From mboxrd@z Thu Jan 1 00:00:00 1970 From: kgene.kim@samsung.com (Kukjin Kim) Date: Fri, 09 Nov 2012 19:09:06 +0900 Subject: [PATCH v2] ARM: EXYNOS: origen: Add missing USB regulators In-Reply-To: <11762974.EgWP4VdH3P@amdc1227> References: <11762974.EgWP4VdH3P@amdc1227> Message-ID: <0e8201cdbe62$409dfaa0$c1d9efe0$%kim@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Tomasz Figa wrote: > > This patch adds missing USB OTG regulators needed for s3c-hsotg driver > to work on Origen board. > > Confirmed with schematics of and tested on Origen board. > > Signed-off-by: Tomasz Figa > --- > arch/arm/mach-exynos/mach-origen.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach- > exynos/mach-origen.c > index d8dc6d7..bf34704 100644 > --- a/arch/arm/mach-exynos/mach-origen.c > +++ b/arch/arm/mach-exynos/mach-origen.c > @@ -100,6 +100,7 @@ static struct regulator_consumer_supply __initdata > ldo3_consumer[] = { > REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */ > REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */ > REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */ > + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */ > }; > static struct regulator_consumer_supply __initdata ldo6_consumer[] = { > REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */ > @@ -110,6 +111,7 @@ static struct regulator_consumer_supply __initdata > ldo7_consumer[] = { > static struct regulator_consumer_supply __initdata ldo8_consumer[] = { > REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */ > REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */ > + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */ > }; > static struct regulator_consumer_supply __initdata ldo9_consumer[] = { > REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT > */ > -- > 1.8.0 Applied, thanks. Best regards, Kgene. -- Kukjin Kim , Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.