From: "Alim Akhtar" <alim.akhtar@samsung.com>
To: "'Rob Herring'" <robh+dt@kernel.org>
Cc: "'linux-arm-kernel'" <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, "'SoC Team'" <soc@kernel.org>,
"'linux-clk'" <linux-clk@vger.kernel.org>,
<devicetree@vger.kernel.org>, "'Olof Johansson'" <olof@lixom.net>,
"'Linus Walleij'" <linus.walleij@linaro.org>,
"'Catalin Marinas'" <catalin.marinas@arm.com>,
"'Krzysztof Kozlowski'" <krzysztof.kozlowski@canonical.com>,
"'Sylwester Nawrocki'" <s.nawrocki@samsung.com>,
"'linux-samsung-soc'" <linux-samsung-soc@vger.kernel.org>,
"'Pankaj Dubey'" <pankaj.dubey@samsung.com>,
<linux-fsd@tesla.com>, "'Arjun K V'" <arjun.kv@samsung.com>,
"'Aswani Reddy'" <aswani.reddy@samsung.com>,
"'Ajay Kumar'" <ajaykumar.rs@samsung.com>,
"'Sriranjani P'" <sriranjani.p@samsung.com>,
"'Chandrasekar R'" <rcsekar@samsung.com>,
"'Shashank Prashar'" <s.prashar@samsung.com>
Subject: RE: [PATCH 14/23] arm64: dts: fsd: Add initial device tree support
Date: Sat, 15 Jan 2022 21:01:24 +0530 [thread overview]
Message-ID: <08ba01d80a24$f79a88f0$e6cf9ad0$@samsung.com> (raw)
In-Reply-To: <CAL_JsqKDbzy8y61Oj8Ey++atoMn1HYPyDZRc_cJQCe_tfkDGxQ@mail.gmail.com>
>-----Original Message-----
>From: Rob Herring [mailto:robh+dt@kernel.org]
>Sent: Friday, January 14, 2022 8:16 AM
>To: Alim Akhtar <alim.akhtar@samsung.com>
>Cc: linux-arm-kernel <linux-arm-kernel@lists.infradead.org>; linux-
>kernel@vger.kernel.org; SoC Team <soc@kernel.org>; linux-clk <linux-
>clk@vger.kernel.org>; devicetree@vger.kernel.org; Olof Johansson
><olof@lixom.net>; Linus Walleij <linus.walleij@linaro.org>; Catalin Marinas
><catalin.marinas@arm.com>; Krzysztof Kozlowski
><krzysztof.kozlowski@canonical.com>; Sylwester Nawrocki
><s.nawrocki@samsung.com>; linux-samsung-soc <linux-samsung-
>soc@vger.kernel.org>; Pankaj Dubey <pankaj.dubey@samsung.com>; linux-
>fsd@tesla.com; Arjun K V <arjun.kv@samsung.com>; Aswani Reddy
><aswani.reddy@samsung.com>; Ajay Kumar <ajaykumar.rs@samsung.com>;
>Sriranjani P <sriranjani.p@samsung.com>; Chandrasekar R
><rcsekar@samsung.com>; Shashank Prashar <s.prashar@samsung.com>
>Subject: Re: [PATCH 14/23] arm64: dts: fsd: Add initial device tree support
>
>On Thu, Jan 13, 2022 at 6:24 AM Alim Akhtar <alim.akhtar@samsung.com>
>wrote:
>>
>> Add initial device tree support for "Full Self-Driving" (FSD) SoC This
>> SoC contain three clusters of four cortex-a72 CPUs and various
>> peripheral IPs.
>
>Please make sure you run this thru 'make dtbs_check'. Fix schema warnings as
>much as possible and all dtc warnings. If shared with Samsung, there's
>probably a bit still missing. I see several warnings so I won't bother manually
>reporting them here.
>
Thanks Rob for review, let me fix them in patch set v2.
>> Cc: linux-fsd@tesla.com
>> Signed-off-by: Arjun K V <arjun.kv@samsung.com>
>> Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
>> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
>> Signed-off-by: Chandrasekar R <rcsekar@samsung.com>
>> Signed-off-by: Shashank Prashar <s.prashar@samsung.com>
>> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
>> ---
>> MAINTAINERS | 8 +
>> arch/arm64/Kconfig.platforms | 6 +
>> arch/arm64/boot/dts/Makefile | 1 +
>> arch/arm64/boot/dts/tesla/Makefile | 3 +
>> arch/arm64/boot/dts/tesla/fsd.dts | 140 ++++++
>> arch/arm64/boot/dts/tesla/fsd.dtsi | 715
>+++++++++++++++++++++++++++++
>> 6 files changed, 873 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/tesla/Makefile
>> create mode 100644 arch/arm64/boot/dts/tesla/fsd.dts create mode
>> 100644 arch/arm64/boot/dts/tesla/fsd.dtsi
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS index
>> fb18ce7168aa..02d56909c5e2 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -2726,6 +2726,14 @@ S: Maintained
>> F: Documentation/devicetree/bindings/media/tegra-cec.txt
>> F: drivers/media/cec/platform/tegra/
>>
>> +ARM/TESLA FSD SoC SUPPORT
>> +M: Alim Akhtar <alim.akhtar@samsung.com>
>> +M: linux-fsd@tesla.com
>> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
>> +L: linux-samsung-soc@vger.kernel.org
>> +S: Maintained
>> +F: arch/arm64/boot/dts/tesla*
>> +
>> ARM/TETON BGA MACHINE SUPPORT
>> M: "Mark F. Brown" <mark.brown314@gmail.com>
>> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
>> diff --git a/arch/arm64/Kconfig.platforms
>> b/arch/arm64/Kconfig.platforms index 54e3910e8b9b..bb8a047c2359 100644
>> --- a/arch/arm64/Kconfig.platforms
>> +++ b/arch/arm64/Kconfig.platforms
>> @@ -267,6 +267,12 @@ config ARCH_TEGRA
>> help
>> This enables support for the NVIDIA Tegra SoC family.
>>
>> +config ARCH_TESLA_FSD
>> + bool "ARMv8 based Tesla platform"
>> + select ARCH_EXYNOS
>> + help
>> + Support for ARMv8 based Tesla platforms.
>> +
>> config ARCH_SPRD
>> bool "Spreadtrum SoC platform"
>> help
>> diff --git a/arch/arm64/boot/dts/Makefile
>> b/arch/arm64/boot/dts/Makefile index 639e01a4d855..1ba04e31a438
>100644
>> --- a/arch/arm64/boot/dts/Makefile
>> +++ b/arch/arm64/boot/dts/Makefile
>> @@ -27,6 +27,7 @@ subdir-y += rockchip subdir-y += socionext
>> subdir-y += sprd subdir-y += synaptics
>> +subdir-y += tesla
>> subdir-y += ti
>> subdir-y += toshiba
>> subdir-y += xilinx
>> diff --git a/arch/arm64/boot/dts/tesla/Makefile
>> b/arch/arm64/boot/dts/tesla/Makefile
>> new file mode 100644
>> index 000000000000..a9818cda6b08
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/tesla/Makefile
>> @@ -0,0 +1,3 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +dtb-$(CONFIG_ARCH_TESLA_FSD) += \
>> + fsd.dtb
>> diff --git a/arch/arm64/boot/dts/tesla/fsd.dts
>> b/arch/arm64/boot/dts/tesla/fsd.dts
>> new file mode 100644
>> index 000000000000..e9bbd3284de9
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/tesla/fsd.dts
>> @@ -0,0 +1,140 @@
>> +// SPDX-License-Identifier: GPL-2.0
>
>Dual license dts files please.
>
>> +/*
>> + * Tesla FSD board device tree source
>> + *
>> + * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
>> + * https://www.samsung.com
>> + * Copyright (c) 2017-2021 Tesla, Inc.
>> + * https://www.tesla.com
>> + */
>> +
>> +/dts-v1/;
>> +#include "fsd.dtsi"
>> +
>> +/ {
>> + model = "Tesla Full Self-Driving (FSD) SoC";
>> + compatible = "tesla,fsd";
>> +
>> + aliases {
>> + serial0 = &serial_0;
>> + serial1 = &serial_1;
>> + };
>> +
>> + chosen {
>> + stdout-path = &serial_0;
>
>> + linux,initrd-start = <0xE0000000>;
>> + linux,initrd-end = <0xE4F00000>;
>
>Bootloaders set these.
>
>> + bootargs = "console=ttySAC0,115200n8
>
>Not needed with stdout-path.
>
>> + earlycon=exynos4210,0x14180000 root=/dev/ram0
>
>earlycon is a debug option.
>
>> + init=/linuxrc";
>
>init and rootfs are user settings.
>
>> + };
>> +
>> + memory@80000000 {
>> + device_type = "memory";
>> + reg = <0x0 0x80000000 0x2 0x00000000>;
>> + };
>> +};
>> +
>> +&fin_pll {
>> + clock-frequency = <24000000>;
>> +};
>> +
>> +&serial_0 {
>> + status = "okay";
>> +};
>> +
>> +&serial_1 {
>> + status = "okay";
>> +};
>> +
>> +&clock_cmu {
>> + status = "okay";
>> +};
>> +
>> +&clock_imem {
>> + status = "okay";
>> +};
>> +
>> +&clock_peric {
>> + status = "okay";
>> +};
>> +
>> +&smmu_isp {
>> + status = "okay";
>> +};
>> +
>> +&clock_fsys0 {
>> + status = "okay";
>> +};
>> +
>> +&clock_fsys1 {
>> + status = "okay";
>> +};
>> +
>> +&smmu_peric {
>> + status = "okay";
>> +};
>> +
>> +&smmu_imem {
>> + status = "okay";
>> +};
>> +
>> +&smmu_fsys0 {
>> + status = "okay";
>> +};
>> +
>> +&hsi2c_0 {
>> + status = "okay";
>> +};
>> +
>> +&hsi2c_1 {
>> + status = "okay";
>> +};
>> +
>> +&hsi2c_2 {
>> + status = "okay";
>> +};
>> +
>> +&hsi2c_3 {
>> + status = "okay";
>> +};
>> +
>> +&hsi2c_4 {
>> + status = "okay";
>> +};
>> +
>> +&hsi2c_5 {
>> + status = "okay";
>> +};
>> +
>> +&hsi2c_6 {
>> + status = "okay";
>> +};
>> +
>> +&hsi2c_7 {
>> + status = "okay";
>> +};
>> +
>> +&pwm_0 {
>> + status = "okay";
>> +};
>> +
>> +&pwm_1 {
>> + status = "okay";
>> +};
>> +
>> +&mdma0 {
>> + status = "okay";
>> +};
>> +
>> +&mdma1 {
>> + status = "okay";
>> +};
>> +
>> +&pdma0 {
>> + status = "okay";
>> +};
>> +
>> +&pdma1 {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi
>> b/arch/arm64/boot/dts/tesla/fsd.dtsi
>> new file mode 100644
>> index 000000000000..47cd9f20566e
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
>> @@ -0,0 +1,715 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Tesla Full Self-Driving SoC device tree source
>> + *
>> + * Copyright (c) 2017-2022 Samsung Electronics Co., Ltd.
>> + * https://www.samsung.com
>> + * Copyright (c) 2017-2022 Tesla, Inc.
>> + * https://www.tesla.com
>> + */
>> +
>> +#include <dt-bindings/clock/fsd-clk.h> #include
>> +<dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> + compatible = "tesla,fsd";
>> + interrupt-parent = <&gic>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + aliases {
>> + watchdog0 = &watchdog_0;
>> + watchdog1 = &watchdog_1;
>> + watchdog2 = &watchdog_2;
>> + hsi2c0 = &hsi2c_0;
>> + hsi2c1 = &hsi2c_1;
>> + hsi2c2 = &hsi2c_2;
>> + hsi2c3 = &hsi2c_3;
>> + hsi2c4 = &hsi2c_4;
>> + hsi2c5 = &hsi2c_5;
>> + hsi2c6 = &hsi2c_6;
>> + hsi2c7 = &hsi2c_7;
>
>Drop all these non-standard aliases.
>
>> + };
>> +
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + cpu-map {
>> + cluster0 {
>> + core0 {
>> + cpu = <&cpucl0_0>;
>> + };
>> + core1 {
>> + cpu = <&cpucl0_1>;
>> + };
>> + core2 {
>> + cpu = <&cpucl0_2>;
>> + };
>> + core3 {
>> + cpu = <&cpucl0_3>;
>> + };
>> + };
>> +
>> + cluster1 {
>> + core0 {
>> + cpu = <&cpucl1_0>;
>> + };
>> + core1 {
>> + cpu = <&cpucl1_1>;
>> + };
>> + core2 {
>> + cpu = <&cpucl1_2>;
>> + };
>> + core3 {
>> + cpu = <&cpucl1_3>;
>> + };
>> + };
>> +
>> + cluster2 {
>> + core0 {
>> + cpu = <&cpucl2_0>;
>> + };
>> + core1 {
>> + cpu = <&cpucl2_1>;
>> + };
>> + core2 {
>> + cpu = <&cpucl2_2>;
>> + };
>> + core3 {
>> + cpu = <&cpucl2_3>;
>> + };
>> + };
>> + };
>> +
>> + /* Cluster 0 */
>> + cpucl0_0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x000>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + cpucl0_1: cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x001>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + cpucl0_2: cpu@2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x002>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + cpucl0_3: cpu@3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x003>;
>> + enable-method = "psci";
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + /* Cluster 1 */
>> + cpucl1_0: cpu@100 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x100>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + cpucl1_1: cpu@101 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x101>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + cpucl1_2: cpu@102 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x102>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + cpucl1_3: cpu@103 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x103>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + /* Cluster 2 */
>> + cpucl2_0: cpu@200 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x200>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + cpucl2_1: cpu@201 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x201>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + cpucl2_2: cpu@202 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x202>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + cpucl2_3: cpu@203 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a72";
>> + reg = <0x0 0x203>;
>> + enable-method = "psci";
>> + clock-frequency = <2400000000>;
>> + cpu-idle-states = <&CPU_SLEEP>;
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + idle-states {
>> + entry-method = "arm,psci";
>> +
>> + CPU_SLEEP: cpu-sleep {
>> + idle-state-name = "c2";
>> + compatible = "arm,idle-state";
>> + local-timer-stop;
>> + arm,psci-suspend-param = <0x0010000>;
>> + entry-latency-us = <30>;
>> + exit-latency-us = <75>;
>> + min-residency-us = <300>;
>> + status = "okay";
>> + };
>> + };
>> +
>> + L2_0: l2-cache0 {
>> + compatible = "cache";
>> + };
>> + };
>> +
>> + arm-pmu {
>> + compatible = "arm,armv8-pmuv3";
>> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-affinity = <&cpucl0_0>, <&cpucl0_1>, <&cpucl0_2>,
>> + <&cpucl0_3>, <&cpucl1_0>, <&cpucl1_1>,
>> + <&cpucl1_2>, <&cpucl1_3>, <&cpucl2_0>,
>> + <&cpucl2_1>, <&cpucl2_2>, <&cpucl2_3>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci";
>> + method = "smc";
>
>> + cpu_on = <0xC4000003>;
>> + cpu_suspend = <0xC4000001>;
>> + cpu_off = <0x84000002>;
>
>These codes are standardized since forever. Fix your firmware.
>
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
>> + };
>> +
>> + fin_pll: clock {
>> + compatible = "fixed-clock";
>> + clock-output-names = "fin_pll";
>> + #clock-cells = <0>;
>> + };
>> +
>> + soc: soc {
>
>soc@0
>
>You should see a warning for this.
>
>> + compatible = "simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges = <0x0 0x0 0x0 0x0 0x0 0x18000000>;
>> + dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
>> +
>> + gic: interrupt-controller@10400000 {
>> + compatible = "arm,gic-v3";
>> + #interrupt-cells = <3>;
>> + interrupt-controller;
>> + reg = <0x0 0x10400000 0x0 0x10000>, /* GICD */
>> + <0x0 0x10600000 0x0 0x200000>; /* GICR_RD+GICR_SGI */
>> + };
>> +
>> + smmu_isp: iommu@12100000 {
>> + compatible = "arm,mmu-500";
>> + reg = <0x0 0x12100000 0x0 0x10000>;
>> + #iommu-cells = <2>;
>> + #global-interrupts = <11>;
>> + interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, /* Global
>secure fault */
>> + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, /* Global non-
>secure fault */
>> + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, /* Combined
>secure interrupt */
>> + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, /* Combined
>non-secure interrupt */
>> + /* Performance counter interrupts */
>> + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_CSI
>*/
>> + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_0
>*/
>> + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_1
>*/
>> + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* for
>CAM_ISP_0 */
>> + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* for
>CAM_ISP_1 */
>> + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, /* for
>CAM_MFC_0 */
>> + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, /* for
>CAM_MFC_1 */
>> + /* Per context non-secure context interrupts, 0-7
>interrupts */
>> + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_0 */
>> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_1 */
>> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_2 */
>> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_3 */
>> + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_4 */
>> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_5 */
>> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_6 */
>> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; /* for
>CONTEXT_7 */
>> + status = "disabled";
>
>IOMMU isn't really board specific, should it really be disabled?
>
>> + };
>> +
>> + smmu_imem: iommu@10200000 {
>> + compatible = "arm,mmu-500";
>> + reg = <0x0 0x10200000 0x0 0x10000>;
>> + #iommu-cells = <2>;
>> + #global-interrupts = <7>;
>> + interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* Global
>secure fault */
>> + <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, /* Global non-
>secure fault */
>> + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, /* Combined
>secure interrupt */
>> + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, /* Combined
>non-secure interrupt */
>> + /* Performance counter interrupts */
>> + <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_0 */
>> + <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_1 */
>> + <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, /* for IMEM_0
>*/
>> + /* Per context non-secure context interrupts, 0-3
>interrupts */
>> + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_0 */
>> + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_1 */
>> + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_2 */
>> + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; /* for
>CONTEXT_3 */
>> + status = "disabled";
>> + };
>> +
>> + smmu_peric: iommu@14900000 {
>> + compatible = "arm,mmu-500";
>> + reg = <0x0 0x14900000 0x0 0x10000>;
>> + #iommu-cells = <2>;
>> + #global-interrupts = <5>;
>> + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, /* Global
>secure fault */
>> + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, /* Global non-
>secure fault */
>> + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* Combined
>secure interrupt */
>> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* Combined
>non-secure interrupt */
>> + /* Performance counter interrupts */
>> + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, /* for PERIC */
>> + /* Per context non-secure context interrupts, 0-1
>interrupts */
>> + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* for
>CONTEXT_0 */
>> + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; /* for
>CONTEXT_1 */
>> + status = "disabled";
>> + };
>> +
>> + smmu_fsys0: iommu@15450000 {
>> + compatible = "arm,mmu-500";
>> + reg = <0x0 0x15450000 0x0 0x10000>;
>> + #iommu-cells = <2>;
>> + #global-interrupts = <5>;
>> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, /* Global
>secure fault */
>> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, /* Global non-
>secure fault */
>> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* Combined
>secure interrupt */
>> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-
>secure interrupt */
>> + /* Performance counter interrupts */
>> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS0 */
>> + /* Per context non-secure context interrupts, 0-1
>interrupts */
>> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0
>*/
>> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1
>*/
>> + status = "disabled";
>> + };
>> +
>> + clock_cmu: clock-controller@11C10000 {
>
>Lowercase hex for unit-addresses.
>
>Also, arrange nodes in address order.
>
>> + compatible = "tesla,fsd-clock-cmu";
>> + reg = <0x0 0x11C10000 0x0 0x3000>;
>> + #clock-cells = <1>;
>> + clocks = <&fin_pll>;
>> + clock-names = "fin_pll";
>> + status = "disabled";
>> + };
>> +
>> + clock_imem: clock-controller@10010000 {
>> + compatible = "tesla,fsd-clock-imem";
>> + reg = <0x0 0x10010000 0x0 0x3000>;
>> + #clock-cells = <1>;
>> + clocks = <&fin_pll>,
>> + <&clock_cmu DOUT_CMU_IMEM_TCUCLK>,
>> + <&clock_cmu DOUT_CMU_IMEM_ACLK>,
>> + <&clock_cmu DOUT_CMU_IMEM_DMACLK>;
>> + clock-names = "fin_pll",
>> + "dout_cmu_imem_tcuclk",
>> + "dout_cmu_imem_aclk",
>> + "dout_cmu_imem_dmaclk";
>> + status = "disabled";
>> + };
>> +
>> + clock_peric: clock-controller@14010000 {
>> + compatible = "tesla,fsd-clock-peric";
>> + reg = <0x0 0x14010000 0x0 0x3000>;
>> + #clock-cells = <1>;
>> + clocks = <&fin_pll>,
>> + <&clock_cmu DOUT_CMU_PLL_SHARED0_DIV4>,
>> + <&clock_cmu DOUT_CMU_PERIC_SHARED1DIV36>,
>> + <&clock_cmu DOUT_CMU_PERIC_SHARED0DIV3_TBUCLK>,
>> + <&clock_cmu DOUT_CMU_PERIC_SHARED0DIV20>,
>> + <&clock_cmu
>DOUT_CMU_PERIC_SHARED1DIV4_DMACLK>;
>> + clock-names = "fin_pll",
>> + "dout_cmu_pll_shared0_div4",
>> + "dout_cmu_peric_shared1div36",
>> + "dout_cmu_peric_shared0div3_tbuclk",
>> + "dout_cmu_peric_shared0div20",
>> + "dout_cmu_peric_shared1div4_dmaclk";
>> + status = "disabled";
>> + };
>> +
>> + clock_fsys0: clock-controller@15010000 {
>> + compatible = "tesla,fsd-clock-fsys0";
>> + reg = <0x0 0x15010000 0x0 0x3000>;
>> + #clock-cells = <1>;
>> + clocks = <&fin_pll>,
>> + <&clock_cmu DOUT_CMU_PLL_SHARED0_DIV6>,
>> + <&clock_cmu DOUT_CMU_FSYS0_SHARED1DIV4>,
>> + <&clock_cmu DOUT_CMU_FSYS0_SHARED0DIV4>;
>> + clock-names = "fin_pll",
>> + "dout_cmu_pll_shared0_div6",
>> + "dout_cmu_fsys0_shared1div4",
>> + "dout_cmu_fsys0_shared0div4";
>> + status = "disabled";
>> + };
>> +
>> + clock_fsys1: clock-controller@16810000 {
>> + compatible = "tesla,fsd-clock-fsys1";
>> + reg = <0x0 0x16810000 0x0 0x3000>;
>> + #clock-cells = <1>;
>> + clocks = <&fin_pll>,
>> + <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
>> + <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
>> + clock-names = "fin_pll",
>> + "dout_cmu_fsys1_shared0div8",
>> + "dout_cmu_fsys1_shared0div4";
>> + status = "disabled";
>> + };
>> +
>> + clock_mfc: clock-controller@12810000 {
>> + compatible = "tesla,fsd-clock-mfc";
>> + reg = <0x0 0x12810000 0x0 0x3000>;
>> + #clock-cells = <1>;
>> + clocks = <&fin_pll>;
>> + clock-names = "fin_pll";
>> + status = "disabled";
>> + };
>> +
>> + clock_csi: clock-controller@12610000 {
>> + compatible = "tesla,fsd-clock-cam_csi";
>> + reg = <0x0 0x12610000 0x0 0x3000>;
>> + #clock-cells = <1>;
>> + clocks = <&fin_pll>;
>> + clock-names = "fin_pll";
>> + status = "disabled";
>> + };
>> +
>> + mdma0: mdma@10100000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x0 0x10100000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
>> + #dma-cells = <1>;
>> + #dma-channels = <8>;
>> + #dma-requests = <32>;
>> + clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>;
>> + clock-names = "apb_pclk";
>> + iommus = <&smmu_imem 0x800 0x0>;
>> + status = "disabled";
>> + };
>> +
>> + mdma1: mdma@10110000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x0 0x10110000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
>> + #dma-cells = <1>;
>> + #dma-channels = <8>;
>> + #dma-requests = <32>;
>> + clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>;
>> + clock-names = "apb_pclk";
>> + iommus = <&smmu_imem 0x801 0x0>;
>> + status = "disabled";
>> + };
>> +
>> + pdma0: pdma@14280000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x0 0x14280000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
>> + #dma-cells = <1>;
>> + #dma-channels = <8>;
>> + #dma-requests = <32>;
>> + clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>;
>> + clock-names = "apb_pclk";
>> + iommus = <&smmu_peric 0x2 0x0>;
>> + status = "disabled";
>> + };
>> +
>> + pdma1: pdma@14290000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x0 0x14290000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
>> + #dma-cells = <1>;
>> + #dma-channels = <8>;
>> + #dma-requests = <32>;
>> + clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>;
>> + clock-names = "apb_pclk";
>> + iommus = <&smmu_peric 0x1 0x0>;
>> + status = "disabled";
>> + };
>> +
>> + mct: mct@10040000 {
>> + compatible = "samsung,exynos4210-mct";
>> + reg = <0x0 0x10040000 0x0 0x800>;
>> + interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>;
>> + clock-names = "fin_pll", "mct";
>> + };
>> +
>> + serial_0: serial@14180000 {
>> + compatible = "samsung,exynos4210-uart";
>> + reg = <0x0 0x14180000 0x0 0x100>;
>> + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
>> + dmas = <&pdma1 0>, <&pdma1 1>;
>> + dma-names = "tx", "rx";
>> + clocks = <&clock_peric PERIC_PCLK_UART0>,
>> + <&clock_peric PERIC_SCLK_UART0>;
>> + clock-names = "uart", "clk_uart_baud0";
>> + status = "disabled";
>> + };
>> +
>> + serial_1: serial@14190000 {
>> + compatible = "samsung,exynos4210-uart";
>> + reg = <0x0 0x14190000 0x0 0x100>;
>> + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
>> + dmas = <&pdma1 2>, <&pdma1 3>;
>> + dma-names = "tx", "rx";
>> + clocks = <&clock_peric PERIC_PCLK_UART1>,
>> + <&clock_peric PERIC_SCLK_UART1>;
>> + clock-names = "uart", "clk_uart_baud0";
>> + status = "disabled";
>> + };
>> +
>> + pmu_system_controller: system-controller@11400000 {
>> + compatible = "samsung,exynos7-pmu", "syscon";
>> + reg = <0x0 0x11400000 0x0 0x5000>;
>> + };
>> +
>> + watchdog_0: watchdog@100A0000 {
>> + compatible = "samsung,exynos7-wdt";
>> + reg = <0x0 0x100A0000 0x0 0x100>;
>> + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
>> + samsung,syscon-phandle = <&pmu_system_controller>;
>> + clocks = <&fin_pll>;
>> + clock-names = "watchdog";
>> + interrupt-mode = <1>;
>> + };
>> +
>> + watchdog_1: watchdog@100B0000 {
>> + compatible = "samsung,exynos7-wdt";
>> + reg = <0x0 0x100B0000 0x0 0x100>;
>> + interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
>> + samsung,syscon-phandle = <&pmu_system_controller>;
>> + clocks = <&fin_pll>;
>> + clock-names = "watchdog";
>> + interrupt-mode = <1>;
>> + };
>> +
>> + watchdog_2: watchdog@100C0000 {
>> + compatible = "samsung,exynos7-wdt";
>> + reg = <0x0 0x100C0000 0x0 0x100>;
>> + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
>> + samsung,syscon-phandle = <&pmu_system_controller>;
>> + clocks = <&fin_pll>;
>> + clock-names = "watchdog";
>> + interrupt-mode = <1>;
>> + };
>> +
>> + pwm_0: pwm@14100000 {
>> + compatible = "samsung,exynos4210-pwm";
>> + reg = <0x0 0x14100000 0x0 0x100>;
>> + samsung,pwm-outputs = <0>, <1>, <2>, <3>;
>> + #pwm-cells = <3>;
>> + clocks = <&clock_peric PERIC_PWM0_IPCLKPORT_I_PCLK_S0>;
>> + clock-names = "timers";
>> + status = "disabled";
>> + };
>> +
>> + pwm_1: pwm@14110000 {
>> + compatible = "samsung,exynos4210-pwm";
>> + reg = <0x0 0x14110000 0x0 0x100>;
>> + samsung,pwm-outputs = <0>, <1>, <2>, <3>;
>> + #pwm-cells = <3>;
>> + clocks = <&clock_peric PERIC_PWM1_IPCLKPORT_I_PCLK_S0>;
>> + clock-names = "timers";
>> + status = "disabled";
>> + };
>> +
>> + hsi2c_0: hsi2c@14200000 {
>> + compatible = "samsung,exynos7-hsi2c";
>> + reg = <0x0 0x14200000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&hs_i2c0_bus>;
>> + clocks = <&clock_peric PERIC_PCLK_HSI2C0>;
>> + clock-names = "hsi2c";
>> + status = "disabled";
>> + };
>> +
>> + hsi2c_1: hsi2c@14210000 {
>> + compatible = "samsung,exynos7-hsi2c";
>> + reg = <0x0 0x14210000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&hs_i2c1_bus>;
>> + clocks = <&clock_peric PERIC_PCLK_HSI2C1>;
>> + clock-names = "hsi2c";
>> + status = "disabled";
>> + };
>> +
>> + hsi2c_2: hsi2c@14220000 {
>> + compatible = "samsung,exynos7-hsi2c";
>> + reg = <0x0 0x14220000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&hs_i2c2_bus>;
>> + clocks = <&clock_peric PERIC_PCLK_HSI2C2>;
>> + clock-names = "hsi2c";
>> + status = "disabled";
>> + };
>> +
>> + hsi2c_3: hsi2c@14230000 {
>> + compatible = "samsung,exynos7-hsi2c";
>> + reg = <0x0 0x14230000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&hs_i2c3_bus>;
>> + clocks = <&clock_peric PERIC_PCLK_HSI2C3>;
>> + clock-names = "hsi2c";
>> + status = "disabled";
>> + };
>> +
>> + hsi2c_4: hsi2c@14240000 {
>> + compatible = "samsung,exynos7-hsi2c";
>> + reg = <0x0 0x14240000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&hs_i2c4_bus>;
>> + clocks = <&clock_peric PERIC_PCLK_HSI2C4>;
>> + clock-names = "hsi2c";
>> + status = "disabled";
>> + };
>> +
>> + hsi2c_5: hsi2c@14250000 {
>> + compatible = "samsung,exynos7-hsi2c";
>> + reg = <0x0 0x14250000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&hs_i2c5_bus>;
>> + clocks = <&clock_peric PERIC_PCLK_HSI2C5>;
>> + clock-names = "hsi2c";
>> + status = "disabled";
>> + };
>> +
>> + hsi2c_6: hsi2c@14260000 {
>> + compatible = "samsung,exynos7-hsi2c";
>> + reg = <0x0 0x14260000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&hs_i2c6_bus>;
>> + clocks = <&clock_peric PERIC_PCLK_HSI2C6>;
>> + clock-names = "hsi2c";
>> + status = "disabled";
>> + };
>> +
>> + hsi2c_7: hsi2c@14270000 {
>> + compatible = "samsung,exynos7-hsi2c";
>> + reg = <0x0 0x14270000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&hs_i2c7_bus>;
>> + clocks = <&clock_peric PERIC_PCLK_HSI2C7>;
>> + clock-names = "hsi2c";
>> + status = "disabled";
>> + };
>> + };
>> +};
>> --
>> 2.17.1
>>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-15 15:33 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220113122302epcas5p1d45c0714fe286f8f91d0f28c3fad86e4@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 00/23] Add support for Tesla Full Self-Driving (FSD) SoC Alim Akhtar
[not found] ` <CGME20220113122311epcas5p4b7c253b49dce3bd3580407fcf312e70e@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 01/23] dt-bindings: clock: Document FSD CMU bindings Alim Akhtar
2022-01-13 12:40 ` Krzysztof Kozlowski
2022-01-14 5:48 ` Alim Akhtar
2022-01-13 23:33 ` Rob Herring
[not found] ` <CGME20220113122317epcas5p11937078e2701b319a13b29e044224ec0@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 02/23] dt-bindings: clock: Add bindings definitions for FSD CMU blocks Alim Akhtar
[not found] ` <CGME20220113122324epcas5p105c53b448b5801813a02a88c6107a2f3@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 03/23] clk: samsung: fsd: Add initial clock support Alim Akhtar
2022-01-13 12:49 ` Krzysztof Kozlowski
2022-01-14 6:16 ` Alim Akhtar
[not found] ` <CGME20220113122330epcas5p46ae5cd30950b1d9126479231dcf5da49@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 04/23] clk: samsung: fsd: Add cmu_peric block clock information Alim Akhtar
2022-01-13 12:55 ` Krzysztof Kozlowski
2022-01-14 6:30 ` Alim Akhtar
[not found] ` <CGME20220113122334epcas5p2d5958c77b0635e848f81ed2c5c98cdd5@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 05/23] clk: samsung: fsd: Add cmu_fsys0 " Alim Akhtar
[not found] ` <CGME20220113122338epcas5p17ad3a31077b98388c0a6779904ee651e@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 06/23] clk: samsung: fsd: Add cmu_fsys1 " Alim Akhtar
[not found] ` <CGME20220113122343epcas5p23831143e4e8fb92be8ad362f4817c03b@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 07/23] clk: samsung: fsd: Add cmu_imem block " Alim Akhtar
[not found] ` <CGME20220113122346epcas5p41a7d6712c07544e99795ef5465f1f106@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 08/23] clk: samsung: fsd: Add cmu_mfc " Alim Akhtar
[not found] ` <CGME20220113122351epcas5p45f49a559af9f6d0c6ba573594f95561d@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 09/23] clk: samsung: fsd: Add cam_csi " Alim Akhtar
[not found] ` <CGME20220113122354epcas5p19e5cebe9e85e9ba1758fa0b9d7d1ef75@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 10/23] dt-bindings: pinctrl: samsung: Add compatible for Tesla FSD SoC Alim Akhtar
2022-01-13 12:27 ` Krzysztof Kozlowski
2022-01-14 5:44 ` Alim Akhtar
2022-01-14 7:49 ` Krzysztof Kozlowski
2022-01-14 8:38 ` Alim Akhtar
[not found] ` <CGME20220113122400epcas5p34363ba8f477b4c273d601d0b64324afa@epcas5p3.samsung.com>
2022-01-13 12:11 ` [PATCH 11/23] pinctrl: samsung: add FSD SoC specific data Alim Akhtar
2022-01-13 12:57 ` Krzysztof Kozlowski
2022-01-16 12:05 ` Linus Walleij
[not found] ` <CGME20220113122404epcas5p4aa1c3ac09510eb55cce5fdd0791993a6@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 12/23] dt-bindings: add vendor prefix for Tesla Alim Akhtar
2022-01-13 12:58 ` Krzysztof Kozlowski
2022-01-14 7:10 ` Alim Akhtar
2022-01-16 12:09 ` Linus Walleij
[not found] ` <CGME20220113122408epcas5p45053d1bf0acf2d8233a98b6c1abab6eb@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 13/23] dt-bindings: arm: add Tesla FSD ARM SoC Alim Akhtar
2022-01-13 12:33 ` Krzysztof Kozlowski
2022-01-14 16:57 ` Alim Akhtar
2022-01-14 17:29 ` Krzysztof Kozlowski
2022-01-17 13:26 ` Alim Akhtar
2022-01-17 14:14 ` Arnd Bergmann
2022-01-17 15:00 ` Krzysztof Kozlowski
2022-01-17 20:41 ` Olof Johansson
[not found] ` <CGME20220113122413epcas5p46cb2cafb73936c423017240f98f72845@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 14/23] arm64: dts: fsd: Add initial device tree support Alim Akhtar
2022-01-13 13:16 ` Krzysztof Kozlowski
2022-01-13 14:23 ` Arnd Bergmann
2022-01-14 8:13 ` Alim Akhtar
2022-01-14 2:08 ` kernel test robot
2022-01-14 2:45 ` Rob Herring
2022-01-15 15:31 ` Alim Akhtar [this message]
[not found] ` <CGME20220113122417epcas5p47398a5190cdf4c574c6f1762918b549f@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 15/23] arm64: dts: fsd: Add initial pinctrl support Alim Akhtar
2022-01-13 13:19 ` Krzysztof Kozlowski
2022-01-17 13:44 ` Alim Akhtar
2022-01-17 13:50 ` Krzysztof Kozlowski
2022-01-18 14:58 ` Alim Akhtar
[not found] ` <CGME20220113122421epcas5p1af8422fc992801ced57e0439b48ad08e@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 16/23] arm64: defconfig: Enable Tesla FSD SoC Alim Akhtar
[not found] ` <CGME20220113122427epcas5p1885d8b3b735e8f127b6694a309796e5a@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 17/23] Documentation: bindings: Add fsd spi compatible in dt-bindings document Alim Akhtar
2022-01-13 13:21 ` Krzysztof Kozlowski
2022-01-13 13:24 ` Krzysztof Kozlowski
2022-01-14 7:17 ` Alim Akhtar
[not found] ` <CGME20220113122435epcas5p18e6a2699f193b9e1287588278a570235@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 18/23] spi: s3c64xx: Add spi port configuration for Tesla FSD SoC Alim Akhtar
2022-01-13 12:59 ` Mark Brown
2022-01-14 7:15 ` Alim Akhtar
2022-01-13 13:28 ` Krzysztof Kozlowski
2022-01-16 12:12 ` Linus Walleij
[not found] ` <CGME20220113122440epcas5p4651d7cb2fc6d6a70fd5eaab5eadcf996@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 19/23] arm64: dts: fsd: Add SPI device nodes Alim Akhtar
2022-01-13 13:30 ` Krzysztof Kozlowski
[not found] ` <CGME20220113122447epcas5p266d44c8df143229d22dfa700c285a786@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 20/23] dt-bindings: iio: adc: exynos-adc: Add ADC-V3 variant Alim Akhtar
2022-01-13 13:32 ` Krzysztof Kozlowski
2022-01-17 9:47 ` Jonathan Cameron
2022-01-17 12:42 ` Alim Akhtar
[not found] ` <CGME20220113122452epcas5p201a3a87d0e9c0e9f449a90ed62de1f1c@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 21/23] iio: adc: exynos-adc: Add support for ADC V3 controller Alim Akhtar
2022-01-16 11:19 ` Jonathan Cameron
2022-01-17 12:20 ` Alim Akhtar
[not found] ` <CGME20220113122456epcas5p35f6406ab03af58d2e56b0b7304d4d002@epcas5p3.samsung.com>
2022-01-13 12:11 ` [PATCH 22/23] arm64: dts: fsd: Add ADC device tree node Alim Akhtar
2022-01-13 13:33 ` Krzysztof Kozlowski
[not found] ` <CGME20220113122502epcas5p37747b0c5c242c0571d294b9245963a1c@epcas5p3.samsung.com>
2022-01-13 12:11 ` [PATCH 23/23] clocksource: exynos_mct: Add support for handling three clusters Alim Akhtar
2022-01-13 13:36 ` Krzysztof Kozlowski
2022-01-13 12:31 ` [PATCH 00/23] Add support for Tesla Full Self-Driving (FSD) SoC Krzysztof Kozlowski
2022-01-13 18:53 ` Olof Johansson
2022-01-14 5:41 ` Alim Akhtar
2022-01-14 7:34 ` Krzysztof Kozlowski
2022-01-16 9:23 ` Pavel Machek
2022-01-17 20:53 ` Olof Johansson
2022-01-17 23:10 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='08ba01d80a24$f79a88f0$e6cf9ad0$@samsung.com' \
--to=alim.akhtar@samsung.com \
--cc=ajaykumar.rs@samsung.com \
--cc=arjun.kv@samsung.com \
--cc=aswani.reddy@samsung.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-fsd@tesla.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=pankaj.dubey@samsung.com \
--cc=rcsekar@samsung.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=s.prashar@samsung.com \
--cc=soc@kernel.org \
--cc=sriranjani.p@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).