From mboxrd@z Thu Jan  1 00:00:00 1970
From: david@lechnology.com (David Lechner)
Date: Thu, 5 Jan 2017 16:49:03 -0600
Subject: [PATCH 1/2] ARM: dts: da850: Add usb device node
In-Reply-To: <20161121165920.29809-2-ahaslam@baylibre.com>
References: <20161121165920.29809-1-ahaslam@baylibre.com>
 <20161121165920.29809-2-ahaslam@baylibre.com>
Message-ID: <0dd074af-a4ae-34fa-a404-1116b554135b@lechnology.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Sekhar,

On 11/21/2016 10:59 AM, Axel Haslam wrote:
> Add the usb1 device node for the da850 soc.
> This will allow boards to use the usb1 port
> when booting through DT.
>
> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
> ---
>  arch/arm/boot/dts/da850.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 1bb1f6d..fbd50d6 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -406,6 +406,14 @@
>  					>;
>  			status = "disabled";
>  		};
> +		usb1: usb at 225000 {
> +			compatible = "ti,da830-ohci";
> +			reg = <0x225000 0x1000>;
> +			interrupts = <59>;
> +			phys = <&usb_phy 1>;
> +			phy-names = "usb-phy";
> +			status = "disabled";
> +		};
>  		gpio: gpio at 226000 {
>  			compatible = "ti,dm6441-gpio";
>  			gpio-controller;
>


This patch can be pickup up now. I have just tested with next-20171015 + 
linux-davinci/master.