From mboxrd@z Thu Jan 1 00:00:00 1970 From: amit.kucheria@linaro.org (Amit Kucheria) Date: Thu, 12 Jul 2018 14:09:08 +0530 Subject: [PATCH v7 7/7] arm64: dts: sdm845: Add tsens nodes In-Reply-To: References: Message-ID: <0dfdbfa82edced85ea5be02e1d74d73d232c7a08.1531384019.git.amit.kucheria@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org SDM845 has two tsens blocks, one with 13 sensors and the other with 8 sensors. It uses version 2 of the TSENS IP, so use the fallback property to allow more common code. Signed-off-by: Amit Kucheria Reviewed-by: Bjorn Andersson Tested-by: Matthias Kaehlcke --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb..01ff146 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -221,6 +221,22 @@ #interrupt-cells = <2>; }; + tsens0: thermal-sensor at c263000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, /* TM */ + <0xc222000 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor at c265000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc265000 0x1ff>, /* TM */ + <0xc223000 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + spmi_bus: spmi at c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0x1100>, -- 2.7.4