc=darren@os.amperecomputing.com \
    --cc=gankulkarni@os.amperecomputing.com \
    --cc=iommu@lists.linux.dev \
    --cc=jean-philippe@linaro.org \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=scott@os.amperecomputing.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox