[RFC PATCH 2/7] ARM: dts: vfxxx: Include support for qspi1 functionality.

[stefan@agner.ch (Stefan Agner)]

On 2015-07-01 22:20, Cory Tusar wrote:
> This commit extends the existing Vybrid QSPI devicetree implementation
> to also describe the qspi1 functional block.
> 
> Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com>
> ---
>  arch/arm/boot/dts/vfxxx.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
> index 089a263..a7c370e 100644
> --- a/arch/arm/boot/dts/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/vfxxx.dtsi
> @@ -251,6 +251,19 @@
>  				status = "disabled";
>  			};
>  
> +			qspi1: quadspi at 400c4000 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				compatible = "fsl,vf610-qspi";
> +				reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
> +				reg-names = "QuadSPI", "QuadSPI-memory";
> +				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clks VF610_CLK_QSPI1_EN>,
> +					<&clks VF610_CLK_QSPI1>;
> +				clock-names = "qspi_en", "qspi";
> +				status = "disabled";
> +			};
> +
>  			iomuxc: iomuxc at 40048000 {
>  				compatible = "fsl,vf610-iomuxc";
>  				reg = <0x40048000 0x1000>;

This seem to be at the wrong place under aips0. qspi1 should be under
aips1. just before fec0. But other than that, I checked the addresses
looks good to me. Hence with that change applied you can include:

Reviewed-by: Stefan Agner <stefan@agner.ch>

--
Stefan